r/Welding • • 12h ago

Rate my weld!!. I'm just a farm kid not a welder I only weld to fix or build equipment. .Tig torch and wire feed in the pictures.

Thumbnail
gallery
85 Upvotes

r/Welding • • 19h ago

Finally figuring out horizontal open root tig. Wish I had some pictures of the first few.

Thumbnail
gallery
15 Upvotes

Ended up settling on a little bit over a 5/32 gap, 1/8 filler rod and 120 amps pretty much to the floor.


r/Welding • • 3h ago

Discussion (Add topic here) Rate my welding 🥴

Thumbnail
gallery
13 Upvotes

What do you think? TIG welding (without purging for utility water)

Positional welding (from a lift, somewhere between pipes in mid-air with minimal space on a ladder, on makeshift tables, we know construction sites) with no alignment clamps, fixtures, turning tables, or holders.

Pipes cut manually with a grinder and also ground. No precise orbital cutting and Sometimes butt-welded without a bevel (depending on the situation)


r/Welding • • 6h ago

Need Help I'm getting a new welder but need help choosing

Thumbnail
gallery
13 Upvotes

I'm down to these 3 welding machine and need help deciding


r/Welding • • 8h ago

Hardfacing a Wildcat

Post image
12 Upvotes

crossposting cause you guys might enjoy the fumes


r/Welding • • 12h ago

Love my Pipeliner's Cloud carbon fiber. Question about auto darkening

Post image
9 Upvotes

i got this Lincoln auto lens in it. had the hood for home use for about 6 months. 10-20 hours of use and i love it. much lighter than my sugar scoop fibremetal.

i'm only concerned that the auto dark shade had no slot for a clear lens on the eye side not the work side. i cant imagine in a shop setting with the dust and sweat dripping on it. seems like it would scratch easily and be kind of a one time use. this lens has gone up since i bought it too. i'm not too concerned with moving the shade settings etc. wondering if anyone has tried a 2x4 lens in behind the spring plate and had it work out okay.

thanks!

here's the hood if you're interested in one


r/Welding • • 13h ago

Need Help MagTorch MT585OX brazing kit help

Thumbnail
gallery
8 Upvotes

I received this MagTorch brazing kit second hand and am having trouble getting oxygen to flow through to the tip. I believe I have all the necessary parts, but not 100% sure.

When I received this torch the oxygen valve had either come undone/ been disassembled and I for the life of me cannot reassemble it to function properly. In Slide 3 I’ve labeled the parts. I’ve installed the parts as:

piece 2 onto brass pin of the valve body,
piece 5 (rubber gasket(?)) on top of that,
piece 1 in center of piece 5,
Piece 3 on top of pieces 1 & 5,
And finally piece 4 (spring) onto piece 1

In this assembly, you can depress the spring and air will flow from the tank, but once the threaded valve cap is installed, nothing happens.

If anyone has one of these torches or has taken them apart in the past i’d be eternally grateful on how to get this torch up and running again.


r/Welding • • 16h ago

Need Help Snapped bolt off in the subframe. Best way to weld a nut on here?

Post image
5 Upvotes

First time having to weld a nut in a situation like this.

This is on the underside of the car, and the lower half of the cross frame(?) is rather restrictive with access.

Any advice for how you'd tackle something like this? Thanks.


r/Welding • • 13h ago

My first at home welder

4 Upvotes

Hi all, I used to work in a foundry many years ago, as was the supervisor, as well as maintenance engineer. Before this job I had never touched a welder. I got some basic on the job training but I have never been formally trained. I have probably around 1000+ hours of experience from welding with a MIG welder and probably around 300+ hours on a stick welder. I’ve always wanted to try TIG welding, and a friend has suggested they will be buying me some kind of welder for my birthday next year, so I’ve got about 6 months to decide what I want. I already know I don’t want a gasless MIG as I haven’t had any good experiences using them, so please don’t suggest a Bunnings cheap welder. I want something semi-name brand, I’m a buy once cry once kind of person. If I hardly use it, I want it to have a good resale value. Please give me your suggestions for a good welder. Thanks in advance.


r/Welding • • 1h ago

Need Help Crooked vertical posts

Post image
3 Upvotes

First time welder here. Building myself a sim rig using flux core welder. As you can clearly see, vertical posts are crooked. Is there an easier way to fix this other than grinding the welds off and redoing from scratch ? Or should I just leave it as is. Steel thickness 1.6mm (1/16 inch)


r/Welding • • 1h ago

Discussion (Add topic here) Best way to start

2 Upvotes

A friend asked me to teach their 13 year old to weld. Already set up and learning blacksmithing. I remember learning oxy-acetylene first, but in those days wire welding was less common and more expensive to get set up with. If you were going to get someone started on the right foot where would start, balancing age appropriateness (safety and complexity), acquisition of basic skills, cost to get set up, and future utility?


r/Welding • • 18h ago

Beginner question

2 Upvotes

I’m wanting to learn to weld for hobby projects. Nothing too crazy, but I’d like to be able to do some small fabrication projects at home like weld a steel tube bumper for my 4Runner, small repairs, etc.

And I’m currently trying to select a welding machine that is the best bang for buck and also something I can grow into a bit.

I was hopping for some recommendations specifically for some limitations I have:

I am a renter and all the outlets are 120v and run on 15a circuits.

Is this going to be a major limitation for my goals? Can I still find a genuinely robust machine that can run on those specs?

Appreciate any thoughts, 🙏🏻

Also, this is one machine I was looking at: https://www.amazon.com/gp/aw/d/B07TVCWDGW/ref=ox_sc_act_title_1?smid=A1PRJVQ6PVSF2D&psc=1