r/Welding • • Sep 28 '26

Monthly Safety Meeting (Every 28th of the month.)

16 Upvotes

Post anything that's happened in your shop, office, commute or home that you feel others may be able to chime in on or commiserate over.

Sharing our close calls helps others avoid them.

Simple rules:

  • This is for open, respectful discussion.
  • Close calls and near misses are eventually going to lead to injuries.
  • No off the cuff dismissal of topics brought up. If someone is concerned about something, it should be discussed.
  • No trolling. This isn't typically an issue in this community, but given the nature of safety I feel it must be said.
  • No loaded questions either.
  • Use the report tool if you have to.

This is a monthly feature, the first Saturday of each month.


r/Welding • • 24d ago

Monthly Safety Meeting (Every 28th of the month.)

3 Upvotes

Post anything that's happened in your shop, office, commute or home that you feel others may be able to chime in on or commiserate over.

Sharing our close calls helps others avoid them.

Simple rules:

  • This is for open, respectful discussion.
  • Close calls and near misses are eventually going to lead to injuries.
  • No off the cuff dismissal of topics brought up. If someone is concerned about something, it should be discussed.
  • No trolling. This isn't typically an issue in this community, but given the nature of safety I feel it must be said.
  • No loaded questions either.
  • Use the report tool if you have to.

This is a monthly feature, the first Saturday of each month.


r/Welding • • 10h ago

Rate my weld!!. I'm just a farm kid not a welder I only weld to fix or build equipment. .Tig torch and wire feed in the pictures.

Thumbnail
gallery
80 Upvotes

r/Welding • • 4h ago

Need Help I'm getting a new welder but need help choosing

Thumbnail
gallery
8 Upvotes

I'm down to these 3 welding machine and need help deciding


r/Welding • • 6h ago

Hardfacing a Wildcat

Post image
11 Upvotes

crossposting cause you guys might enjoy the fumes


r/Welding • • 1h ago

Discussion (Add topic here) Rate my welding 🥴

Thumbnail
gallery
4 Upvotes

What do you think? TIG welding (without purging for utility water)

Positional welding (from a lift, somewhere between pipes in mid-air with minimal space on a ladder, on makeshift tables, we know construction sites) with no alignment clamps, fixtures, turning tables, or holders.

Pipes cut manually with a grinder and also ground. No precise orbital cutting and Sometimes butt-welded without a bevel (depending on the situation)


r/Welding • • 1d ago

Some of my work

Thumbnail
gallery
180 Upvotes

Some 316, Carbon and P5, yes the carbon root is purged. According to customers spec. Same goes for the P5 socket, weld buildup according to their small bore piping WPS, according to the customer it's to be better protected against vibrations.


r/Welding • • 10h ago

Love my Pipeliner's Cloud carbon fiber. Question about auto darkening

Post image
9 Upvotes

i got this Lincoln auto lens in it. had the hood for home use for about 6 months. 10-20 hours of use and i love it. much lighter than my sugar scoop fibremetal.

i'm only concerned that the auto dark shade had no slot for a clear lens on the eye side not the work side. i cant imagine in a shop setting with the dust and sweat dripping on it. seems like it would scratch easily and be kind of a one time use. this lens has gone up since i bought it too. i'm not too concerned with moving the shade settings etc. wondering if anyone has tried a 2x4 lens in behind the spring plate and had it work out okay.

thanks!

here's the hood if you're interested in one


r/Welding • • 11h ago

Need Help MagTorch MT585OX brazing kit help

Thumbnail
gallery
8 Upvotes

I received this MagTorch brazing kit second hand and am having trouble getting oxygen to flow through to the tip. I believe I have all the necessary parts, but not 100% sure.

When I received this torch the oxygen valve had either come undone/ been disassembled and I for the life of me cannot reassemble it to function properly. In Slide 3 I’ve labeled the parts. I’ve installed the parts as:

piece 2 onto brass pin of the valve body,
piece 5 (rubber gasket(?)) on top of that,
piece 1 in center of piece 5,
Piece 3 on top of pieces 1 & 5,
And finally piece 4 (spring) onto piece 1

In this assembly, you can depress the spring and air will flow from the tank, but once the threaded valve cap is installed, nothing happens.

If anyone has one of these torches or has taken them apart in the past i’d be eternally grateful on how to get this torch up and running again.


r/Welding • • 17h ago

Finally figuring out horizontal open root tig. Wish I had some pictures of the first few.

Thumbnail
gallery
14 Upvotes

Ended up settling on a little bit over a 5/32 gap, 1/8 filler rod and 120 amps pretty much to the floor.


r/Welding • • 11h ago

My first at home welder

4 Upvotes

Hi all, I used to work in a foundry many years ago, as was the supervisor, as well as maintenance engineer. Before this job I had never touched a welder. I got some basic on the job training but I have never been formally trained. I have probably around 1000+ hours of experience from welding with a MIG welder and probably around 300+ hours on a stick welder. I’ve always wanted to try TIG welding, and a friend has suggested they will be buying me some kind of welder for my birthday next year, so I’ve got about 6 months to decide what I want. I already know I don’t want a gasless MIG as I haven’t had any good experiences using them, so please don’t suggest a Bunnings cheap welder. I want something semi-name brand, I’m a buy once cry once kind of person. If I hardly use it, I want it to have a good resale value. Please give me your suggestions for a good welder. Thanks in advance.


r/Welding • • 14h ago

Need Help Snapped bolt off in the subframe. Best way to weld a nut on here?

Post image
4 Upvotes

First time having to weld a nut in a situation like this.

This is on the underside of the car, and the lower half of the cross frame(?) is rather restrictive with access.

Any advice for how you'd tackle something like this? Thanks.


r/Welding • • 1d ago

My wife wants to learn to weld

44 Upvotes

Im a fairly competent welder/fabricator and I have a nice personal shop with all the fun fabrication toys. My wife and I watch a lot of welding/fab videos on youtube and she has commented several times that she would like to learn to weld.

I dont think its going to be one of those things where she picks it up and thinks its the coolest thing ever and the furiously starts welding 14 hours a day; but I do think she will have a good time and its something we can do together occasionally, IF I can teach her in a fun way.

The problem is, im a dipshit and dont have the foggiest fucking idea of how to teach someone to weld.

What do you guys recommend that I do to make it a fun experience for her?


r/Welding • • 16h ago

Beginner question

2 Upvotes

I’m wanting to learn to weld for hobby projects. Nothing too crazy, but I’d like to be able to do some small fabrication projects at home like weld a steel tube bumper for my 4Runner, small repairs, etc.

And I’m currently trying to select a welding machine that is the best bang for buck and also something I can grow into a bit.

I was hopping for some recommendations specifically for some limitations I have:

I am a renter and all the outlets are 120v and run on 15a circuits.

Is this going to be a major limitation for my goals? Can I still find a genuinely robust machine that can run on those specs?

Appreciate any thoughts, 🙏🏻

Also, this is one machine I was looking at: https://www.amazon.com/gp/aw/d/B07TVCWDGW/ref=ox_sc_act_title_1?smid=A1PRJVQ6PVSF2D&psc=1


r/Welding • • 1d ago

Critique Please practiced some mig yesterday for the first time in about a year! what can i improve on?

Thumbnail
gallery
6 Upvotes

critiques are welcome! i really want to know what i can do better and be more confident in my welds.


r/Welding • • 1d ago

Career question Is it hard to learn MIG welding?

Post image
9 Upvotes

As the title says, my job is hiring a welder for my shift, turns out they make about an extra £2 more than me even though ive been here 5 years so im considering approaching my boss to train me while i train someone up on my job.

Its mostly taking work, looks like it is more of a practice makes perfect type of thing. Ive also seen previous welders weld tests covered in splatter and got hired so my company is really good with training people.

We've had 3 welders train up for my evening shift and they all bailed, it can be hard graft and monotonous, the type of work our welders do isnt for everyone but I know what to expect. Is it something I can pick up easily and quickly with practice with trained welders in my company or will I need a course. Like I said, mainly tacking, nothing too fancy, I added a pic of the type of stuff it will be (baffle plates), some brackets etc. I currently do brazing, I know its completely different but I can manage to stick 2 bits of metal together, good enough start 😅

We use 3mm and 5mm plates so I understand that the machine will need tuned to the specific jobs but apart from that, I think its something id be able.to pick up quick enough. It seems beginner friendly, a minute to learn and a lifetime to master type of thing. Apparently the machine is auto fed and its mostly point and shoot and beginner friendly but im just going off youtube right now 😅


r/Welding • • 1d ago

need help setting up flux welder

Thumbnail
gallery
7 Upvotes

setting up a new spool and i cant seem to get my contact tube back on my gun because this wire is hanging out ? any advice is appreciated✌🏽


r/Welding • • 1d ago

First welds My first weld

Post image
23 Upvotes

Did I do good?


r/Welding • • 1d ago

Please don’t hurt me.

Post image
35 Upvotes

r/Welding • • 15h ago

Career question Vast (satellite station builder) is paying up to $58.20/hr for an "Orbital Tube Welder" role in Long Beach

Thumbnail
spacejobs.me
0 Upvotes

Tracking space-industry trades pay and this one jumped out — Vast's "Orbital Tube Welder" posting runs $24.00–$58.20/hr, more than double from floor to ceiling. That's one of the highest welding-trade ceilings logged across any space company so far (second only to a Relativity Space weld-specialist role). Presumably tied to welding pressure vessels/tubing for orbital hardware rather than general fabrication.


r/Welding • • 2d ago

Can you cut the bottom ring out of a tank, gut the internals, and replace it all in 5 weeks? Yes! Would I recommend it? No!

Thumbnail
gallery
450 Upvotes

r/Welding • • 1d ago

Need Help Can you recommend me a wire?

Post image
7 Upvotes

I need to build up some tabs with weld, and then file them into shape.

This item goes through a piece of tempered steel and is pounded into shape on the other side. This holds the piece tightly in place. The file tells me it's made of some kind of carbon steel. You can see how it's put in the picture

I need a material for my welder that once laid can be heated and forged.


r/Welding • • 1d ago

Need Help Advice on how to be more hireable as a student?

6 Upvotes

I’m 25, first year student at community college.
Currently I’m able to bang out 4G Stick, haven’t touched pipe yet. Can 3G Mig pretty alright, struggling a little at Tig, but just more hood hours needed. I’ve got a Fabrication course next semester:
While I can manage an oxy, my school flooped hard in the symbols and specifications area, while I can read a WPS for our testing plates good, I definitely know I’ll want to get my symbols understood good.

I guess my question is what are you looking for/makes a newer hire more capable? I’ve got minor warehouse experience, been in management and trained people for the past 5 years, I definitely understand I’m going in a completely different field, but I wanna make myself as malleable as easily as I can.


r/Welding • • 2d ago

Production job

Post image
163 Upvotes

Ignore the uphill i was going thru it today