r/battletech • • 1h ago

Fan Creations A 'Mech in desprate need of a new variant, the Bellephron

Post image
5 Upvotes

For those not in the know, The Bellephron BEL-1X is a scrapped prototype BattleMech dating all the way back to the 2400s. Sarna lists that it was briefly revived during the Blakist period up until 3079.

I felt that it was too cool to leave hanging with just a primitive base model in the 1X , so I decided to keep to around the blakist period.

The Bellerophon is a 'Mech from a time long passed. It was Defiance's true first venture to produce a BattleMech right here on Hesperus II, a time so long ago that we weren't even named Defiance. To put it shortly, the chassis was a failure for its time and far more so now. A Wolfhound from nearly sixty years ago has far more armor and firepower than the specs that the designers of the past promoted.

I get that this was our first 'Mech.
Yet, I don't want to give up on it. There is potential in the 60 ton weight bracket, as evidenced by new designs such as the Cauldron Born and Grigori. I have appropriated some of the prototype chassis from deep storage and this is what I've come up with as a new age prototype model:

Ferro-fiberous armor replaces the primitive load used in the original model. Across the front the 2S is mostly AC/20 proof, with only the arms going internal if a shell connects. The engine is swapped to an LFE to save weight as well, freeing the tonnage for it's new primary weapon.

Gone is the primitive SRM-4, replaced with a streak version. For full production models we plan to drop the second bin of ammo and replace it with another heat sink for increased cooling. The Large Lasers were upgraded to ER versions, and improvements in technology from before the succession wars allowed for use within a more normal system of heat sinks. As such, the lasers no longer needed to be housed within the right arm to be air cooled inbetween cycles. That placement now goes to the RAC/5 that takes up a good portion of the component. With two tones of ammo stored in a CASE protected bin, the 2S might not have perfect endurence in the field, but it does have an arsenal of a true heavy 'Mech.

This ends my report on the viablity of bringing older chassis that once failed up to current day specifications. I hope you agree, chairman. The Repbulic is looking to kneecap us all with its new bill to lower military budgets across the Inner Sphere but I highly doubt they would mind if we look to the past for new ideas.
- Chief Engineer Lisa Von Ferichk, Defiance Industries. 3083


r/battletech • • 4h ago

Meme When you have a friend

Post image
55 Upvotes

Brother from another mother

I'm pretty sure that's how the saying goes


r/battletech • • 6h ago

Lore So, roughly speaking, Inner Sphere-exclusive technologies during the Clan Invasion era included...

31 Upvotes

So, roughly speaking, Inner Sphere-exclusive technologies during the Clan Invasion era included...

Let's see...

  • TSM (Triple Strength Myomer)
  • Blazers
  • Mortars
  • Grenade Launchers
  • Rocket Launchers
  • Recoilless Rifles
  • Melee Weapons
  • C3
  • Full-Head Ejection Systems
  • Torso-Mounted Cockpits
  • Coolant Pods
  • Direct Neural Interfaces (DNI)
  • Virtual Reality Piloting Pods
  • Prototype Improved Jump Jets
  • Hardened Armor

Of course, quite a few of these are technologies the Clans consider inferior and refuse to use, while others, like DNI, were developed but never really put into practical use.

Still, I wonder if an Inner Sphere 'Mech packed with all the latest Inner Sphere technologies might actually stand a decent chance against Clan 'Mechs.

Well, getting all those technologies together would be difficult, since they're spread across several different states.

It might be fun to see a 'Mech built around Hardened Armor, Blazers, Coolant Pods, and TSM.


r/battletech • • 6h ago

Miniatures After playing for 39 years, I finally painted my first minis

Post image
149 Upvotes

The Locust is trying out a paint scheme for Scouring Sands. The Trebuchet is practice for my Gothic mechs. Both still need a coat of matte varnish, but it will be a few days before I can get that done.

Big ups to Duncan Rhodes and Sick Figs on YouTube for convincing me it was possible, and to the awesome community here for a zillion or so tips and tricks. Stay frosty, mechwarriors!


r/battletech • • 8h ago

Question ❓ Good Battle Report recommendation

7 Upvotes

Can you guys recommend me a good classic battle report channels? Most of them that I found are either alpha strike, some kind of homebrew game style, or inactive


r/battletech • • 9h ago

Meme A Discussion my team had during MW5 tonight

Post image
287 Upvotes

The Hollander gets all the credit for being the light mech with the big gun, and it did come out a few years before the Pack Hunter, but c'mon, the Pack Hunter is the far superior Light with a shoulder blaster.


r/battletech • • 9h ago

Miniatures What is THAT?!

Thumbnail
gallery
99 Upvotes

Sharing something I have been working on. Thoughts? Basically done in terms of assembly, putty, kit bashing, etc. waiting for it to dry so I can prime it.


r/battletech • • 10h ago

Miniatures My Small Army

Thumbnail
gallery
33 Upvotes

Most are primed, but the unprimed ones I just recently got. I also recently got an electric raising desk, so I wont have to uncomfortably hunch over to paint them.


r/battletech • • 10h ago

Question ❓ How many Watt Urban mech has on that Leenex 60 engine?

10 Upvotes

Yeah the stat only say 60 so like how much Watt? Is it like 60 ish Megawatt or something? I don't know, does anyone know how much Wattage it has?


r/battletech • • 10h ago

Fan Creations Experiment #3; Absolute silliness.

Post image
11 Upvotes

I don't have an image of a mech to go along with this, as I just built it as a thought experiment. I have run it through Mech Factory's combat simulator. Sadly, it has some severe limits in that it never uses the axe nor does it count in the Guardian suite. However, even with those limitations it did very well against several powerful mechs, including a MAD-3R (Marauder) and an AS7-Dr (Atlas).

But yeah, absolutely totally ridiculous!

Anyone else ever make something silly that actually worked?


r/battletech • • 11h ago

Lore Mechs with articulated heads speculation. (Art from official core rulebook)

Post image
239 Upvotes

Is it ever explained how mechs with articulated heads are controlled? I was curious while looking at this art from the back of the official core book. To me it seems reasonable to assume that a pilot looking around while wearing a neurohelmet can control the direction of the head, while torso twisting and leg movement are done similarly to mechs with fixed cockpits.


r/battletech • • 11h ago

Question ❓ Light Fusion Engines in vehicles

6 Upvotes

Hello-

I have my unit set in the Jihad era and am curious as to what the current rules are for Light Fusion Engines in vehicles. I have a bunch of Manticores and Rommel/Patton tanks I want to upgrade without the cost of an XL.

Thanks!


r/battletech • • 14h ago

Tabletop My poor son and the difficulty of killing a mech

Post image
190 Upvotes

My catapult didn’t fare well against my son’s star. But I’ve gotta laugh because this mech was pissing him off good. Ended the game with maybe a ton of armor left. Even though he was trying his hardest, he couldn’t get a solid kill. He had two LBX on his side of the board even, and this was his luck with critting the catapult. He finally de-legged the poor mech. This picture was taken right before the moment of disaster when the other leg came off. Shooting a guy while he’s prone. What an outrage. LOL


r/battletech • • 15h ago

Miniatures Quickly Painting Eridani Light Horses

10 Upvotes

Hey folks. Looking to start an Eridani Light Horse force and I’m considering how I can paint them quickly and relatively easily. I’m thinking maybe a ColourForge Death Rattle Green prime with a wash, but I’d like to hear opinions from others who have done or considered ELH.


r/battletech • • 16h ago

Miniatures Last mech and full lance done!

Thumbnail
gallery
142 Upvotes

r/battletech • • 16h ago

Miniatures Blue and Red Paint Schemes

Post image
52 Upvotes

Hey guys! Im looking for inspiration/examples of minis that have been painted in Blue and Red. Somewhat similar to the image below.

Would love to see what y'all have painted!


r/battletech • • 17h ago

Question ❓ What 2-4 lances should I get just for Aces co-op?

12 Upvotes

I picked up up Aces Scouring Sands to play through the campaign in co-op with a friend. I have the Alpha Strike box set as well, but I'm thinking of getting between two and four more lances or packs to make sure we each have options when it comes to building our forces for the campaign. What would you recommend?

I'd like packs with mechs that provide a variety of options. I don't care too much about chasing memes, competitive play, or lore coherence.

Anything y'all would recommend that I track down? Again, this is just for a playthrough of Aces.

Thanks!


r/battletech • • 18h ago

Miniatures A Blakist Wolverine WVR-9W

Thumbnail
gallery
245 Upvotes

r/battletech • • 18h ago

Question ❓ Can’t export from Megameklab

2 Upvotes

Pretty much what the title says. I’ve been trying to put together a couple of custom mechs and ended up downloading the lab last night, but I’ve run into the issue where it seems like every way to export the files is busted for me. If I try to export a mech directly it just stays stuck at 0%, same issue trying happens to export a lance or export from a saved MUL file, and when I try to print directly to PDF I get given a java error saying that a handle is invalid. I’ve tried reinstalling a few times now, going through the whole process of wiping java and everything but nothing’s worked so far. Has anyone else had this issue and found a solution for it?


r/battletech • • 19h ago

Video Games [Hobby] MegaMek Empires - A BattleTech-based, Player versus Player versus AI, 4X Strategy Game Mode Campaign Support Tool (Not A Game - A Strategic Map Level Tool) ***REQUIRING CODING HELP PLEASE*** Example images available within.

Thumbnail reddit.com
0 Upvotes

r/battletech • • 21h ago

Miniatures House Kurita Ranger Lance spare part?

Thumbnail
gallery
38 Upvotes

Is this a lid for the rocket launcher? Or a new kind of weapon? Because of diameter it seems belongs there. Need help.

For those dont know: Minobu Tetsuhara is in the box with his panther!!!


r/battletech • • 21h ago

Fan Creations King of the Periphery

Thumbnail
gallery
140 Upvotes

Even the forgotten worlds refused to lie down and accept Clan rule.

Here’s my first real project of this scale! I’m like 99% sure this is acceptable on this sub, there’s other posts like it. And I’m not sharing files or anything.

And of course I got compensatory minis from battletech. Which totally wasn’t just me making an excuse to buy more plastic….

Anyways. For my first real project like this it came out well. Took me years to finish. (Because I only recently got adhd meds. Not because it actually took that much work lmao)

As for why there’s even a King Crab in the periphery?…. Uh… Brian Cache. Or blame Comstar. Your choice.


r/battletech • • 22h ago

Question ❓ So watched a Tex Talk vid at Lunch

40 Upvotes

Was on the Thor/Summoner, naturally poked fun at Malthus... and after getting back to work my mind started to wander into insanity to block out the Christmas Music that's been playing since the clock turned over to November. X(

And I'm sure y'all have been seeing those AI 'trailers' for Movies if they where cast in previous decades (like X-men or Star Wars in the 60's) popping up in your feeds.

Anyways.... now my brain is picturing Ricardo Montauban as Nicolai Malthus, or at least hearing the "Attention Sommerset" monologue spoken like Khan in Star Trek 2.

Have I lost it or does does my insanity have something here?


r/battletech • • 23h ago

Meme What the loss of LexaTech Irece does to a LAM pilot

Post image
181 Upvotes