r/diycnc • u/CompetitivePizza4394 • 20h ago
PureCutCNC v0.6.0
r/diycnc • u/benhobby • Apr 10 '22
This is your home for learning, sharing, and admiring the process of building a CNC machine from the ground up. Please answer the questions you know, ask the ones you don't, and show us your builds!
Some of the best DIY CNC content out there resides on the depths of youtube. Here are some fantastic builds for your viewing pleasure and reference. This is by no means a complete list. If you know of a good one missing from this list, message me!
Building a wireless CNC pendant — looking for feedback
I'm working on a DIY wireless CNC pendant using an ESP32-S3 with a 5-inch touchscreen, a rotary encoder, and physical buttons for jogging and machine controls.
I'm considering switching from nRF24L01 to Bluetooth BLE to simplify the hardware and free up some GPIO pins.
Still working on the enclosure design and button layout.
Has anyone built something similar? I'd be interested to hear your experience, especially with Bluetooth reliability and jogging controls.
Hi everyone! I'm starting a build log series documenting the full design and fabrication of my DIY MDF CNC router.
Part 1: How I structured the CAD to survive design changes When designing a custom machine from scratch, specs always evolve—whether due to material availability, profile dimensions, or workshop constraints. Editing dozens of individual parts manually almost always leads to forgotten dimensions and assembly errors. To avoid this, I used a top-down parametric approach in SolidWorks:
Another key rule was designing for my actual workshop capabilities—making sure every component could be realistically fabricated using standard woodworking tools alongside a lathe and mill-drill.
Happy to answer any questions about top-down CAD modeling or the structural layout. (Note: if anyone wants to inspect the CAD geometry, and the full manufacturing package is linked in my profile).
r/diycnc • u/MetalMachinistMario • 2d ago
r/diycnc • u/research4workbiz • 2d ago
Hi I’m 24M from India and I run a small business of Paints. Now, I want to learn CNC from scratch. I don’t have a huge budget so can I try out with starter sets to understand basics of CNC
I have no background in engineering and coding I would also appreciate advice on that if it’s necessary.
Shall I try these options
Besides what are the things should I keep in mind
And what do I need to learn. Any kind of advice or discussion is appreciated.
r/diycnc • u/research4workbiz • 2d ago
Hi I’m 24M from India and I run a small business of Paints. Now, I want to learn CNC from scratch. I don’t have a huge budget so can I try out with starter sets to understand basics of CNC
I have no background in engineering and coding I would also appreciate advice on that if it’s necessary.
Shall I try these options
Besides what are the things should I keep in mind
And what do I need to learn. Any kind of advice or discussion is appreciated.
r/diycnc • u/Key_Appointment_3262 • 3d ago
I've been working on a DIY CNC 5 axis mill for some time, maybe over 8 years sadly. It will likely only be used for 3+2 machining most of the time. I've been making great progress in the last few months. Added a few pictures to show the progress.
Travels are 360 x 330 x 330 mm, with a 2 axis rotary table on the Y-axis. Pneumatic counterbalance on the z-axis. Controller is UC300 with UCCNC for now, may change that in the future but right now I just want to start using it.
r/diycnc • u/Planetary-Engineer • 4d ago
A follow-up to a post in the r/CNC sub, on a wireless 4th-axis controller.
The original post showed the communication side of the project: sending position commands from the CNC control to a standalone indexer over Wi-Fi.
This video shows the next step, getting the controller to drive the stepper motor through commanded positions and showing the results alongside the CNC position display.
Original wireless 4th-axis proof of concept post
Still a work in progress, but the basic communication and motor positioning are coming together. The next part is refining the system and putting it through more testing.
r/diycnc • u/Capital_Maize_3706 • 6d ago
Soy estudiante de ingeniería mecánica y me gusta un poco la electrónica, estoy trabajando en una cortadora cnc la cual desde pandemia no funcionaba, acudi a revisarla tenia quemado el arduino, drivers mal calibrados y decidí cambiar todo, modulo cnc y algunos cableados, la maquina actualmente funciona hace diseños pero se esta deteniendo a ratos, creo que puede ser ruido eléctrico, ya separé cableado AC y mejoro, pero aun se detiene, como podría solucionar esto?
Es una maquina muy básica con 4 servos y con arduino
r/diycnc • u/Suspicious_Cut_9709 • 7d ago
r/diycnc • u/RoutPath • 8d ago
r/diycnc • u/carolynprescott • 9d ago
For a DIY router that runs the same plywood blanks, the layout I’d try is two stops along the long edge and one at the end. I’d reference the stops to the permanent base and leave relief in the replaceable spoilboard so it can come out without disturbing them.
The part I’m less sure about is keeping those base-mounted stops clear of the surfacing pass. How have you laid out your stops so a new spoilboard can go in without having to re-find XY?
r/diycnc • u/Initial-Weekend-8059 • 9d ago
Hello there, i'm planning a small CNC to machine aluminium. Work area 300mmX; 200mmY; 100mmZ.
I've been thinking about the best structural design. I don't need speed but i want precision and good surface finish.
I thought about building with aluminium extrusions, but they seem somewhat expensive.
Steel tubing, on the other hand, is cheaper, and i saw online availability up to 150mmx150mm square section. With that size i would only need one for the bed and one for the column in a column mill design.
On the other hand, there's a lot of leverage in this design. The fixed gantry seems more rigid by default.
I have two CAD models attached, as preliminary models.
What are the pros and cons of each design? is there a superior configuration?
r/diycnc • u/EssamSukkar • 10d ago
Hello everyone, I hope you are all doing well. I am reaching out to this great community hoping someone might be able to help me with an urgent issue.
I operate a Biesse Rover A-S 1332 (2011) CNC machine running on Windows XP SP3, with XP600 control and HB660 configuration.
Recently, the PC’s hard drive failed, and unfortunately, I do not have the original recovery disc. There is no official Biesse dealer in my country, and the quotes for remote support are far beyond what I can afford right now.
The good news is that I managed to recover all the machine's configuration files and program folders (including BiesseWorks, WRT, and InTime) from the old drive.
However, I am completely stuck at InTime. Since I only have the copied program files and drivers—and not the actual installation setup file (.exe)—I am unable to inject and register its real-time services into the fresh Windows XP SP3 system.
Would anyone here happen to have the InTime installation setup compatible with Windows XP SP3 / XP600 (or a compatible recovery image for a 2011 Rover A-S) that they could kindly share with me?
Any help, files, or guidance to get past this hurdle would truly be a lifesaver. Thank you so much in advance for your time and support!
r/diycnc • u/mars2087 • 11d ago
r/diycnc • u/buttwater0 • 13d ago
Hey all, can anyone identify this smallish cnc machine? Can't tell if that's a spindle motor, but the shade suggests it might be a laser. Up for sale with little info on FB. Thanks!
r/diycnc • u/ExMachinaEngineering • 13d ago
An 840 mm bass-guitar neck won't fit Steve's CNC. The solution? Design a new machine together, from Greece to the UK.
In the first episode of this CNC series, we begin designing a gantry mill from first principles, with the goal of machining wood and aluminium—and eventually trying steel. We start with the spindle assembly, using Steve's existing high-speed spindle as a motor to drive a separate spindle cartridge.
r/diycnc • u/ShoppingComplete3845 • 15d ago
r/diycnc • u/spoonguy123 • 15d ago
I'm considering adding CNC functionality to one of my small manual mills.
I'd like to be able to make decent finish and resolution molds in high density graphite, for use in the glassblowing industry.
I'm not planning on setting up a big business or anything, I'd just like to be able to make stuff for myself and sell to my small group of friends and artists.
A work area of 5"x5"x3" would be more than enough. Smaller would even be acceptable.
Should I retrofit something like this on a manual mill, or buy a cheap premade unit like the ones from vevor, for a few hundred bucks?
There is a (possibly)large caveat. Graphite dust is the devil. I would likely need to make an enclosure, cut my material submerged in a tub of water, include constant misting on the cut surface, and have a wet/dry vac running the entire time with a shroud for the spindle.
Even with all that I'll probably go home with a sinus full of graphite dust.
Any thoughts or opinions would be very welcome and id be grateful for your input!
Cheers!