r/eGPU • • 8h ago

Thoughts on this dock? Saw this Black Friday deal, wanted to hear others opinions before I pull the trigger

Post image
27 Upvotes

Seems like a pretty good deal, plus it’s TB5 so it has room for upgrading if I ever get a device that has TB5/USB5.
My current setup is a laptop with USB4, so this should work with it. I’m planning on getting a 9070XT to pair with it, outputting to 1440p.
Has anyone used this dock or others from Minisforum? I haven’t personally so I’m curious about others experiences.
Thanks for reading!


r/eGPU • • 4h ago

new to eGPU, why is PCIe 4.0x4 enough, instead of 16 ?

2 Upvotes

Curious about eGPU, I have a very large 7800xt (32 cm) which I don't use much and I love small cases, so I thought of buying a minsforum DEG1 with a oculink card in the PC (ASUS B850 mATX mobo) . DEG1 is PCIe 4.0 x4, and I image the 7800xt would suffer from that, but people here are satisfied with DEG1 and more powerful cards than the 7800xt. Why shoudl I not buy a PCIe 4.0 x16? Are the extra lanes not used anyway?

thanks.


r/eGPU • • 5h ago

Faulty EGPU or Other Issue? (ROG XG MOGILE 2025 5070TI EDITION)

2 Upvotes

So I have a question, I actually bought an EGPU from the official Asus website in India and when it arrived it actually worked the thing lighted up but when I connected it to my ROG Xbox Ally X the light disappeared and also the device couldn't be found on the Armoury Crate and it just had fan noises very loud fan noises, so I need help in determining that was this faulty from the start or is there a fix to this? (Note: My Xbox Ally X can still be charged from the Egpu but the Asus service center has deemed it to be NO POWER)


r/eGPU • • 12h ago

Advise on Egpu purchase and setup for my legion go 2 (extreme)

4 Upvotes

Long story short i'm selling my ps5 pro and getting an egpu setup on the tv with my legion.
Been looking at the AOOSTAR AG03 for the base and a rtf 5070 for the card.
Any suggestions on other docks or cards around same performance that would work better OR if i should wait for a potential price crash or new gen card release or advise on setup would be appreciated.

Cheers.


r/eGPU • • 8h ago

AORUS RTX 5060 Ti AI BOX + MINISFORUM AI X1-255: USB4/PD quirks and downstream display performance

1 Upvotes

I spent some time testing the AORUS RTX 5060 Ti AI BOX with a MINISFORUM AI X1-255 over USB4, so I wanted to share a few findings that may help others.

Overall: I’m very happy with the AI BOX. It’s surprisingly quiet, stable under sustained load, and the coil whine on my unit is extremely faint.

AI X1 one-cable PD + USB4 issue

If I connect the AORUS directly to the AI X1 using only the host USB-C cable:

AORUS → USB-C → AI X1

the AI X1 powers on, but the AORUS does not enumerate at all — no GPU and no AORUS USB hub.

Restarting or shutting down and powering back on does not fix it.

Interestingly, the AI X1 also drops to roughly a 34W CPU power profile, compared with around 42W when using a normal 100W USB-C charger.

I previously saw almost exactly the same behavior with an ONEXGPU 2, so I suspect this is more of an AI X1 PD/USB4 initialization quirk than an AORUS-specific issue.

Separating power and USB4 fixes it

This works perfectly:

100W USB-C → AI X1
AI X1 second USB4 port → AORUS

Cold boot works, the GPU and AORUS USB devices enumerate normally, and the AI X1 stays at its usual ~42W USB-C power profile.

I also tested a single-brick setup using a SlimQ F330:

SlimQ DC → AORUS
SlimQ USB-C 100W → AI X1

with the AI X1 connected separately to the AORUS over USB4.

This setup has been completely stable through repeated Steel Nomad, Solar Bay Extreme and Time Spy runs, with no USB4 disconnects, driver crashes or unexpected shutdowns.

Interesting finding: downstream USB-C display performance

The biggest performance difference I found was actually the display path.

With a portable USB-C monitor connected through the AORUS downstream USB-C port:

Steel Nomad: 3,225 / 32.26 FPS

Without changing anything else, I disconnected the USB-C monitor and connected my desktop monitor directly to the AORUS GPU output:

Steel Nomad: 3,562 / 35.62 FPS

That’s roughly a 10% difference, without even rebooting.

So there appears to be a measurable performance penalty when the eGPU is also driving a display through its downstream USB-C connection.

Overall, the AI BOX has been excellent. The one-cable PD setup doesn’t play nicely with my AI X1, but separating host power from the USB4 connection completely solves it.


r/eGPU • • 1d ago

MOREFINE G2S External GPU Docking Station 24G / 16G GDDR7 5090M. Has anyone gotten it?

Post image
10 Upvotes

I acquired the 24 GB version and am still waiting for it to be delivered. The 24GB version is now out of stock on the webpage and there is a 16GB version instead. I wanted to check if anyone has gotten one of this that could comment on it. I have not seen any reviews anywhere.


r/eGPU • • 20h ago

eGPU for Lenovo Legion Go S, SteamOS version

3 Upvotes

Morning! I’m trying to help a friend get a living room set up for the Legion Go S, running SteamOS.

I’ve never tried an eGPU set up and need some advice on what hardware is needed.

I got my friend a 9070xt GPU and an option he’s considering is connecting it to his Legion Go S to play on the TV.

From what I’ve read, it supports USB 4 connections.

So, what hardware do we need to hook up the GPU to his Legion Go S? Do we need an additional power supply and if so, what kind?

Thanks for any information and help.


r/eGPU • • 1d ago

Title: Can I upgrade the GPU on my Lenovo IdeaPad 330-15IKB

2 Upvotes

I have a Lenovo IdeaPad 330-15IKB with an i5-8250U, 8GB RAM and motherboard FRU 5B20R19919.

Original GPU: AMD Radeon 530 2GB

Current storage: 2TB SATA HDD + 240GB WD Green SATA SSD (installed in DVD-drive caddy).

Lenovo Parts Lookup lists M.2 2242 PCIe 3.0 x2 SSDs as compatible with this laptop family, but I haven't confirmed whether my specific motherboard has an available M.2 PCIe slot.

I want to connect an external GPU, preferably an RTX 2060 or RTX 3060, using an M.2-to-PCIe adapter such as ADT-Link R43SG.

Can anyone confirm whether this motherboard has an available M.2 NVMe slot that supports an eGPU? I'd prefer not to remove the Wi-Fi card.

Has anyone tried this setup?


r/eGPU • • 1d ago

Need help figuring out RTX 4060 upgrade for a mini PC

Thumbnail reddit.com
1 Upvotes

r/eGPU • • 2d ago

Trying to learn game dev video editing and LLMs on a 2012 MacBook Pro (4GB RAM / HDD) realistic eGPU & speed tips?

3 Upvotes

Hey everyone

I’m 18 soon l will be 19 living in Rwanda and learning electronics repair My dream is to combine my hardware repair skills with game design video editing and learning how LLMs work, so I’m trying to teach myself on the only laptop I could get a 2012 MacBook Pro with 4GB of RAM and an old HDD

Right now it’s way too slow to run the software I need to practice I’ve been reading about eGPUs and wondering if hunting down an older eGPU setup is actually realistic with Thunderbolt 1 or if the bottleneck makes it pointless. Since I know my way around opening up electronics, I'm also wondering if it's true SSD and RAM can make run faster

For those of you who started out on really slow machines, what tricks or upgrades actually helped you get your work done? Appreciate any advice!


r/eGPU • • 2d ago

Numbers count or not...?

Post image
3 Upvotes

RX 9070 XT with AOOSTAR AG03 and OneXPlayer 3 through Thunderbolt 4 connection and Apple active cable.

Not bad, not bad!


r/eGPU • • 2d ago

Handheld users, will we struggle with GTA 6 due to the bottleneck?

8 Upvotes

I have a XAX with 5070 and AG03 which run most games perfectly except for Battlefield 6 due to the insane CPU bottleneck.

Will GTA 6 be the same due to it's insane open world and CPU demand?

Any estimations or theories welcome!


r/eGPU • • 2d ago

NFHK N-P114-A on a desktop M.2 slot with a separate ATX PSU: auto power-on, or Add2PSU + 24-pin splitter?

2 Upvotes

Hi all. I'm putting together a multi-GPU Linux workstation for local AI models and would like a check on how the dock gets switched on before I plug anything in. Not built yet; parts are on order. One-page sheet with the wiring diagram attached.

**Tower:** ASUS ProArt B850-Creator WiFi Neo, Ryzen 7 9700X, 96 GB, two RX 7900 XTX, Corsair RM1200e.

**Dock:** NFHK N-P114-A with an RX 7800 XT, on its own separate 850 W ATX supply (24-pin to the dock board, 2 x 8-pin to the card).

**OCuLink path:** M.2 host cable (30 cm) in a CPU M.2 slot to a rear bracket port, then a separate 0.5 m SFF-8611 to SFF-8611 cable to the dock.

**Questions**

  1. Auto power-on without a sync board. Posts on egpu.io say the N-P114-A starts and stops its ATX supply with the host when its switch is OFF and the OCuLink cable is fully pinned (A1/A21/B1/B21). Is that right, and is ON just "forced on"?
  2. Does that survive my cable path (M.2 host cable to a bracket port, then a second cable)? Which host cables and 0.5 m cables are known to be fully pinned?
  3. Fallback: I also have an Add2PSU-type sync board (Molex from the main PSU, 24-pin from the second PSU). It and the dock board both need the 850 W's only 24-pin cable. Is a 1-to-2 Y splitter (18AWG, 30 cm) a safe way to feed both, with the board switch OFF?
  4. Any power-on, power-off or sleep and wake problems with the eGPU on a different supply than the host, especially on Linux?

Thanks for any pointers.


r/eGPU • • 3d ago

Oculink Sucks. I fixed it.

Post image
134 Upvotes

Just a little sneak peak. Perfect signal integrity and zero PCIe errors with up to 6ft of cable.

At 1ft it is capable of Gen5 x4.


r/eGPU • • 3d ago

Just picked up an rtx 3070 for 200usd

Post image
64 Upvotes

I don’t have a pc. I want to set up an EGpu setup with my existing gaming laptop. Is this viable?


r/eGPU • • 3d ago

My setup with Thinkpad P15 G2 and RTX 3070 ti and an external G274K monitor.

Thumbnail
gallery
11 Upvotes

Hello everyone,

I had been looking into eGPUs for the past few weeks, especially since I was planning to live in a dorm for college, I thought that buying a whole desktop case would be pointless and an eGPU would also save me money.

here's the specs:

Intel i9 11950H (8 core/16 threads)

48GB DDR4 (I added 16)

1 + 2 TB NVMe SSD (I added 2)

Integrated Intel UHD Graphics

NVIDIA RTX A2000 (iGPU)

MSI NVIDIA RTX 3070 ti (eGPU)

Although my Thinkpad P15 G2 already comes with an RTX A2000 (4GB ECC VRAM), and a 1920p x 1080p resolution with 60hz, which is decent for a laptop. I wanted something a little better, which I could game on when I'm at home, and so I bought the following (prices with shipping and taxes, in USD):

RTX 3070 ti - eBay ~$300

ADT-link K43SG (NVMe M.2 to PCIe 4.0x16 adapter) - eBay ~$90

Corsair CX450M (450W Power Supply) - eBay ~$15

Z-EDGE G274K (4K monitor, 160hz, 1ms, IPS) - eBay ~$200

The monitor particularly was a great purchase IMO, it really improves the experience and quality while also improving the frame rate when using an eGPU.

You also don't need to buy all of these items from ebay, the NVMe to PCIe 16 adapater and the monitor were new, and I was just looking for everything on eBay for cheaper prices, although it would have costed the same if I bought them elsewhere. In fact, I recommend getting your stuff elsewhere if it's not used or refurbished because eBay can be unreliable with shipping and returns.

My thinkpad has 3 NVMe M.2 SSD slots, 2 on the back panel and 1 under the keyboard. It does support Thunderbolt 4 as well but I didn't want to compromise on any performance while having these slots available. Also, a direct NVMe to PCIe 16 adapter is obviously much cheaper than OCuLink.

The particular challenge with my Thinkpad was that the only PCIe 4.0x4 slot is the one under the keyboard, while the ones on the back panel are PCIe 3.0x4, which don't provide drastically different theoretical bandwidth from the TB4; so I decided that if I was gonna get an NVMe to PCIe 16 adapter, I might as well use the PCIe 4.0 slot under the keyboard.

I didn't have any issues setting it up, for the most part. In particular, I had one problem, Windows was able to connect and detect the eGPU after putting in the adapter in the slot, turning on the Power Supply and rebooting it. However, it would not appear in Task Manager, and when I checked Device Manager, it would say "Windows has stopped this device because it has reported problems (43)". I was able to fix it with this: https://egpu.io/forums/expresscard-mpcie-m-2-adapters/script-nvidia-error43-fixer/ . The laptop also reports error 2100 about some "corrupted disk" whenever you boot, but you can just press escape and skip right past it.

Finally, for performance, I am able to play RDR2 on 4k and Ultra/High settings on 50-80 FPS (mostly around 60) on DLSS Quality settings, whereas before it was around 30 FPS on Medium settings with balanced DLSS on the native 1920x1080p display.

I'm very satisfied with the results and the setup, being able to use the Laptop at school/elsewhere and attaching the cable back and playing games on good quality with a big monitor when I'm home. I know the setup looks like attaching and detaching would be too much work to do everytime, and it's definitely more than just disconnecting a USB cable, but I think it's worth it. The PCIe ribbon is quite bendable/adjustable, I can keep the keyboard almost on the original laptop format (still disconnected, of course) while having the ribbon cable connected. Not that it matters anyways because I can just adjust the laptop to whatever position, since I'm using an external monitor.

I just need a little screwdriver, and it's helpful to have one of those electronics metal pry tools as well. I take the screw off on the back panel first, then losen up 2 screws on the back which allows me to take off the keyboard. Then I use the metal spudger to pull keyboard back towards the screen and take it out. Finally, I need to take off the metal panel under the keyboard to access the PCIe 4.0 (and ram) slot. It's also important to keep in mind that the metal panel under the keyboard has screws that come out all the way, so it's nice to have a little plastic zipper to keep them safe (same with the m.2 nvme screw but you screw it right back in after putting in the adapter). You also need to be a little more careful when installing or taking off the metal panel since if you drop the screws inside the laptop you might have to open it entirely to find them. In total, this takes me 2-4 minutes, and I don't really have to use my laptop a lot for highschool, so I say it's worth it.

I haven't tried the compatibility on Linux yet, will make another post if I see any major issues.

(I know the pic says 32gb but that's before I installed the additional memory)


r/eGPU • • 2d ago

Budget, compact eGPU for photo editing?

2 Upvotes

Hi! I'm looking for an eGPU with OCuLink (or maybe USB4) for my GMKtec K8 Plus for use with DxO Photolab editing software.

12 or 16GB of VRAM would be useful I think. I don't like big videocards in an eGPU estand with a separate PSU, I'm looking for a budget, compact option. Can pople give me any advice?

If budget wasn't an issue I'd go for the Morefine G2, but as a EU citizen it'd probably cost me 1300 euro's.


r/eGPU • • 3d ago

eGPU Manager: plug-and-play eGPU for SteamOS handhelds (free Decky plugin + desktop app)

Thumbnail
gallery
38 Upvotes

Using an eGPU on a SteamOS handheld always meant fiddling: Game Mode stays on the iGPU, shaders re-process every time you switch, the handheld screen stays lit black, and pulling the cable can freeze the driver until a reboot.

So I built eGPU Manager, a free, open-source Decky plugin + Desktop app:

- Auto switch: plug the eGPU in → Game Mode restarts on it, on your TV/monitor. Unplug → back on the handheld. (Or turn auto off and use a Switch button.)
- Shaders per GPU: each GPU keeps its own shader cache, so switching doesn't trigger "Processing Vulkan shaders" again. A Shaders page shows every game's size per GPU, and you can delete per GPU.
- Handheld screen turns off while you play on the eGPU.
- Disconnect safely button: releases the card first, so unplugging never freezes amdgpu.
- Smooth Desktop Mode: KDE renders on the eGPU too (no frames copied over USB4).
- Status + Check setup: dock chip, USB4 speed, PCIe link, monitor, and fixes it can apply (like approving the dock).
- One-click install, one-click uninstall. Everything lives in your home folder, so it survives SteamOS updates and never touches the system partition. Uninstall restores stock.

Tested on: Legion Go S (Z1 Extreme) · SteamOS 3.9.5 · RX 9060 XT · AOOSTAR AG02 (USB4 40 Gb/s).
That's the only setup I've tested so far. If you try it on other hardware (Steam Deck, ROG Ally, other docks or cards), there's an "It works: share my hardware" button in the plugin. It pre-fills a GitHub report (no serials) so I can add your setup to the compatibility list. "Report a problem" does the same, with a log.

AMD cards only (NVIDIA isn't supported on SteamOS).

GitHub + download: https://github.com/avishai0258/steamos-egpu-manager

Feedback welcome! If it helps you, you can buy me a coffee: https://www.buymeacoffee.com/Avishai0258


r/eGPU • • 3d ago

Best RTX 30 or 40 series GPU for an eGPU dock over USB4 40Gbps on a ThinkPad P16v Gen 1 with a 1200p display?

0 Upvotes

Laptop Specs:

Name: ThinkPad P16v Gen 1
Brand: Lenovo
CPU: AMD Ryzen 7 PRO 7840HS (8C/16T 3.8-5.1Ghz)
GPU: AMD Radeon 780M iGPU
Storage: 1TB M.2 2280 PCIe 4.0 SSD
RAM: DDR5 32GB (16x2) 5600 MHz
Display: 16" 16:10 WUXGA 1920x1200 IPS, 100% sRGB
Available eGPU ports: 2x USB4 40GBps (supports data transfer, Power Delivery 3.0 and DisplayPort 1.4)

What GPU would you recommend? Preferrably looking for something from the RTX 30 or 40 series so I can enjoy games with PhysX and Gameworks enabled.


r/eGPU • • 3d ago

I got a RX 570 and it wont display on pop os or recovery systems. Please help

2 Upvotes

I dont know if i have treid alot of stuff butt the fans spin, it has no dual bios.... Anything helps. I think its a powercolor red dragon. Treid all ports on another monitor, no output. Literally anything helps, ill answer any questions you have.


r/eGPU • • 4d ago

Oculink eGPU seems to be unstable compared to USB4

Post image
46 Upvotes

So I'm having this issue where I have this minisforum DEG2 eGPU dock with a 5070 Ti and using it with a Owltree M2 to Oculink adapter on my laptop's spare SSD slot and for some reason I've been getting random video tdr Bsod. I tried setting power management plan to max performance and setting Pcie speed to to 3.0 via registry editor since my bios is locked and even tried increasing the video tdr delay but all of them don't work. Even tired contacting Nvidia and still didn't help. There is this one detail where if I turn off my desk light, the eGPU would result in a. Video tdr. And this dose not happen on a USB4/Thunderbolt connection so I'm wondering if it's the adapter since the minisforum dock has a redriver built in so I'm wondering if the adapter ribbon isn't shielded. If anyone knows what's going on let me know.


r/eGPU • • 4d ago

Looking for TH3P4G3 ATX Accessories (US)

Post image
3 Upvotes

Good day everyone! I recently bought an TH3P4G3 (ATX) from the market place, but it did not come with the original metal brackets, psu pad, and the screws. Does anyone know where I can source replacements for these?


r/eGPU • • 4d ago

Mini pc egpu

1 Upvotes

Tengo una dudas, mi mini pc tiene un solo puerto m.2 mvne donde está instalado mi winds un ssd me.2 2280 pero donde va ese puerto pienso instalar una GPU externa por medio de un adaptador, entonces desconecto el m. 2 SSD 2280 donde esta mi Windows para instalar la gráfica, y ese SSD q quite lo pasaría a una carcasa de 40gbps y lo conectaria por medio de USB 4 y cambiará el arranque desde la BIOS para q arranque mi Windows por medio de uds 4 donde esta el SSD m.2 2280 con la carcasa de 40gbs, habría algún problema o incoveniente, funcionaría ?


r/eGPU • • 4d ago

Blackmagic eGPU on Linux: nine days of testing, one hardware wall (full write-up)

3 Upvotes

Setup: Blackmagic eGPU (Radeon Pro 580, subsystem BDBD:A14C) on a 2019 iMac (iMac19,1) running Kubuntu, Thunderbolt 3. The same machine has an internal Radeon Pro 570X — same Polaris family — which gave us a working twin to diff against, register by register.

What works: the card enumerates, the unassigned-BAR problem is solvable (three different ways documented), and once the SMC firmware is started from the virgin state, the SDMA and RLC firmware loads cleanly.

The wall: the graphics-core (CP) firmware load never completes. The card's SMU orders a hardware transfer (command byte 0x40) that never happens on a card that arrives cold over the Thunderbolt tunnel, and the driver dies with "SMU load firmware failed," probe -22.

What we ruled out before concluding that, over nine days: both the Linux and genuine Apple SMC firmware builds (extracted from macOS and run byte-clean — they stall identically), Apple's own driver sequence (a 1:1 port of the Linux one), ~1,160 registers diffed between the cold card and the working twin in virgin and post-attempt states, EFI-stage placement via a custom UEFI shim, Apple's EFI drivers (carved out of the iMac firmware — they're display-only, the card gets no EFI init), userspace AtomBIOS POST, and a one-byte SMC firmware patch (rejected by the card's keyed firmware signature — the firmware is cryptographically locked against modification).

Worth noting: this card reportedly works via VFIO passthrough on a normal PC (Framework community guide) — the iMac case is specifically poisoned by the boot chain resetting the card at OS handover. If you've fought this card on other hardware, the data may still save you time.

Full record, all tools, all failures: https://github.com/razer1989-tech/cold-card