I spent some time testing the AORUS RTX 5060 Ti AI BOX with a MINISFORUM AI X1-255 over USB4, so I wanted to share a few findings that may help others.
Overall: I’m very happy with the AI BOX. It’s surprisingly quiet, stable under sustained load, and the coil whine on my unit is extremely faint.
AI X1 one-cable PD + USB4 issue
If I connect the AORUS directly to the AI X1 using only the host USB-C cable:
AORUS → USB-C → AI X1
the AI X1 powers on, but the AORUS does not enumerate at all — no GPU and no AORUS USB hub.
Restarting or shutting down and powering back on does not fix it.
Interestingly, the AI X1 also drops to roughly a 34W CPU power profile, compared with around 42W when using a normal 100W USB-C charger.
I previously saw almost exactly the same behavior with an ONEXGPU 2, so I suspect this is more of an AI X1 PD/USB4 initialization quirk than an AORUS-specific issue.
Separating power and USB4 fixes it
This works perfectly:
100W USB-C → AI X1
AI X1 second USB4 port → AORUS
Cold boot works, the GPU and AORUS USB devices enumerate normally, and the AI X1 stays at its usual ~42W USB-C power profile.
I also tested a single-brick setup using a SlimQ F330:
SlimQ DC → AORUS
SlimQ USB-C 100W → AI X1
with the AI X1 connected separately to the AORUS over USB4.
This setup has been completely stable through repeated Steel Nomad, Solar Bay Extreme and Time Spy runs, with no USB4 disconnects, driver crashes or unexpected shutdowns.
Interesting finding: downstream USB-C display performance
The biggest performance difference I found was actually the display path.
With a portable USB-C monitor connected through the AORUS downstream USB-C port:
Steel Nomad: 3,225 / 32.26 FPS
Without changing anything else, I disconnected the USB-C monitor and connected my desktop monitor directly to the AORUS GPU output:
Steel Nomad: 3,562 / 35.62 FPS
That’s roughly a 10% difference, without even rebooting.
So there appears to be a measurable performance penalty when the eGPU is also driving a display through its downstream USB-C connection.
Overall, the AI BOX has been excellent. The one-cable PD setup doesn’t play nicely with my AI X1, but separating host power from the USB4 connection completely solves it.