r/freebsd • • 1d ago Bravo

news FreeBSD 15.2-BETA3 Now Available

Thumbnail lists.freebsd.org
43 Upvotes

r/freebsd • • 4d ago

news FreeBSD Foundation Laptop Project Update – 2026, third quarter

Thumbnail freebsdfoundation.github.io
24 Upvotes

r/freebsd • • 3h ago

discussion Steam Big Picture on bare-metal FreeBSD 16 with Intel Xe and Gamescope

16 Upvotes

I got Steam Big Picture running on a Dell Inspiron 3530 booted directly into FreeBSD 16.0-CURRENT. The screenshot is from the live Gamescope session on the laptop’s internal 1080p panel at 120 Hz. Gamescope is using Vulkan on the Intel Iris Xe (Raptor Lake-U), and the Linux Steam client runs through Linuxulator with Xwayland.

The broader project is a Linux 7.4-based LinuxKPI and DRM port for FreeBSD. I started from Linux 7.4-rc2, including DRM core, TTM, DMA-BUF, and Xe. The 7.4 test kernel now attaches Xe on the physical laptop and starts the Gamescope display test. The Steam screenshot is from the earlier working kernel build.


r/freebsd • • 1h ago

AI WordCraft in Firefox with fjord

Thumbnail
gallery
8 Upvotes

FreeBSD 15.1-RELEASE-p6 userland, 16.0-CURRENT host.

The first two screenshots show WordCraft v0.18.1 viewing files that were exported to .docx by PdfCraft v0.21.1 for FreeBSD.

The same version of PdfCraft is in the App Store in fjord.


r/freebsd • • 5h ago

help needed Instability in sshfs

Post image
3 Upvotes

I'm having problems with sshfs, and I don't know if there's an inherent instability in the tool, or in my system, or if it's to do with my very slow internet connection — or if I'm just using it badly. Can anyone help?

fusefs-sshfs-3.7.6, FreeBSD 15.1-RELEASE-p7, on a 2013 MacBook Pro with a USB wifi dongle made out of snails.

I mount a remote file system, it works. I list the contents of the mount point, it's good. I list a sub-directory, that's good too. But as I drill down, eventually I get "No such file or directory" and at that point it's all gone! The same thing happens if I just leave it alone for more than a couple of seconds, and it's the same whether I use ls or an Xorg file manager. If I go back to the mount point then I can see the contents again, rinse and repeat. If I open a file then it will probably load, but it'll drop after a couple of seconds.

Using rclone to mount my Dropbox works perfectly, at least I haven't encountered any issues.

Here's an example of my mount command:

sshfs -oIdentityFile=[LOCAL_PATH_TO_PRIVATE_KEY] [REMOTE_USER]@[REMOTE_IPV4]:/ [LOCAL_PATH_TO_MOUNT_POINT] -oServerAliveInterval=15

I've tried a few different values of ServerAliveInterval — 15 as above, also 1, something else I think, but I don't remember any of that making any difference.

Er... so I guess I'm doing something stupid and obvious, and I'd be really grateful for any advice!

Thaks so much,

Ben


r/freebsd • • 4h ago

AI FreeBSD: How Do You Tackle CVE Security Patch Cadence? – Klara Systems

Thumbnail
klarasystems.com
2 Upvotes

… FreeBSD is in the process of modernizing how vulnerability data is published, so systems can consume it as easily as humans. …


r/freebsd • • 1d ago

fluff My awesome ultimate FreeBSD Unix workstation

Post image
95 Upvotes

r/freebsd • • 2d ago Bravo

fluff My concept of the FreeBSD installer

Thumbnail
gallery
422 Upvotes

Hi everyone, I'd like to share my concept for the FreeBSD operating system.

This is not a finished product, but a design of what the system installer could look like. Just an idea.

Naturally, many will find sone flaws in it, since installing FreeBSD is unlike any other systems, with its own nuances and complexities.

When creating it, i had to slightly refresh the main logo with color and shapes. I made it sharper. And what i see, i really like.

I hope someone likes it.
I’d be interested to read your opinion on this.

Have a nice day.


r/freebsd • • 1d ago

news Roblox recently made playable on FreeBSD (GhostBSD) 14-x and above with easy installation

Post image
51 Upvotes

Runs on rosemary, a compatibility layer for macOS apps on linux and now on FreeBSD & GhostBSD. https://github.com/nunreasonable/ginrose-flatpak (ignore the flatpak at the repo name that's old and i didn't bother to change it)


r/freebsd • • 2d ago

fluff Just got FreeBSD 😁

Post image
107 Upvotes

I got steam working, also yes it's SwayFX.


r/freebsd • • 1d ago

discussion Package 'Latest' release timing

16 Upvotes

How long does it take for a new package to be available in the 'Latest' ABI?

eg php83 updated 19/11 to version 8.3.37, Latest has 8.3.36_2 (23/10)

https://www.freshports.org/lang/php83/

Nginx updated 19/11 to 1.30.7 Latest has 1.30.6_18 (12/11 - 5 releases behind)

https://www.freshports.org/www/nginx/

both these contain patches for high severity CVE's. Is there a way to install package sooner?


r/freebsd • • 1d ago

fluff 9BSD

Post image
22 Upvotes

r/freebsd • • 1d ago

article E-Card: Scaling Online Gaming and Betting with FreeBSD – FreeBSD Foundation

Thumbnail freebsdfoundation.org
9 Upvotes

… E-Card has encountered and reported several bugs and worked on custom patches for FreeBSD and ZFS to meet its specific needs. It is an active member of the FreeBSD community and has expressed interest in writing articles and sharing its technical experiences and insights. The company’s involvement helps enhance the FreeBSD ecosystem and supports other businesses interested in utilizing FreeBSD technology.
 
E-Card’s successful utilization of FreeBSD demonstrates the operating system’s ability to handle demanding, large-scale online gaming and betting applications. FreeBSD’s stability, performance, and community support make it an excellent choice for businesses operating in the online gaming industry. …

https://www.linkedin.com/posts/e-card-freebsd-ugcPost-7528721191037984769-tPdt/

Responses to https://mastodon.social/@FreeBSDFoundation/117650245017504428 include an extremely rare public glimpse into my early childhood.


r/freebsd • • 1d ago

discussion Sylve hijacked my pf.conf

13 Upvotes

If you carefully handcrafted your pf before installing Sylve you should check.

The ironic (and frankly rude) thing is that it not only did it without warning, but it had the gall to say "Do not edit this file." !! after it completely overwrote my own.

I ended up ditching it and doing a rollback.


r/freebsd • • 1d ago

AI Which of my hosts need the nginx security update? Asking SamDrucker – Dan Langille's Other Diary

Thumbnail dan.langille.org
3 Upvotes

Today brought a security update for nginx: nginx-1.30.7,3. That raises two questions every time: which of my hosts run nginx, and which of them need the update? I have a lot of hosts. Until today, answering meant logging into each one, or a loop of ssh host pkg info nginx. Now I have a better way. …

― u/dlangille


r/freebsd • • 2d ago

video FreeBSD Xe port update: Linux 7.4-based LinuxKPI, Vulkan, and Sway on real Iris Xe hardware

13 Upvotes

I’ve been working on an experimental Intel Xe port for FreeBSD. The LinuxKPI compatibility work targets Linux 7.4, and the Xe driver and shared Intel display code come from Linux 7.4-rc2. The port currently uses an older FreeBSD DRM core with targeted backports for the interfaces the newer Xe driver needs.

The test setup is FreeBSD 16.0-CURRENT running in a KVM guest on a Dell Inspiron 15 3530, with the laptop’s Raptor Lake-U Iris Xe (8086:a7a1) passed through via VFIO.

What works

  • Xe attaches to the physical GPU, loads DMC firmware, and exposes DRM card and render nodes.
  • Mesa Vulkan renders on the GPU. An offscreen triangle test read back all 65,536 pixels and every pixel matched the expected result.
  • Sway runs on Xe with wlroots’ Vulkan renderer and submits 1920×1080 output to the laptop’s eDP-1 panel. Two independent Wayland windows ran for 20 seconds. I captured both the tiled layout and one window floating in the center after moving and resizing it.

The Linux 7.4 work has involved more than getting Xe to compile. The running driver exposed differences in GEM/GPUVM initialization, atomic KMS properties, and vblank handling. One crash came from the guest kernel and modules using different layouts for a LinuxKPI file structure. Rebuilding against matching headers fixed the mismatch, and a new regression check now exercises sync-file FD export, import, and close. Another crash came from the vblank path trying to take a mutex that can sleep while inside a FreeBSD critical section. I adapted that path to follow the existing FreeBSD i915 port.

What’s still open

Sway passed the dual-window test, but logged eight EBUSY page-flip failures and two direct scan-out buffer import failures. The captured frames confirm that hardware composition worked. Reliable scan-out still needs more testing.

So far this is one laptop tested through GPU passthrough. If you’ve hit similar page-flip or framebuffer modifier issues on FreeBSD DRM, I’d be interested in comparing notes.


r/freebsd • • 2d ago

fluff I have joined the team 😁

Post image
82 Upvotes

r/freebsd • • 2d ago

video Recordings of the GNUstep online meeting of 2026-11-14 are online

Thumbnail
youtube.com
7 Upvotes

r/freebsd • • 1d ago

discussion Gentoo or FreeBSD for long-term usage and security

Thumbnail reddit.com
2 Upvotes

r/freebsd • • 1d ago

discussion But why

0 Upvotes

I’m sure this has been asked and answered many times but as a Mac/lenovo/linux user that has been refurbishing old machines, what should be attractive to me about BSD?

Not a programmer, just do home networking stuff, and setting up machines for a high school classroom. What are the benefits for experimenting with BSD and loading it onto my machines?


r/freebsd • • 2d ago

AI FreeBSD's init Stands Alone – Vivian Voss

Thumbnail
vivianvoss.net
7 Upvotes

r/freebsd • • 2d ago

help needed pkg upgrade is ignoring my local Poudriere repository

10 Upvotes

Due to the new wave of security patches, I chose to set up my own Poudriere server, so I can compile packages faster than FreeBSD's package repository.

For example, the latest www/nginx version available from FreeBSD's repo is "1.30.6_18,3", while the latest port version is "1.30.7_1,3". The 1.30.7 is the version which fixes the HTTP/2 vulnerability. So, currently the "nginx" distributed by FreeBSD is vulnerable. Same applies for MariaDB, Postgress, PHP and other packages.

My Poudriere already has this new version compiled, however "pkg upgrade" doesn't seem to get it:

  1. Running "doas pkg upgrade" it doesn't show any update ("Your packages are up to date.").
  2. Defining "CONSERVATIVE_UPGRADE=false;" has no effect.
  3. Defining a higher priority to my server (my own poudriere repo) has no effect.
  4. Running "pkg update -f" and such has no effect.

However if I set `enable: false` on `usr/local/etc/pkg/repos/FreeBSD.conf`, then magically, the `pkg upgrade` shows the nginx upgrade from my Poudriere server. In other words, it only works when ONLY my server is available.

The current solution is bad, because I need to toggle on/off between FreeBSD repo and my repo.

What is the proper fix here?


r/freebsd • • 2d ago

answered [bhyve] Why doesn't my keyboard work?

5 Upvotes

I recently started playing around with FreeBSD 15.1 on an old server. I had the bright idea to use bhyve to create a virtual 9front server. I was well aware that this has already been done, so I had some idea of how to configure it.

I am not using vm-bhyve, though that certainly would make things easier. I am using a config file that I wrote by hand, based on the above wiki article, and in the format specified by bhyve_config(5).

That aside, after some issues with my config, and a botched attempt at passing through one of the onboard NICs (I ended up creating another bridge and tap device and giving the VM the tap), I was able to get the VM (and in turn the UEFI firmware) running. I connected to the VM with my VNC viewer (TigerVNC's viewer on a laptop running NetBSD 11.0), and saw the bhyve UEFI splash, as well as some errors about it not being able to find a couple boot devices (not surprising, since they are empty). It then started attempting to network boot.

I recalled from playing around with PXE on another UEFI-based system that ESC should abort the boot. I tried it, and nothing happened. I then tried CTRL+C (thinking it would do something interesting). Nothing. After some more faffing around, I temporarily commented out the virtual NICs to skip the network boot stuff. This time it prompted me to press a key to call up the boot menu, and I did, yet it did not respond.

It is possible I am doing something wrong here, but I don't see why the system, at this point, would reject keyboard input. I tried searching around, but didn't come up with much other than some mentions of input problems in guest OSes (which would be irrelevant for now, since my problem is occurring in the firmware), and this forum post where someone complained about the same problem (the UEFI not responding to input).

Is what I'm trying to do (access the UEFI boot manager) simply not possible under bhyve?


r/freebsd • • 3d ago

answered Is it just me or is www.freebsd.org down?

Post image
33 Upvotes

I can't get through, and downforeveryoneorjustme says they can't through either!

Did I miss a maintenance memo or something? I was trying to install this evening but it can't get through to update packages.