r/materials • • 2h ago

Need help with my major project

1 Upvotes

I'm a final year mechanical student and my project leans towards materials, I need to analyse and compare tpms based peek and pla+composite for medical applications, I was explicitly told to get close elastic modulus values to that of the cortical bone.

We already have peek structures fabricated for different porosities (20,40,60 and 80) gyroid, primitive and diamond.

So we need to fabricate another material for these porosities and tpms

Perform compression testing on all the above specimens and compare the elastic modulus for the result and conclusion

I don't know where to start !

My prof doesn't tell me much and i would appreciate any advice and guidance

Please and thank you.


r/materials • • 19h ago

Nano pillars

Post image
3 Upvotes

4k Animated video at https://youtu.be/q4ViRee8n74


r/materials • • 1d ago

Need help with my major project

2 Upvotes

I'm a final year mechanical student and my project leans towards materials, I need to analyse and compare tpms based peek and pla+composite for medical applications, I was explicitly told to get close elastic modulus values to that of the cortical bone.

I don't know where to start !

My prof doesn't tell me much and i would appreciate any advice and guidance

Please and thank you.


r/materials • • 1d ago

can human sweat dissolved through rubber

0 Upvotes

I have a ps5 pro controller and early on when I got it I started to dissolve through the rubber grip i sweat a lot normally but i've never dissolved through anything before and it's literally melting on the edges i don't know if this is a normal thing or not it started happening like a month after I got to controller and I got it when it first came out it's only where the tips of my fingers normally are and the holes are getting bigger and the rest of it has turned yellow and started to warp and bubble i don't know if the controller's material was somehow defective or if this is something that can happen can someone please explain If you can even explain what is going on or if there's a better subreddit for me to go to and it's not like I lock myself in a room and game for 3 days straight i gamed for a couple hours go to sleep go to school go outside when I can please I am confused edit: i'm going to repost this on my account with pictures


r/materials • • 1d ago

I built a tool to help my dad search research faster. Would it help materials researchers?

3 Upvotes

My dad is a chemistry professor, and I started building Citation Atlas to help him spend less time searching for research.

It lets you explore citing and related papers. What I’m trying to improve is the time spent finding something relevant enough to actually sit down and read.

I’m curious how useful that is in materials research, where a literature search can take you across chemistry, physics, and engineering.

Here’s the site: https://mycitationatlas.com

I’m the developer—if you’re interested in free access, just DM me.


r/materials • • 2d ago

MatSci PhD + MechE BSc/MSc struggling to close industry roles after a 30-month post-grad gap. How do I break through?

30 Upvotes

Looking for honest feedback from materials engineers, lab managers, and R&D hiring managers on what I’m missing in my search.

Background:

  • Education: PhD in Materials Science (graduated May 2024), MSc and BSc in Mechanical Engineering.
  • Technical Experience: My PhD functioned essentially as applied R&D consulting for industrial manufacturers. I designed and built custom experimental rigs to simulate service conditions, developed sample prep and validation protocols, and ran advanced materials characterization (microscopy, spectroscopy, etc.). Prior to that, my MechE background covered aerospace manufacturing, medical device hardware development, and electrochemical energy storage research.
  • Post-Grad Timeline: Upon graduating, I turned down an academic postdoc to stay near family and pursue industry R&D directly. It has now been 30 months without landing a full-time role. During this window, I spent 6 months doing unpaid R&D/technical work for an early-stage startup that never got off the ground, and have been applying steadily since.

Where I’m Stuck:

I’ve been applying broadly across R&D Engineer, Materials Engineer, Failure Analysis, and public-sector/regulatory engineering roles. I feel stuck in the classic PhD trap where I am viewed as overqualified for entry-level BS/MS roles, yet lacking the 3–5 years of commercial industry experience required for mid-level positions.

My resume does get traction on the hands-on testing side; I’ve had 4 or 5 processes go all the way to the 3rd or 4th round (mostly physical testing/characterization and R&D engineering roles) but they’ve all ended in rejection or ghosting.

Questions for those in materials/R&D hiring:

  • How do you convince a hiring manager you won't get bored or jump ship from an entry/mid-level hands-on role when you have a PhD and two MechE degrees?
  • How do I talk about a 30-month post-PhD gap (including 6 months at an unfunded startup) in final-round interviews so I don't come across as rusty or "too academic"?
  • What specific job titles or sectors am I likely overlooking that value hands-on characterization and test engineering? At this point, should I focus on contract/temp-to-hire lab roles, public sector engineering, or adjacent tracks (like quality, process, or field application engineering) just to get recent commercial experience on paper?

Any blunt advice on how hiring teams view candidates in my spot would be appreciated.

EDIT: Graduated in Montana, then moved to New Mexico looking for opportunities before relocating to California, where I’m currently staying with family to keep overhead low while job hunting. That has definitely narrowed the local R&D and materials/manufacturing pool compared to some other regions, though I’ve been open to both local roles and relocating for the right fit.


r/materials • • 2d ago

Where do I get transparent aluminum samples?

Thumbnail reddit.com
0 Upvotes

r/materials • • 2d ago

What to do if I realize research isn't for me?

7 Upvotes

Hello fellow matsci people.

I am a Canadian student in my third year (out of 5 years) studying materials and nanoscience. it combines chemistry, physics and materials science. Unfortunately unlike most materials science programs, mine is a science degree, NOT an engineering degree.

Majority of people in my program plan to attend graduate school doing at least a masters. Some are definitely able to land jobs before graduating but it isn't nearly as common as grad school. I don't mind doing more school after undergrad, its that my ADHD (diagnosed) is so severe that I don't think I have it in me to complete a thesis (whether it be masters or PhD). My reading comprehension is very poor to where i struggle to get past the abstract of a research paper.

Since Im already in my third year, I feel like Im in some sunk cost fallacy with my degree. I already checked and I know that if I switch majors I will have to restart back to first year which I really don't want to do. I have so much anxiety about my future and I've just been spiralling every single day going on reddit, googling, searching for alternative career plans and pivots I could make without restarting undergrad entirely. I don't have the confidence in myself to be able to land a job with just a science bachelors even if I know other people with my degree have done it before so I feel the need to think of all these backup plans. Its all I worry about.

Since I can't do a thesis masters and I don't want to switch, one thing I thought of was potentially doing a non-thesis masters in something thats slightly adjacent to my degree thats more industry applicable. For example, Ive heard of physics bachelors grads doing a masters in: data science, applied mathematics, statistics or finances. Are these viable pathways coming from a materials background? Has anyone else with a similar BSc made a pivot like this into industry? Any advice or insight would be really appreciated. Thanks and have a great day.


r/materials • • 2d ago

What area of material science should I go into? How did you decide what to focus on

4 Upvotes

I’ve just started studying materials engineering. I chose this major because I’m curious of how the world works and what everything is made of. I’ve always been good at maths, physics and I’ve always had an interest for chemistry. I’m interested in the IT designing, testing aspects that this major entails. Materials engineering is a rather broad subject and it depends on what fits me the most what specialisation I will later take and work in. How did you find out what area you would like to work in and interests you most? I’ve joined one uni association so far which is just about materials science which is still rather broad. I’ve also been thinking about ones to do with biomaterials, polymers, usage of materials in medicine, atomic reactors, astrophysics and so on. I’ve missed the mark on most when it comes to meetings for newcomers but I could always contact them to see if they’re still recruiting and what they could tell me about what they focus on. My goal is to try as much as possible to find out what sticks but I’m scared that it’ll just overstimulate me, I won’t have time for it all or it’s too late and I’ll have to wait until next year when they’re recruiting again. On the upside at that point I may know more or less what I’d like to do but on the other hand I’ll feel bad with myself that I’m behind and that I didn’t join sooner


r/materials • • 3d ago

Cryo treatment

3 Upvotes

doing cryo treatment on 6061-T6 for my senior project (plain T6, not T651 so the quench stresses are still in there). most papers i found soak 6-8h at -150/-190 then uphill quench into boiling water or steam

problem is my uni can only get down to around dry ice temp and they wont give me a 6h slot either. so my plan is 3x2h cycles with uphill quench into boiling water after each one

is dry ice to boiling water enough ΔT to actually get some yielding and a residual stress drop worth reporting? or is it pointless compared to LN2. also would you change the soak time or cycle count, and how fast does the transfer need to be. planning to keep it at 100C max so i dont overage it

if anyone knows papers on Al alloys uphill quenched from dry ice instead of LN2 id really appreciate it


r/materials • • 3d ago

Scientists Discover a Hidden Magnetic Effect That Produces Signals 100 Times Stronger

Thumbnail scitechdaily.com
16 Upvotes

r/materials • • 4d ago

What do you write down before comparing two materials-screening workflows?

0 Upvotes

We’re the MatterSeek team at Yuyao Technology. When comparing materials-screening workflows, we suggest writing down four things in advance: the target property and test conditions, hard constraints, reference evidence, and the first follow-up check.

The last part is where we’d like to hear other approaches. Before screening candidates, do you define a specific result that would rule a candidate out? For example, if a candidate meets your target property in a calculation but falls outside the processing window you can actually test, do you drop it or keep it for a separate round?

We’d be interested in examples from either computational or experimental work. A general or non-confidential example is plenty.


r/materials • • 4d ago

What's the most unexpected cause of premature wear you've come across?

2 Upvotes

I've been thinking about how often wear problems get blamed on the material first.

But sometimes the material isn't really the problem. Poor alignment, unexpected loads, lubrication issues, or even small changes in operating conditions can make a big difference.

I'm curious about the cases that weren't obvious at first.

Have you ever dealt with a part wearing out much sooner than expected, only to find out the real cause was something completely different?

What was it?


r/materials • • 4d ago

Question about electrodeposited p-SnS absorber layers: how much do deposition potential and substrate matter for PV efficiency?

Thumbnail reddit.com
2 Upvotes

r/materials • • 5d ago

Two-dimensional material membranes with precisely tunable interlayer spacing from nanometre to submillimetre | Nature Materials

Thumbnail
nature.com
17 Upvotes

r/materials • • 5d ago

How do you check the fit of a ceramic plunger and sleeve after measuring both parts?

1 Upvotes

I work with precision ceramic parts. After measuring the plunger OD and sleeve ID and checking roundness, we do a simple bench check to see whether the plunger moves slowly and smoothly through the sleeve. For those of you who work with close-fitting parts, how do you check the fit before installation?


r/materials • • 6d ago

Could chip-scale electron accelerators enable new microscopy applications?

9 Upvotes

I recently read about dielectric laser accelerators (DLA) and had this thought of whether they could eventually enable new types of electron microscopy or materials characterization.

I am not trained in material sciences so I wonder: are there applications where this would offer a meaningful advantage over existing instruments? What capabilities would make it genuinely useful?

Appreciate your thoughts on this. Thank you.


r/materials • • 6d ago

What’s the difference between a property and an attribute

Post image
15 Upvotes

r/materials • • 7d ago

I don’t know where to post this, hoping somebody might point me in the right direction

Post image
2 Upvotes

is there any material that I can cover or soak this in so the plastic doesn’t fluoresce? i’d like these to not glow under a black light but sunscreen didn’t work and I’d like to avoid paint. it’s LEGO ABS plastic and I’ve had trouble finding any answers


r/materials • • 7d ago

[article] Ru 1 − x Cox)2FeSi Heusler alloys: Bridging spintronic, energy harvesting and high-strength structural applications

1 Upvotes

r/materials • • 8d ago

[ARTICLE] Photovoltaic performance improvement of organic solar cell with ZnO nanorod arrays as electron transport layer using carbon quantum dots-incorporated photoactive layer

2 Upvotes

r/materials • • 8d ago

Pure Al and Cu Metallography

Thumbnail reddit.com
2 Upvotes

r/materials • • 8d ago

How did you actually learn metallography? Looking for advice on how to develop a better understanding of microstructures.

15 Upvotes

I am currently learning metallography, but I find it difficult to organize and connect all the concepts. I often get confused between phases, microstructural constituents, and the various structures found in different alloy systems.

For instance, when studying carbon steels, stainless steels, aluminum alloys, or copper alloys, I struggle to build a coherent framework that helps me understand what I am actually looking at. There are so many different phases, constituents, transformations, and microstructures that I sometimes find it hard to classify and distinguish them.

However, I believe my main challenge goes beyond just memorizing the names of the phases.

I want to understand how the microstructure relates to mechanical properties. Why does a specific microstructure result in a particular mechanical behavior? How do phases, grain size, morphology, distribution, and heat treatments influence strength, hardness, ductility, toughness, etc.?

Sometimes I feel like I am just looking at micrographs without really knowing why. I can observe a microstructure, identify certain features, or describe what I see, but I don’t always know what conclusions to draw from those observations or what I am supposed to learn from them.

I would like to move beyond simply recognizing microstructures and develop the ability to interpret them from a metallurgical perspective.

I also have access to an inverted-stage optical microscope, which gives me the opportunity to practice and examine actual metallographic samples. I would like to make better use of this opportunity.

My questions are:

How did you learn metallography? What approach or learning method worked best for you?

How do you organize your knowledge regarding phases, microstructural constituents, and different alloy systems?

How did you learn to relate microstructures to mechanical properties and material behavior?

How do you practice? Did you use textbooks, microstructure atlases, reference samples, or did you systematically examine specimens under the microscope? If you were to start over, what would you do differently?

I’m not necessarily looking for a list of textbooks. I’m particularly interested in your learning process—how you developed the ability to interpret microstructures and how you moved from merely observing them to truly understanding their significance.

I would greatly appreciate hearing about your experiences and any advice you might have.