r/modular • • 13h ago

Performance Dystopian Dance Squad

44 Upvotes

Guess which modules are being used…


r/modular • • 4h ago

Update to a happy system :)

Post image
25 Upvotes

r/modular • • 22h ago

Performance _builders

25 Upvotes

practice practice . learning the hermod+ sequencer


r/modular • • 18h ago

Performance Jolyfish

7 Upvotes

Modular synth remix of my song Jolyfish.
Original song: https://youtu.be/8c5J4L13W3o


r/modular • • 6h ago

Bitbox MkII custom firmware 2.3.4+c11 is out!

5 Upvotes

Bugfix release + Fog reverb!

- Fog reverb on FX3. Tap the selected FX2 cell again to switch to FX3, press INFO, and turn Type past Chamber to Fog. Try a short Room on FX2 and a long Fog tail on FX3, with a separate send for each.

- Smoother Codec delay. Short fades soften the sharp crackle at the edges of dropouts while keeping the broken-up sound of the Loss control.

- Smoother GEN retriggers. If a fast pattern clicks on a Sample pad, raise Pos → Loop Fade. This smooths the incoming attack and the outgoing filtered sound. Leave it at 0% for the original transients.

- FX3 send fix. With FX3 selected, touch and encoder edits in the FX overview now change the pad’s FX3 send and leave its FX2 send alone.


r/modular • • 3h ago

Discussion Bitbox Micro's unofficial 2.3.14-mod - External FX: Sends and return, dub throws, and older modules now supported

Post image
4 Upvotes

Here's another update to the unofficial, community-driven firmware patch for the Bitbox Micro that puts more of the module on MIDI, gates and CV.

Two releases in 24 hours: 2.3.13-mod fixed installing on older modules, and 2.3.14-mod adds External FX. It's also a bit of a milestone: the tenth release since August, and the first that reaches beyond the module.

This build opens up the option to turn every pad's delay and reverb sends into Aux sends and a return, to make use of your own external effects and add them to the mix, with or without the Micro's own internal effects in series or in parallel. Of course, this allows you to now send a classic dub throw to your delay, reverb or external FX, from a gate or your controller. Bringing it all together, your external effects come back into the module's mix, where the Character chain's Airwindows effects can process them too.

This opens up so many possibilities. Here's some ideas:

• Put the reverb on Aux into Sealegs, Swells, Clouds, Plexiphon, or whatever's in your rack.

• Set the delay to Both, so the Micro's delay blends with your own: a tape echo, Multigrain, Desmodus Versio or anything else in your rack.

• Sequence a Dub Throw on the snare on the last beat of each bar, into your own echo device.

• Send pads out to a distortion or a filter, like 100Grit, and let the Micro's reverb tail the processed sound.

Everything that's new:

• Send the delay and reverb to the Micro's own effects, out to your gear on any output from 3 to 8, or both at once. Bring your effects back on In 1/2, into the mix or into the Micro's own delay or reverb.

• Throw a pad into the delay, the reverb or both with Dub Throw, by gate or by pressing a button on your controller using CC 103 or 106.

• Cut the low end from the sends with Aux HP and from the return with Return HP, and set the return's level with Return Lvl or CC 63.

• An effect sent out on Aux switches off the delay or reverb, which frees CPU for the Character chain.

• Fix: The delay and reverb sends (CC 84 and 85), and Sustain on Clip and Slicer pads (CC 87), now reach 100% at 127. They stopped just short before.

Thanks to Mndscrpt for the request.

Older modules now supported

If your module said "Unable to verify" when you flashed 2.3.10-mod or later, it will now install. A couple of users helped uncover something that anyone writing firmware mods for any hardware should know: the same device can ship with different bootloaders, each with its own limits.

Every Bitbox Micro comes with a bootloader, the software 1010music installs at the factory to flash firmware from the card. There are at least two versions of it: older ones only take firmware up to 768 KB, whereas newer ones take up to about 1.6 MB. Recent releases had grown past 768 KB, so older modules couldn't install them.

Big ups to nikoleterrible for reporting it, and to stoermelder for running the diagnostics and testing the fix. Since 2.3.13-mod, the firmware is packed to fit and unpacks itself each time the module starts. It's confirmed to work on modules from 2020 to 2026, across both known bootloaders.

This isn't from 1010music. Use it at your own risk, although it can't brick your module. Bring your own stock firmware, and please don't pass the patched firmware around.

Full guide and installer: https://modularpatcher.github.io/bitbox-micro-fw-patch


r/modular • • 19h ago

Just curated this focal rig on mod. Grid, and am about pull modules to rack it, but before i do that, any feedback? My focus is to work a lot w/ drum farm and veno orbit.

Post image
3 Upvotes

I like to make smaller focal cases that are module centric to really learn a more complex module when i decide to get it, and this rack is based on the veno orbit and drum farm. Want to really master those.. for modules to make cool loops with orbit i have Tabor and axis to create good cv as well as Neoni/ TS-l for melodic parts/cv to drive tabor wild. Have three filter modules and 3 oscillator modules, good reverb/delay with veno echo and versio for more experimental fx to loop with. Then drum farm can have a good compressor/limiter with sump pump and plenty of triggers via Krono/Cara/axis as well as triggers from the looper. Also plenty of cv, but cv is not as important for drum farm.. oh and also Zadar for plenty of envelope/ super wild lfo signals if a channels is put in repeat with as wild gate.. anyway let me j ow that tall think especially people who have orbit or farm and let me know what you think about my assisting modules.


r/modular • • 20h ago

Performance Modular / semi-modular jam with the Loquelic Iteritas / Nebulae / Bastl Citadel

Thumbnail
youtu.be
3 Upvotes

I’ve been playing this setup for a while now and it does feel like I’ve landed on what might be the final set up. Not had the feeling of ‘something’s missing, I should probably get this module and it will solve all my problems’ yet!

GEAR:
1010music Blackbox
1010music Bluebox
Behringer Crave
TipTop Audio uZeus
Doepfer A-130-2v Dual VCA
Doepfer Wasp Filter
Noise Engineering Loquelic Iteritas
Behringer System 100 Sequencer
Takaab 3AT
Bastl Citadel Wave Bard
Qu-bit Nebulae V2


r/modular • • 2h ago

If you were just starting, what would you start with?

2 Upvotes

Hi. I come from a background of hardware synths, samplers, DAWs and VST'S. My question if you were brand new to modular and only wanted to start with $500-$1000 what would you start with? I have a dreadbox erebus but no euro case or anything else. Thanks.


r/modular • • 4h ago

Performance My first techno track

Thumbnail
youtube.com
2 Upvotes

My first techno track with this case! I'm really not an expert on techno, but this was fun to make.

PATCH NOTES
Ohmforce Bohm kick
Manis Iteritas bass
Plaits for the plucky stuff
Peaks for the 808 Snare
Bohm Groove for the clicks and filtered noise

Sequenced by the ORN8 by TLM Audio (two Turing machines, one euclidean sequencer, one TB-3PO bass sequencer)

Monsoon Delay from Parasites firmware
Zadar for some modulation
Befaco Divkid Mutes
Lapsus Os for faders
Some compression from Disting mk4
Side chaining from Bohm Performer
Mixing with Befaco STMix and Mutable Veils clone


r/modular • • 1h ago

Performance A MODULAR AMBIENT MACHINE with Moffenzeef Tehom

Thumbnail
youtu.be
1 Upvotes

r/modular • • 11h ago

Dumb? “Easy” module idea: passive detune

1 Upvotes

So they say don’t use a passive mult for pitch right cause it will lose a bit of accuracy but what if you had a passive mult that also had I wanna say resistance (I don’t strict do diy or electronics) various degrees on the outs so that everything you put in would come out slightly more de-tuned to maybe get that thick sound if you were to mix them all together?


r/modular • • 17h ago

Discussion Need advice: Paring down in-case controllers for more filters

1 Upvotes

I have simply too much in-case eurorack controllers (simple fades, lfos) right now, and not enough filters to go with my insane array of voices (which often also double as lfos/modulators).

I run a ton of stereo voice patches and prefer stereo-capable filters. I use all pass, lp, hp, BP, and notch in my DAW stuff, and typically run about 10 different filter inserts in a single composition.

I'm running these filters:

  • Vostok Atlas
  • Mutable Blades Clone
  • Winterbloom Neptune
  • Arcacio Stigma (preordered)

I also have some LPGs and hybrid modules

  • Smear
  • Endorphin.es Ghost (admittedly, this has become mostly a filter for me anyways)
  • Natural gate (preprdered)
  • SSF steady state gate stereo field

Any favorites out there? Atlas and Blades gives me my bread and butter most of the time, so I'm looking for the unusual here. The only one that I'm 80% sure on is the Joranalgue Filter 8. Anyone own the Bastl Ikarie or Noise Engineering Ampla Versio?

Current MG: https://modulargrid.net/e/racks/view/3250868

[Edit[ formatting