r/synthdiy • u/SouthSignalLab • 16h ago
modular A little update from my workbench. I've been working on two Eurorack modules, and the latest prototypes are now up and running.
SPRD is a 4 HP buffered multiple with four inputs and twelve outputs. The inputs are normalized, so it can be anything from four independent 1-to-3 multiples to a single 1-to-12. Each channel uses an OPA2197, mainly to keep things accurate when distributing pitch CV. The circuit works as intended, but I need to make a few changes to improve solderability. With all the tiny SMD parts, this one has unfortunately moved pretty far away from being a practical DIY project.
DSTRT is a 4 HP analog distortion module, loosely inspired by a well known pedal effect from the 70s. Pretty straightforward circuitry: op-amp gain stage, diode clipping, a simple low-pass filter, and output level control. The latest SMD prototype worked on the first try, although there's still an annoying pop at power-on to fix. I'll also release a 100% THT version for DIY builders.
Both SMD modules are just around 21 mm deep without the power cable. The THT version of DSTRT is around 45 mm deep.
Still some testing and a few fixes ahead. That's what prototypes are for, I guess.
