If your MOZA setup isn’t working correctly in Forza Horizon 6, here’s a quick guide that should help resolve the most common issues:
1. Game Installation
It can be installed via official channels such as Steam. If you have performed a custom installation, you will need to specify the directory for Forza Horizon 6 in the Pit House game list.
2.Force Feedback Settings
All the MOZA Racing Wheelbases support Force Feedback.
3. Telemetry Configuration
After entering the game, click ‘Settings’.
After entering the settings, click on ‘HUD & Gameplay’, turn to the bottom.
Set ‘Data Out’ to ‘On’
Set the ‘Data Out IP Address’ to ‘127.0.0.1’.
Set the ‘Data Out IP Port’ to ‘20066’.
Once you have completed the above steps, you will be able to obtain telemetry data via the steering wheel speed indicator and the instrument panel.
4. Device Control Mapping
You will need to configure the control mapping when you launch the game for the first time.
To enter the game, first click on 【Settings】to enter the Settings page.
After entering the Settings page, click on 【Controls】, and Select 【Change Input Mapping】
Note: Buttons displaying a yellow exclamation mark in the game interface UI must be bound; control presets will only be maintained once binding is complete.
▼ Why is there no force feedback in Forza Horizon 6? Other games work fine.
If there is no force feedback when using the MOZA Base in “Forza Horizon 6”, you can troubleshoot in the following way:
1.Firstly, keep the steering wheelbase connected to the computer
Please disconnect the handbrake, shifter, pedals, third-party steering wheel and other peripherals first, leaving the MOZA base for the first binding.
2.Set the preferred device in Windows
Open the Windows Game Controller Settings, set MOZA Base as the preferred device, and then re-enter the game to bind the steering wheel.
3.Confirm that the MOZA Base in the game is “Device 1”
The Horizon series typically outputs force feedback to “Device 1”, and it is necessary to confirm the binding in the game control.
4.After completing the Base binding, connect the other devices one by one.
The suggested sequence is: first, binding the base → confirm the force feedback → then connect the handbrake/shifter and other accessories → rebind one by one.
You can also check the full official setup guide here:
So after getting my second moza KS pro with same rattling issue , I used the tape method and it no longer rattles. Anyway I wanted to have different dashboards and lights on the wheel with easy changing with a push of a button and with Claude/azom I can now cycle through different dashboards and led colors live while I race Pretty nice
My new laptop (an ASUS TUF Gaming A15 FA507NV running Windows 11 Pro) isn't recognizing my MOZA R5 Pro, whereas my old laptop recognizes it just fine. I've attached a video showing the difference between my older laptop and the new ASUS laptop. In the video, the first laptop shown is the old one. It only has a very weak integrated graphics card and can't be used for gaming, so using that isn't an option. The second laptop is the ASUS TUF.
On my older laptop:
Windows recognizes the MOZA R5 Pro wheelbase, steering wheel and pedals, everything works properly.
The MOZA Windows Driver appears in Device Manager under Human Interface Devices.
The MOZA R5 Pro Base appears in Windows Game Controllers with status OK.
On my new ASUS TUF A15 FA507NV:
MOZA Pit House doesn't recognize the wheelbase, steering wheel or pedals. Everything appears as disconnected (sometimes it recognise it as connected, but even if i turn the wheel it stays at 0 degree).
The MOZA Windows Driver is missing from Device Manager.
Instead, a USB Input Device appears under Human Interface Devices with a yellow exclamation mark.
In the device properties, Windows reports:
This device cannot start. (Code 10) – STATUS_DEVICE_DATA_ERROR
At the first connection attempt i also got the error 43, but i couldnt reproduce it since then.
I've already tried quite a few things:
Completely reinstalled Windows (clean installation). I even tried to install Windows 10 instead 11, but no success.
Completely reinstalled MOZA Pit House Offline Installer v1.3.5.36 and i also tried the older legacy version MOZA Pit House Legacy Version v1.2.2.6.
The Offline Firmware Rollback Tool didn't work. The green base button appears, but if click on it, i get the "hardware doesn’t match error".
Updated all available drivers, including chipset, BIOS and USB drivers.
Tried all available Moza firmware.
Disabled USB power saving / USB throttling.
Set the laptop to Performance mode.
Tested both available USB 3.2 ports on the laptop.
The other USB devices, such as my mouse and headset, are recognized correctly by both ports.
Disconnected every other USB device, leaving only the MOZA connected.
Trying to start Moza base in boot mode and recalibrate it after force firmware erase.
I’ve run out of ideas now – the only thing I can think of is a powered USB hub. Do you think that would solve the problem?
The old laptop is useless for gaming, and i dont want to buy a new laptop or PC.
My moza srp2 throttle isn’t being registered on my computer. I have the srp2 pedals setup properly where the brake is plugged into the port in the bottom of the throttle and the throttle is also plugged into the correct port. When I pressed the brake pedal it read perfectly but if I press the throttle I get no reading at all.
My R9 v2 died a couple of days ago, out of warranty decided to open it up.
Was dead, nothing at all when turned on, and pc didnt saw it. Tested the power supply and it was good. Noticed when i pressed power that led would turn on.
Decided to risk it by buying a board from support and let me tell you, that was fast and easy.
They would reply early in the morning of the next day, every time, with clear and easy instructions. After a few messages and photos they asked for to make sure they send the right board.
Took 16 days from chine to portugal, arrived very well packaged and fixed my problem right away. you can see where the old one burned.
People usually only report negative feedback, wanted to leave this here. May help someone fix their out of warranty base.
I bought the R5 Pro bundle three weeks ago for $283 USD, and I’m already having a lot of fun with it. Now, there’s a sale on the KS Pro Wheel for $220 USD.
I’m not sure if I need the wheel right now, but I’m also worried that I might miss out on the deal if a sale like this doesn’t happen again anytime soon.
Have there been any similar discounts since the KS Pro Wheel was released? Also, what’s the lowest price you’ve ever seen it go for?
I'm currently running a Moza R5 bundle with the stock SR-P Lite pedals. They're currently going back under warranty (accelerator not registering in Moza Pit house), so I'm thinking about upgrading instead of just getting them replaced.
My main issue besides the fault is the noise. It produces loud clunks when the pedal gets released abruptly and hits the end stop. I’ve tried putting soft pads on the metal parts that make contact, but it didn’t do much and the clunk is still there.
So my question is : are load cell pedals noticeably quieter in practice? I'd expect elastomers and a shorter brake travel to help, but I'd love to hear from people who actually own LC and/or made the switch.
I'm considering selling the srp lite for a SRP2 (or CRP2) + clutch
If you own any of these, how loud are they? Do the throttle or clutch also clunk when you release them quickly? And if somehow, someone found a good fix for the SR-P Lite noise, I'm all ears.
On the 20th I got my r3 in the mail and the night i got it i set it all up and i wanted to play farming simulator 25 with the soft limit set to 900, 450 on each side. How do i enable it after it worked for the first night and it hasn't worked at all since Friday night and I have tried almost everything it my first ever wheel base from moza.
I have no force feedback on assetto corsa, when i start playing about 2 weeks ago it happened but a simple restart of the game would fix the problem and now even restarting the games multiple times it wont work.
It entirely depends on luck sometimes from what my experience, and i tried disconnecting and reconnecting the wheel in game still don't work.
Also does anyone have the same problem on ACC i am planning to buy because of the sale, if you guys experience the same problem on ACC maybe i won't buy.
last update on moza pithouse cause r5 base disconnect and reset shortly after use, no way to use wheel. try rolle back last three firmware ubdate but no diference they reset all the time.
The only thing I didn’t like about my KS Pro was the plastic used for the knobs. So, I found some aluminum replacements online and have tried various configurations. I like using the smaller 21mm knobs on the numbered rotaries to show the full LEDs. I’d seen this kind of look on BavarianSimTec wheels and wanted to try it on the KS Pro.
The anodized aluminum knobs and funky switches feel so much nicer.
I also added some thin foam pads on the shifter paddle magnets to shorten the travel a little bit and make it require less force to shift. Also makes them quieter.
Between mods and customizing advanced dashes with Azom, you can really make this wheel exactly how you want.
I purchased the knobs from SimRaceMods, buy any knobs made for 6mm D shaft potentiometers will work for the rotaries.
I am probably going to pick up some of the new haptic pedal modules so I can feel some of the road and tell when I actually lock up the breaks in dirt rally 2 but I dont know anyone who have actually used them on a rally game. Anyone have experience and can tell me whether they think its worth it or not?
I recently purchased the R3 bundle to see if I would enjoy sim racing/driving as I am a school bus driver for my day job and absolutely love it. I've driven many air brake and mechanical brake busses, as well as driving multiple cars regularly. The brake pedal that comes with the R3 bundle is the most stiff and hard-to-use pedal I have used in my entire life; requiring more force to fully press down than an air brake pedal. This has left me demotivated to use the brake at all.
I keep looking this issue up online and have found no solutions of any kind, as well as very few people with this complaint. Instead, I find band-aid fixes like "change the max distance in pit house" which doesn't address the fact that any distance on the pedal is very hard to achieve as it has the same stiffness all the way through. I also see people say it will break in, but nobody says it magically feels soft and usable after it breaks in, and instead I see people claim that it's normal that it's this difficult to use. The biggest issue with breaking it in is that I feel demotivated to use the brake at all due to how hard it is to use in any capacity.
I see some people saying to use the performance kit, but there isn't one available on the moza website for these pedals -- with the only kit being for the Lite2 pedals. Is there something I'm not understanding about these pedals? I've seen a comment from a GT driver (don't remember which post) who had also claimed the pedal is a bit too stiff and doesn't represent the real thing, but sadly I'm yet to drive in an actual race car so I do not have my own personal experience in one. From what I read about them, it seems most are just slightly harder to brake than a road car, but nothing like this. I would like to return this bundle and get the R5 bundle so I can try using the SR-P Lite2 pedals with the performance kit, but I don't believe I am eligible for a return according to their policy since I already opened and used it (it has not been 14 days, and sadly I ordered directly from moza).
I knew I wasn't getting a brand-new product, so I was prepared for some cosmetic damage. That's perfectly fine. What I wasn't expecting was the absolutely terrible packaging and missing parts.
Apparently, nobody thought it was worth checking whether the box actually contained everything. I'm missing screws and the tool needed to tighten them. Great quality control, MOZA!
I'll try to find some screws and something to mount the wheel with. Hopefully, the thing actually works. I'll update this post once I've tested it.