r/projectcar • • 8h ago

Build Progress 1995 SXV10

Thumbnail
gallery
337 Upvotes

Has been repainted, fixed some of the few rust spots, all parts of the suspension new or painted and new bushings, the only part I didn't change was the handbrake cables. Sound deadening, engine rebuild nearly complete (new pistons, all bearings, seals, some goodies) interior has had some things done too still need to buy fancier seats and do a manual swap and have a friend weld a stainless exhaust.


r/projectcar • • 10h ago

1972 cutlass

Thumbnail
gallery
76 Upvotes

1972 Oldsmobile cutlass is finally getting some attention. New black ceramic coated headers, 2 1/2 inch full length exhaust kit, remflex header gaskets and ARP fasteners. Powermaster 100 amp one wire alternator, powermaster gear reduction mini starter, oil change, lube job and new air filter


r/projectcar • • 5h ago

Rotating assembly balanced. Starting to reassemble my forged bottom end.

Post image
25 Upvotes

r/projectcar • • 6h ago

Project Cars are Environmentally Friendly

30 Upvotes

Mines zero emissions since its been under a cover for a year 😢


r/projectcar • • 12h ago

Today we made fire!

Thumbnail
gallery
70 Upvotes

I snagged a battery and reinstalled my rebuilt starter and carb. Managed to get it cranking, filed the points a bit and the poly 318 momentarily fired huffing starter fluid.

Fuel pump seems shot, but oil pressure is there and no scary sounds so far.


r/projectcar • • 19h ago

Ford model t transmission repair begins

Thumbnail
gallery
149 Upvotes

Yanked engine to rebuild the hogs head pedal assembly. Bushing replacement on planetary gears and possible Kevlar band replacement. I tried to drive this car from Buffalo ny to Tennessee 2 years ago. I made it one hour from home and blew out first gear. Time to fix this ol girl


r/projectcar • • 9h ago

I can do this…

Thumbnail
gallery
17 Upvotes

For the fucking love. I’m in the custom wiring shit right now and these dtp connectors are going to make me lose my shit. I whiped a rod bearing and then I decided I’d learn to weld. I really hope this mini truck runs in the next month. Send me words of encouragement, beers, Amazon gift cards. I’m dying 50 dollars at a time.


r/projectcar • • 14h ago

Shitposting Whats the most comfy seat you can think of?

12 Upvotes

Im gonna browse the local junkyards for a comfy seat so i can build a sim setup for GT7. I prefer a manual seat but i will wire up a power seat if I have to.


r/projectcar • • 7h ago

What should I look out for?

1 Upvotes

Im looking for my first project car and I am thinking of getting a running 82 trans am as a first car, I've been doing some research but would also like to hear from anyone whos personally owned this vehicle on like things to watch out for or specific idiosyncrasies that these cars have, anything you think would be helpful would be great to know!


r/projectcar • • 1d ago

Dammmmm she looks good

Post image
202 Upvotes

r/projectcar • • 10h ago

Build Progress Mini me build is alive!

Thumbnail
tiktok.com
0 Upvotes

Shes moving under her own power again! Definitely got a couple things i gotta work out and get buttoned up. But so far she's moving again! What a journey?.


r/projectcar • • 1d ago

Charging up my 1984 Lesabre's AC with R414b

23 Upvotes

Charging up my 1984 Lesabre with R414b after repairing the A/C system. Blows ice cold. Yes the gauges are hooked up backwards I had to use a few different adapters and fittings to make it work.


r/projectcar • • 2d ago

I present to you my $500 Omega

Thumbnail
gallery
845 Upvotes

I don't know how one of these is still on the road given the problems they had when new but it was fairly mint, plus it runs and drives.For $500 I couldnt say no. Bought with a friend and its been a comfortable car. Been doing light cosmetic repairs here and there and my friend has done some mechanical maintenance.


r/projectcar • • 1d ago

Modified to digital at home👍

38 Upvotes

r/projectcar • • 1d ago

Still got a long way to go, but we hit the mile mark of actually firing up the engine!

39 Upvotes

(Also, disregard the smoke, it's not from the engine, it's for checking for vacuum leaks.)

Now to work on stabilizing the idle.

(To which, if anyone has any suggestions on the step by step process for doing so, we would be much appreciated. Specifically for Megasquirt V3.57 and TunerStudio.)


r/projectcar • • 2d ago

Build Progress Interior is progressing

Thumbnail
gallery
90 Upvotes

He is clean like a very clean thing.

I like my near-zero dollar pedal (and deadpedal) treatment. Grip tape on the 3 left, metal finish and paint on the gas pedal.

Top goes on this weekend.


r/projectcar • • 2d ago

Here are more photos of the Diablo 6.0 based on a Fiero.

Thumbnail
gallery
146 Upvotes

I’m sure I have more on my old harddrives, I’ll post those once I have the time but for now here are a few more!


r/projectcar • • 2d ago

94 Cherokee Bush Rig

Thumbnail
gallery
49 Upvotes

Cheap jeep challenge is coming along nicely, I'd say I'm almost done. Still needs custom interior, bumpers, fenders cleaned up, rear quarters folded, and some steering work, WJ conversion and reinforcement brace. Its lifted about 3.5 inches, on 33's.


r/projectcar • • 2d ago

2026 was a good year for the old cat

Thumbnail
gallery
174 Upvotes

I put over 2000 miles on it, which included its first car show in the post-Harambe era, my wedding, and lots of backroads. The forecast looks like this weekend is the end of cruising till spring, so I thought I'd take a moment to look back at this year's highlights with the Mercury.


r/projectcar • • 2d ago

Big block 460 ford is in!

Post image
105 Upvotes

r/projectcar • • 3d ago

Fiero based Diablo 6.0, build by us over a decade ago and still being maintained. Drives better than our real one and cheaper to maintain. To this day, still our best build.

Thumbnail
gallery
1.0k Upvotes

r/projectcar • • 2d ago

Build Progress Bradley GT2 donor car

Thumbnail
gallery
33 Upvotes

Just wanted to show the donor beetle I'm going to use for the Bradley. 76' Standard beetle, which some of you may wonder why I am going to use as the donor if the GT2 already has a frame, but I have decided that I want the benefit of independent rear suspension on the 76's frame for the GT2. That's all! (Will show motors and GT2 parts in next post)


r/projectcar • • 2d ago

Heart says keep the carb 302 in my '69 Mustang, head says EFI swap for something I'll actually drive

38 Upvotes

Picked up a 1969 Mustang coupe a few months ago that's been sitting since the early 2000s. Body is surprisingly solid with only minor rust, but the original 302 is tired, leaks oil everywhere, and the carb setup is a pain to keep tuned. I already have a decent set of Holley parts and can rebuild it for relatively cheap, but I keep thinking about how much nicer it would be on longer drives with modern EFI.

I like the idea of keeping it period-correct with a rebuilt carb motor and keeping the original look, but I also know the car will probably sit more if it's not reliable for weekend trips. The EFI route would cost more upfront and require some fabrication, but it seems like the better long-term decision.

Anyone gone through this with an old Mustang or similar classic? Did sticking with carburetors end up being fine, or did you regret not making the swap earlier?


r/projectcar • • 2d ago

Idle Issue, help please before I lose my mind...

Post image
10 Upvotes

For anyone following along with the build, the NA miata is coming along but as per usual, I have managed to hit a snag now..

I am getting some erratic idle issues, sitting in neutral if the throttle is blipped it will sometimes go to 1800 rpm and sit there for a few seconds, then drop to sub 700 and stumble then come back and bounce between 850-1100.

Tried a bunch of things, checked for air leaks, new plugs/leads, going to try replace the pcv valve incase thats stuck or allowing an air leak in but I dont want to keep throwing money at the car in hopes the cash will clog the problem.

Any ideas would be greatly appreciated, the timing has been advanced to 14 degrees with the TEN and GND pins ground, and the idle was adjusted accordingly to 850.

It seems to be better once the car warms up, although it can on occasion do some funky idle when stopped during driving.

If you are following along with the build series the new episode has dropped, the link will be in the first comment! Thanks for the help guys, saving my bacon!