r/projectcar • • 2h ago

Shitposting Bought my first car (2000 integra) two days ago. A wheel nearly came off before my dad even made it to the interstate. Mostly a story post

Post image
0 Upvotes

How i got the car:
found a 2000 Integra for $3k in the Miami area, I brought my dad along and basically used him as my PPI.. Looking back, I should’ve had an actual mechanic inspect it before I bought it. It was not in perfect driving condition as described.

Almost died:
My dad drove it home with me tailing him and was about to go on the interstate when i saw the wheel moving to the side.. i honked and him and we literally pulled over at the turn into the interstate highway. It is I95 and if you know that is one of the most dangerous highways. I couldve lost my dad right there. The wheel was coming off the car!

Mechanical troubleshooting:
On that same drive, there was thick white smoke coming from the exhaust whenever the car idled, and it smelled like raw gas. The turn signals don’t work either, there was a problem with the battery that the car struggles to turn on as well.

Repair question:
I thought i would get a few calm months with that car until i can save enough money to repair it enough to be reliable but now seeing it break this fast I would like to ask. If i fix these issues how possible is it that it would break again and be a money pit?

Afternote:
i would appreciate not being called a idiot or being told im screwed bluntly without any advice to help. I already know im screwed but would like advice of what I could do now. That was my whole savings and im already stressed out how it is and know my wrong part of not getting it inspected.

I would like to make videos fixing it but i am also scared that if i fix it and it breaks again then it would be a money pit. I only have experience fixing computers/electronics so im not sure how similar that is to reliability after fixing.


r/projectcar • • 6h ago

Build Progress Half Inch Short is a new YouTuber showing how to do a project car exactly right

79 Upvotes

This guy is still under 1000 subs, I have no idea how YouTube decided to show me his stuff but I'm glad that it did.

He's going through a project where he takes a 1976 Dodge Dart and is trying to make it into a comfortable and reliable daily for $5k. He's an expert fabricator and is showing how to break a big project into manageable stages.

He bought the car with a seized slant 6 and 3 speed auto, and is putting a truck 5.2 Magnum with a 4 speed auto into it. To make it fit and work like a more modern car, he's swapping to an S13 suspension and steering with Z32 brakes.

He has a super low key presentation style and his videos include a lot of detail without getting boring.

I strongly encourage you to check his stuff out, especially if you're in the beginning stages of a project.


r/projectcar • • 17h ago

What should I look out for?

5 Upvotes

Im looking for my first project car and I am thinking of getting a running 82 trans am as a first car, I've been doing some research but would also like to hear from anyone whos personally owned this vehicle on like things to watch out for or specific idiosyncrasies that these cars have, anything you think would be helpful would be great to know!


r/projectcar • • 20h ago

Build Progress Mini me build is alive!

Thumbnail
tiktok.com
3 Upvotes

Shes moving under her own power again! Definitely got a couple things i gotta work out and get buttoned up. But so far she's moving again! What a journey?.


r/projectcar • • 17h ago

Project Cars are Environmentally Friendly

69 Upvotes

Mines zero emissions since its been under a cover for a year 😢


r/projectcar • • 23h ago

Today we made fire!

Thumbnail
gallery
80 Upvotes

I snagged a battery and reinstalled my rebuilt starter and carb. Managed to get it cranking, filed the points a bit and the poly 318 momentarily fired huffing starter fluid.

Fuel pump seems shot, but oil pressure is there and no scary sounds so far.


r/projectcar • • 21h ago

1972 cutlass

Thumbnail
gallery
95 Upvotes

1972 Oldsmobile cutlass is finally getting some attention. New black ceramic coated headers, 2 1/2 inch full length exhaust kit, remflex header gaskets and ARP fasteners. Powermaster 100 amp one wire alternator, powermaster gear reduction mini starter, oil change, lube job and new air filter


r/projectcar • • 16h ago

Rotating assembly balanced. Starting to reassemble my forged bottom end.

Post image
96 Upvotes

r/projectcar • • 19h ago

Build Progress 1995 SXV10

Thumbnail
gallery
601 Upvotes

Has been repainted, fixed some of the few rust spots, all parts of the suspension new or painted and new bushings, the only part I didn't change was the handbrake cables. Sound deadening, engine rebuild nearly complete (new pistons, all bearings, seals, some goodies) interior has had some things done too still need to buy fancier seats and do a manual swap and have a friend weld a stainless exhaust.