r/3DScanning • • 2h ago

Scans full of holes and noise? I built a free tool that cleans them up and exports solid STEP

2 Upvotes

A friend of mine has a 3DMakerPro scanner and kept asking me to help clean up his scans so he could print replacement parts or open them in SolidWorks. I'm a mechatronics engineer working in software, not really a 3D person, and I couldn't find an easy path. The STL opened as a graphics body, I couldn't get a proper part, and I couldn't even get the mesh closed without holes.

So I built a browser tool for him. You drop in a scan (STL, OBJ, PLY) and it:

- closes holes and removes floating junk

- smooths noise, with a protect brush for holes that should stay open

- snaps cylinder-ish areas to perfect cylinders and flat areas to real planes

- exports a solid STEP for SolidWorks / Fusion, plus STL and 3MF for printing

Free, no account, and it runs entirely in your browser, so your scans never get uploaded.

garbagetocad.com

I'd love to hear what scanners you use and which scans break it. Send the ugly ones my way, that's how I'll make it better.


r/3DScanning • • 3h ago

Scanned my Bosch tools with the Creality Pika and turned the scans into snug-fit Gridfinity bins – scan → script → verified print

Thumbnail
gallery
12 Upvotes

I've been wanting proper Gridfinity homes for my measuring tools for a while, but modeling contoured pockets by hand for oddly shaped devices is a pain. So I tried a scan-based workflow instead – first result is a bin for my Bosch GDH 1-17, more coming.

The workflow

  1. Scan – Scanned the device with the Creality Pika (Creality Scan software), exported as a watertight STL. The scan noise is still visible in the raw mesh, which is why step 3 matters.
  2. Align – A script auto-orients the scan: display face up, long axis along X, tilted slightly to get the lowest possible height (saved a few mm → one Gridfinity unit less).
  3. Generate the pocket – Instead of just booleaning the raw scan (which gives you every bit of scan noise and undercuts), the pocket is built from a height map of the underside:- vertical walls so the device lifts straight out (no undercuts)- 0.5 mm clearance all around- smoothing that is only allowed to *remove* material – the pocket can never get tighter than the scan, but the surfaces end up looking modeled instead of scanned- screw holes and small recesses in the device are bridged, so no little "noses" poking up
  4. Finger grips – straight-walled slots along the outer wall on both sides, deep enough to actually get your fingers under the device. Outer wall and stacking lip stay intact.
  5. Gridfinity body – standard base profile and stacking lip, smallest grid size that fits, device sitting as high as possible while the bin stays stackable.
  6. Verify before printing – the script checks:- overlap volume between scan and bin = 0, even with the device shifted 0.3 mm in every direction- base profile and stacking lip measured on the final STL against the Gridfinity reference dims (caught a bug in an early version where the 1.8 mm vertical section of the base was missing – glad I checked)

Full disclosure: I wrote the scripts together with an AI assistant (Claude). The scan, the design decisions and the test prints are mine, and the model is tagged accordingly on Printables.

Result: 6x2x8 bin, prints without supports, device drops in and comes out easily, display readable without taking it out.

Printables: https://www.printables.com/model/1925293-gridfinity-bin-for-bosch-gdh-1-17-contoured-insert

More bins coming over the next weeks – a Bosch GLM 50-27 laser distance meter is already designed and others will follow. Happy to hear which tools you'd want to see, and I'm also happy to answer questions about the workflow.


r/3DScanning • • 5h ago

[Request - Tacoma, WA] Student looking for a local 3D scanning hobbyist to help scan a classic car for a woodshop project

2 Upvotes

I’m a high school student in the Tacoma, WA area working on a woodshop and CAD fabrication project. I’m designing and building a full-scale wooden body buck of a 1969 Shelby GT500 Convertible in Autodesk Fusion, and I need an accurate 3D mesh of the exterior to slice my cross-sections.

I am currently reaching out to local collector car owners to get permission to scan a car, and I’m looking for a local hobbyist or enthusiast with a large-object handheld scanner (like an Einstar, Revopoint Miraco, Creality Otter, etc.) who might be willing to help me capture it once I lock in a date and location.

A few important details:

  • 100% Contactless: Since this is a rare collector car, we cannot use adhesive tracking dots or scanning spray on the paint—so a markerless/feature-tracking infrared or structured-light scanner would be ideal.
  • Time & Location: Likely around Tacoma / Pierce County (or nearby South Sound), taking about 20–30 minutes depending on the owner's schedule.
  • What I need: Just a decent exterior surface mesh (.OBJ or .STL) with accurate overall proportions for slicing plywood stations in Fusion—it doesn't need sub-millimeter engineering tolerances.
  • What I can offer: A chance to scan a really cool classic Shelby, credit on my project, and I can also try to cover a small thank-you/gas stipend if needed.

If you're local to the South Sound / Tacoma area and interested in helping out (or have advice on tackling a glossy car markerless), please drop a comment or DM me!

Thanks!


r/3DScanning • • 13h ago

3D Scanner for plastic fenders

2 Upvotes

Hi guys, I have a side project I’m working on for a relative of mine for remaking some fenders for a Yamaha 225DX three-wheeler.

We have the original OEM fenders but are in subpar shape so our goal is to get them remade as a replacement to the original fenders. I currently work in the Additive Manufacturing industry and have experience with 3D printing and the post-processing of those components so I’ve been brainstorming ideas of ways I can incorporate the two together. I’m reaching out here because I’ve been considering the additive route to recreate these fenders but my main roadblock now seems to be an accurate way to create models to then have printed. I’m looking into using the 3D scanner route as an avenue into creating the most accurate models as possible as something like creating a mold seems to be a less accessible alternative for my current situation. Is there someone out there or a way to rent a higher-end scanner to have these parts scanned? Or is there another option that may be a better fit for what I’m looking to accomplish? I have more experience in the physical aspects and finishing process of the AM industry so I’d be interested to hear any opinions or other unique options you all may have!


r/3DScanning • • 16h ago

How to add thickness only to single-sided/non-manifold areas of a high-poly scan?

Thumbnail
gallery
4 Upvotes

Are there any tools that can add thickness only to those parts of a scan that currently lack it? The complex geometry of the skull includes both closed volumes and surfaces that have no thickness. Standard thickness modifiers—like those in Fusion 360 or the "Solidify" modifier in Blender—don't work in this case. I am unable to rebuild the model from scratch based on the scan, and performing a "remesh" in Blender isn't feasible due to the massive number of triangles.


r/3DScanning • • 19h ago

3D Scanning Comparison: Creality Raptor Pro vs. Ferret Pro

Thumbnail gallery
4 Upvotes

r/3DScanning • • 19h ago

Lenovo ThinkEdge Server

Thumbnail
gallery
4 Upvotes

After a week or so of experimenting, scanning in some old projects, some frustration with the new(to me) software, poking at and changing settings, I have gotten enough of a handle on the Metro Y to try a real client object.

The Lenovo ThinkEdge SE-100 is a 1U high but otherwise 1/4-sized version of one of Lenovo's standard Core i7 "pizza box" rackable servers.
Specs here for the curious: https://www.compsource.com/buy/7DGR1001NA/Lenovo-1223/Thinkedge-SE100-7DGR1001NA-Server

For us here, the important specs are that it's matte black metal casing where cooling fins and angular surface geometry are part of the case itself.
From the side, the profile looks like __/---__/---\.
Just to make it even more fun, there are a pair of fans are recessed deep inside the case itself.

I scanned on a dark table with markers placed around it(It covers the markers on the included turntable) and added a few to the edges of the server itself.
The settings were: CrossedLines scanning, Marker Mode, High Accuracy, Black Object.

I made 9 passes from different sides and angles as separate scans and used 6 of them. I did selective hole-filling vs. letting Metro auto-fill them because I was almost certain it would mess up the opening around the fans.

One additional thing I might try would be a scan of the tops side in single-line mode to see if that catches the space between the cooling fins better than cross-line model which left a lot of holes in those spaces between the cooling fins. For now the hole-detection & filling function did a good job patching them.

Overall, I'm actually quite happy. There's a lot of purchase validation wrapped up in those screenshots there.


r/3DScanning • • 21h ago

Where in Austin should I 3D scan next?

2 Upvotes

r/3DScanning • • 22h ago

my scanner needs a pruchase verification which i don't have what to do?

1 Upvotes

so i got a 3d maker pro seal as a gift and won't automatically connect to my pc (for some unknown reason) the software makes me do it manually but to do so i need to send the device's label and proof of purchase, problem is, since it is a gift, i don't have a way to recover anything like an online order or anything with a purchase date like the website asks me is there any other way to do it?