r/3DScanning • u/ScallionNo8964 • 3h ago
Scanned my Bosch tools with the Creality Pika and turned the scans into snug-fit Gridfinity bins – scan → script → verified print
I've been wanting proper Gridfinity homes for my measuring tools for a while, but modeling contoured pockets by hand for oddly shaped devices is a pain. So I tried a scan-based workflow instead – first result is a bin for my Bosch GDH 1-17, more coming.
The workflow
- Scan – Scanned the device with the Creality Pika (Creality Scan software), exported as a watertight STL. The scan noise is still visible in the raw mesh, which is why step 3 matters.
- Align – A script auto-orients the scan: display face up, long axis along X, tilted slightly to get the lowest possible height (saved a few mm → one Gridfinity unit less).
- Generate the pocket – Instead of just booleaning the raw scan (which gives you every bit of scan noise and undercuts), the pocket is built from a height map of the underside:- vertical walls so the device lifts straight out (no undercuts)- 0.5 mm clearance all around- smoothing that is only allowed to *remove* material – the pocket can never get tighter than the scan, but the surfaces end up looking modeled instead of scanned- screw holes and small recesses in the device are bridged, so no little "noses" poking up
- Finger grips – straight-walled slots along the outer wall on both sides, deep enough to actually get your fingers under the device. Outer wall and stacking lip stay intact.
- Gridfinity body – standard base profile and stacking lip, smallest grid size that fits, device sitting as high as possible while the bin stays stackable.
- Verify before printing – the script checks:- overlap volume between scan and bin = 0, even with the device shifted 0.3 mm in every direction- base profile and stacking lip measured on the final STL against the Gridfinity reference dims (caught a bug in an early version where the 1.8 mm vertical section of the base was missing – glad I checked)
Full disclosure: I wrote the scripts together with an AI assistant (Claude). The scan, the design decisions and the test prints are mine, and the model is tagged accordingly on Printables.
Result: 6x2x8 bin, prints without supports, device drops in and comes out easily, display readable without taking it out.
Printables: https://www.printables.com/model/1925293-gridfinity-bin-for-bosch-gdh-1-17-contoured-insert
More bins coming over the next weeks – a Bosch GLM 50-27 laser distance meter is already designed and others will follow. Happy to hear which tools you'd want to see, and I'm also happy to answer questions about the workflow.