r/3Dprinting • • 12h ago

Question Curious about ultrafine particles(UFPs)

6 Upvotes

I'm just getting into 3D printing and have been reading about ultrafine particles (UFPs) and volatile organic compounds (VOCs) being released during the printing process. How do you guys handle this?

I was thinking of getting an enclosed printer and building an exhaust system that vents outside through a window, but even then, I'm hesitant to have it in a room where I spend a lot of time because of potential leaks. I also have cats that would be around the printer, which adds to my concerns.

I've noticed that a lot of people use open-frame printers and just set them up wherever, seemingly without much thought about the potential health implications. We hear so much about microplastics and their effects on our health, yet here we are running machines that can release large numbers of ultrafine particles directly into our living spaces.

How do you handle ventilation and exposure? Do you take any precautions, or is this something you don't really worry about? I'm genuinely curious whether I'm being overly cautious or if this is something the 3D printing community tends to overlook.

Edit- People are down voting this. Yikes. Either you are unaware or ignorant of the fact. Here are some studies to back up what i'm claiming;

https://www.sciencedirect.com/science/article/pii/S1352231013005086?via%3Dihub

https://pubs.acs.org/esthag/article/50/3/1260/825584/Emissions-of-Ultrafine-Particles-and-Volatile

https://pubmed.ncbi.nlm.nih.gov/26550911/

https://pubs.acs.org/achsc5/article/26/2/19/1775548/Evaluation-of-emissions-and-exposures-at

https://pubs.acs.org/estlcu/article-abstract/6/8/499/507129/Emission-Control-of-Desktop-3D-Printing-The?redirectedFrom=fulltext

https://onlinelibrary.wiley.com/doi/10.1111/jiec.12578


r/3Dprinting • • 12h ago

Project First time printing TPU, 85A for gaskets on an A1. I was scared to death (stupid I know) Gemini got me through the whole thing and it went great. I have been 3d printing for 2 weeks and this feels huge

Thumbnail
gallery
0 Upvotes

r/3Dprinting • • 10h ago

Question How do people do it

0 Upvotes

I see so many people with tons of colours and filaments and people making giant prints but I don’t understand where people are buying lots of filament for cheap. I go on Amazon and see 3 filament rolls for £40 and Im just puzzled by how people can get this? Maybe there is just a lot of money in 3d printing and I’m just a broke person that should go back to living normally. There has got to be others like me??


r/3Dprinting • • 6h ago

Free Model Mandy wall-art

Post image
0 Upvotes

r/3Dprinting • • 1h ago

Question Why is my printer sneezing?

1 Upvotes

I was printing a tpu test piece and I noticed that my printer was moving back and forth at regular intervals. Do y'all have any idea why?

Printer: A1 mini

Filament: Bambu TPU 85A


r/3Dprinting • • 32m ago

Discussion Is it just me...

Post image
0 Upvotes

r/3Dprinting • • 1h ago

Project Zippo fidget, took too long!

6 Upvotes

Spent way too long on this.

wanted a Zippo fidget could print and actually use. Everything I found was a kit. Springs, pins, a wheel you have to press in. Or a flip lid that did not look like a Zippo at all.

So I made a print-in-place one. Lid, hinge, spring, striker wheel, all one piece. Pull it off the plate, let it cool, and it already snaps shut and the wheel clicks.

The click took forever. The snap too. have been sitting here opening it for no reason.. Silk looks good on the texture.


r/3Dprinting • • 40m ago

Discussion GTA devs forgot about ventilation

Thumbnail gallery
27 Upvotes

r/3Dprinting • • 6h ago

Hardware ASA compatible printers but dryers only go to 65°C?

0 Upvotes

I’m looking at getting my first 3D printer and have been doing quite a bit of research, mainly because I want to print ASA for car parts.

One thing I don’t quite understand is why manufacturers like Anycubic and Bambu advertise their printers as ASA compatible, but then the filament drying systems included with them only go up to 65°C.

From what I’ve read, ASA generally needs around 70 to 80°C to dry properly?

Am I missing something here?

Is 65°C actually enough if you leave it drying for longer, or are people using separate dryers before putting the filament into the AMS/ACE?

Just curious what everyone actually does in practice, especially those printing ASA regularly.


r/3Dprinting • • 23h ago

Troubleshooting What happened here and how do I prevent this

Thumbnail
gallery
0 Upvotes

I’m completely new to 3d printing and have had successful prints before but this happened to one of my of my more recent prints and I’m curious what the hell happened here


r/3Dprinting • • 16h ago

Troubleshooting Overhang Problems

Post image
0 Upvotes

I need to clean this up. Material is PLA Matte on a Bambu A1. Before I share current settings I should write that other overhangs on the same model look good. Only this one is problematic.

Settings: Nozzle 0.4 Layer ht 0.25 Inner & outer wall line width 0.6 (these may seem high but it's to keep production cost down) No scarf seams Walls inner/outer 2 walls Overhang speeds are 100% @ 2, 75% @ 5, 50% @ 10, 25% @ 30. Outer wall acceleration 400.

Filament: Flow 0.98 Nozzle temp 205 Min fan 40% @ 45 seconds Max fan 70% @ 6 seconds Always on Overhangs threshold 50% Overhangs fan speed 100%

If there are any other settings I can share that'll help then just say so.

TIA


r/3Dprinting • • 7h ago

Print (model not provided) New nozzle size 0.5"

Post image
0 Upvotes

r/3Dprinting • • 17h ago

Free Model This is my new Door Hanger Sign 🎮😎

Thumbnail
gallery
0 Upvotes

r/3Dprinting • • 7h ago

Troubleshooting First anime figure print

Thumbnail
gallery
0 Upvotes

Hi everyone, this is my first 3D printed anime figure, printed on an Elegoo Centauri Carbon 2 using Matte PLA. Overall I think it came out really well—the layer lines are barely visible to the naked eye on most of it—but there's this area on the underside with noticeable layer lines, as well as on the tail.

I'd like to understand if there's any way to fix or improve this, or if it's just an inherent characteristic of 3D printing since that's the part I placed flat on the build plate to print. Any advice on slicer settings, orientation, supports, or post-processing would be much appreciated!


r/3Dprinting • • 11h ago

News This 3D Printer Has No Motors (no belts)! The Engineering Behind the LightMake L4

Thumbnail
youtube.com
62 Upvotes

just found this video , looks like some pretty cool tech


r/3Dprinting • • 3h ago Popcorn

Project New printer and enclosure!

Thumbnail
gallery
81 Upvotes

I’m a complete newb and this is my first printer. After I ordered the printer I started reading about VOCs and UFPs which was alarming because I spend a lot of effort on maintaining good indoor air quality(I guess that’s obvious by the enclosure…).

I completely fabricated the enclosure from scratch and it was WAY more challenging than I imagined but I’m glad I did it. It vents directly outside and maintains negative pressure inside the enclosure. Rear access door allows easy access when needed and the top is completely removable if needed.


r/3Dprinting • • 17h ago

Troubleshooting Anet AM8 issue, Doesnt print Square inside of Print bed help pls<3

0 Upvotes

Crosspost so i could reach more people

Dont Mind the Messy bed<3

So after a Year i finaly have taken time to give my oldie some care but already hit a road block and honeslty just comfused.

i know it worked mostly fine before i stoped using it, only had a problem with my carraige rods/bearings basically locking up caused by not being 100% aligned strait and caused alot of vibrations i fixed that issue a couple of days ago, and i also bought a new Carriage plate to replace the old flimpsy stock one pic on the new one in comments.

But now when i was going to do a bed level test print i notised the hotend went outside the build volume, havent seen that happen before i Straightened the Guide rods on the carriage and installed new carriage plate.

What might i have done to get this issue? might it just be a cura problem?


r/3Dprinting • • 4h ago

Question Qeustion regarding ventilation

Post image
0 Upvotes

Currently housesitting for someone whos gone for 3 months so i brought my printer with me. And i am wondering if this closed hallway is good enough to 3dprint in without worrrying about fumes. I only print using PLA on a bambu p1s. Whenever possible i try to keep that door open for a bit but its getting cold cos of winter, so the door is closed for long periods when printing. Finger is in the image to cover up private info.


r/3Dprinting • • 5h ago

Project Christmas Decoration – Minimalist Reindeer

Thumbnail
gallery
18 Upvotes

This time I've designed a new Christmas decoration in the form of a minimalist reindeer. Its simple, rounded shapes combined with distinctive antlers give it a clean and elegant appearance. 🎄

The model can be printed in any size to suit your preferences and complement your home decor.

✨ What do you think of this design? Do you like this minimalist approach to Christmas decorations? I'd be happy to hear your thoughts and any suggestions for future designs.


r/3Dprinting • • 19h ago

Project What should I add to my box truck shelf design?

19 Upvotes

First timer here and I designed this box truck shelf which got pretty popular on Instagram.

I recently came out with a customizable license plate add-on, as well as adjustable hooks for inside.

It’s currently uses no glue for assembly, has adjustable shelves, hooks & license plate as mentioned, as well as customizable door and walls…

I’m thinking of adding more attachments, but can’t really think of any. Maybe a back wall hook to hold packaged hot wheels?

Thoughts?


r/3Dprinting • • 16h ago

Project Santa at the Windows

Post image
0 Upvotes

r/3Dprinting • • 10h ago

Troubleshooting How do I fix this?

Post image
0 Upvotes

How do I fix this warping?
Ended 3 v3 se
Cura slicer
195 c
150 mm speed
Also have problem with stringing


r/3Dprinting • • 22h ago

Question Would you buy the Axiloop MC8 considering it's their first printer?

0 Upvotes

r/3Dprinting • • 2h ago

Discussion Am i missing something

0 Upvotes

Im making a spreadsheet to compare different filaments i wanna buy and those i already use, and i've reached the bambulab petg mate on that list...
Can someone, for the love of god, explain to me why the charpy notched XY test result of the PETG from polymaker is 4.95kj/m^2 , the one from polylite's ABS (which is supposed to be better in impact resistance than PETG) is 18kj/m^2, and with the exact same specimen specification and test conditions, bambulab shares their PETG matte as a 32kj7m^2??
I'm starting to loose my mind and would rlly like some help here. Are bambulab lying? Do they test different without saying it? Did i get the info wrong? Imma double take every bit of it all now but i'd really apreaciate some help here. Thx in advance.