r/3Dprinting • u/gmguy93 • 2m ago
r/3Dprinting • u/Curious-Afternoon899 • 14m ago
Question Feedback Needed!!!
Hi all! I am currently working on a project with some friends to recycle plastic bottles into 3D printing filament and then create products for local companies to increase sustainability in our community.
We would really appreciate some feedback on our idea so if anyone with 3D printing experience could fill out this form we would really appreciate it! Thank you! https://docs.google.com/forms/d/e/1FAIpQLSdYGuoQDzJn-YQza45bY95jJ0RswzfHFrBoV0DS1W2BATJsQA/viewform?usp=header
r/3Dprinting • u/OnlyLosersBlock • 14m ago
News Texas SB 1711 would ban 3D printed guns as other states push printer blocking
r/3Dprinting • u/Afraid-Mention-1675 • 24m ago
Project First Smart Rover build with an Arduino UNO Q inside. What would you change?
Hi All — this is my first robotics build, still learning. 4WD rover, chassis and top shell printed in PETG on a Bambu P2S, built around an Arduino UNO Q with Modulino modules. The onboard camera runs a face detection brick from the Arduino App Lab, and puts text on the three LED matrices. The FPV feed goes to a web HUD on my phone with a Backbone controller.
I wrote up the whole workflow here: https://medium.com/@grissomscottt/pointing-ai-at-atoms-what-happens-when-you-combine-a-3d-printer-with-an-ai-powered-ide-538168a0450b
I posted the print files and assembly guide on MakerWorld: https://makerworld.com/en/models/3660880-project-argus-brutalist-fpv-rover
As of this morning I am tweaking the app in Arduino app lab...then I will post it on git. For people who've built rovers before — what's the next capability worth adding? Open to any/all ideas!
r/3Dprinting • u/rob132 • 26m ago
Hardware PSA. You can use your spare filament rolls for storing your Christmas lights
And pro tip, put the electrical problems on the outside of the wheel so this way you can test your lights without having to unroll the entire thing.
r/3Dprinting • u/Worried-Relief-3836 • 34m ago
Troubleshooting Baffled.
I dont know how i went from this very nicely printed part to the absolute crap on the first layer of the next print.
Literally nothing changed. Prior to starting my print I ran calibration and everything was fine
Flashforge adventurer 5m using black pla from hobby lobby.
r/3Dprinting • u/Kezarelul • 34m ago
Free Model Designed and printed a Pyramid Head wall lamp for my room
Since I enjoyed the Silent Hill 2 remake so much, I decided to model and 3D print a Pyramid Head wall lamp for my room. Used some filler, primer, paint, and varnish to get that rusted metal look, and threw a smart LED bulb inside.
I put up the files for free on MakerWorld, so feel free to print your own and let me know how it went :)
What do you think about it and it's something you would have done different regarding painting?
r/3Dprinting • u/Madmaxneo • 45m ago
Question What is a good free site to make an adapter connector for 6" ducting?
I am new to 3D printing and will be getting my first 3D printer this coming Black Friday. It is already in my cart and I am waiting to see if the price will go down for Black Friday.
One of the first things I need to print is an adapter/connector for 6" ducting for my DIY airbrush spray booth. I have currently have a 6" duct connector with 5.9" ducting that connects to an inline fan on the other end. I want to replace the duct connector with this adapter and have the ducting fit over the adapter.
The duct connector comes out at a 45 deg angle from the top back of the spray booth (I made from a Sterlite storage container). I need the adapter to angle up about 35 to 45 degs then to the left (facing it) at a 90 deg angle then it will connect to the ducting.
I need this adapter because the back of the spray booth hits the back wall were all my paints are mounted so I need the ducting to not go beyond the back of the booth so it can fit on my hobby desk when in use.
I have found a few sites but some of them have subscription models and can only do basic shapes for free so I am not sure I would be able to make and edit something like this on them.
r/3Dprinting • u/Oren_Hargil • 57m ago
Troubleshooting Help needed :3
Hey yall printing doctors, i got a slightly broken ender 3 v1 for free, bought some new parts like new bed bushings and knobs and a new magnetic bed and i fixed it :3, im using PETG at the moment (245C for the nozzle and 75C for the bed), got my first print and i mean its fine but i want to improve the quality of it, the PETG filament was opened way before i got the printer(it came with the printer in cluding more replacment parts and a new sealed PETG roll,
Thanks for reading in advance, good day yall ! (The X is one of the sides and the stringy stuff is the bottom of it)
r/3Dprinting • u/kogashiwakai • 59m ago
Project My dad requested a spiny lobster for his ocean themed bathroom
This is the most cleanup I've needed to do so far. And was super stressed that the legs and antenna would crack. But the model is pretty strong.
I got the file here
https://www.myminifactory.com/object/3d-print-crabfish-lobster-378228
And it's a really good model. Really detailed.
I am going to apply paint to it to help give it some realism. I'm not much of a painter, but I'll have a bash
r/3Dprinting • u/rVulpesNM • 1h ago
Project 3D-printable platform extension compatible with Hornby's 00 platforms
galleryr/3Dprinting • u/ADynes • 1h ago
Free Model Filament Dry Box (Cereal) Wall and Under Shelf Mounts - Customizable & Parametric
There are a bunch of these out there already, but every one I found had flat side shelves, and on the cereal boxes I use (https://www.amazon.com/dp/B0FJY42KHD) the flaps on the sides are angled, so they teeter totter and aren't held securely. So I made a holder shaped to these lids, which it looks like many others also use. It slides in from the front, and with the little dip it holds the box securely without having to be as long as other ones.
There are default print profiles for a wall mount and an under shelf mount, each with a single and a double, but the real thing is the parametric model which lets you:
- Make a single, double or triple in one piece
- Change the slot width, height and depth, ledge size, and corner radii to fit your lid and box
- Leave the cradle on the sides for lid flaps that bow down in the middle like mine, or turn it off for flat side shelves
- Add a notch for a latch on the end of the lid
- Lock holders together with a hidden pin at the front and a bowtie key at the back
- Print a screw template to line up the next holder
- Switch the screw seats from pan head to flat head, with different sizes
Everything prints without supports, although you should use supports for the screw holes on the under shelf mount if you want them to stay clean. All the ones in my photos are printed in ABS. At the default settings they fit the box linked above exactly, and that's what all my photos are based on. But with all the options you can customize it to hold almost any container with a lid larger than the neck/base, like mason jars, baby food jars, etc.
Model is on MakerWorld: https://makerworld.com/en/models/3664108-filament-dry-box-holder-for-wall-or-under-shelf
r/3Dprinting • u/ComicallyLargeFarts • 1h ago
Project Getting your New Year's resolution in mind yet? I made a 52-week habit tracker!
I really wanted one of Simone Giertz's Every Day Goal Calendar but it's 'spensive, so I designed my own printable version. There's a dot for each day of 52 weeks, where you remove the dot on the days you complete your goal. Removing a dot reveals a contrasting color underneath. Meditation, working out, eating your broccoli---whatever you want to use it for. The core concept revolves around printing the calendar face down and using the printer's support material to create your removable dots. I also designed center hubs to add dimension and design elements, but it also includes a small slot where you can toss your discarded dots.
It's sized to max out the bed of my Bambu A1. Sizing was tough to make the dots big enough in the limited space I had, but still making it look pretty. There's a hanging assist part that you can use to mark the exact locations of the holes you need and also to set screw heights perfectly. There's also a support test part so you can get your setting dialed just right before printing the big part. The supports need to be easily removed, but adhere enough that they won't just fall off on their own.
I have a couple different version on different plates of the main print profile so you can print it with an AMS or with a single material change if you don't have access to an AMS.
I'm pretty proud of this one! I'd love to hear what ya'll think. I'm happy to share the MakerWorld link for those that are interested.
r/3Dprinting • u/ZalanBs • 1h ago
Troubleshooting A1 mini fillament started clumping
I have genuinely no idea whats causing this, 0.4mm nozzle, 100% speed, i dont have another nozzle in can swap to to test it, its same with other fillaments tho not this bad.
r/3Dprinting • u/Character-Judge-1981 • 1h ago
Troubleshooting X2D not sticking
Hi,
3 days ago I got the Bambu lab X2D and I have some smaller bits to print , but even with brim, it doesn't seem to stick long enough. Any ideas? I did notise there is some glue on the included PEI plate and it leaves residue on the print.
These are custom designed bits and I am printing with Elegoo PLA+ which I dried for 8 hours at 55 degrees C. When I started with the bambu handy app, it was printing fine, but with the default Bambu Studio preset, nothing seems to stick.
Temps:
Initial layer 220
Other temp 210
Textured PEI plate temps: 55 and 65 both let go
If anyone has encountered and solved this, help is appreciated.
r/3Dprinting • u/Miserable_Giraffe491 • 1h ago
Troubleshooting New to 3D printing
For some reason the prints started doing this, looking for help, thanks. (Creator 5 Pro, if that matters)
r/3Dprinting • u/Leading_Jeweler2069 • 2h ago
Question Hey guys, I need your advice and help!!
A little background: I am a first-year Computer Science undergraduate. Our college decided that teaching us 3D printing as a mandatory subject would be a great idea. We are currently being taught basic DFT and AM theory, along with some basic modelling in Tinkercad.
Now, our entire semester's marks depend on a project that we have to design and model ourselves. It will be printed by our college using a Bambu Lab P2S with PLA filament, so it shouldn't be too big either.
We need to make something that is not overly complex, but not too simple or clichéd either. It should have some daily life/ practical application and not just something decorative.
A few strict constraints:
- Absolutely NO moving parts.
- NO joining or assembling multiple parts.
- NO electronics involved.
Almost all my internet searches and AI brainstorming sessions lead me to the same clichéd ideas: simple pen and laptop stands, organisers, hooks, keychains, planters, etc.
I need something more innovative while still fulfilling all the requirements mentioned above.
Could you kindly suggest some ideas?
Note: We have to design the model entirely in Tinkercad. Once the professor finalises the design, it will be printed at college using a Bambu Lab P2S with PLA filament.
r/3Dprinting • u/Pippipiper • 2h ago
Question Anyone willing to sell laser cut plexiglass parts for a slant top hat for a U1?
reddit.comr/3Dprinting • u/Special-Frosting-162 • 2h ago
Project A Pair of 3D-Printed Over-Ear Headphones
galleryr/3Dprinting • u/obeya • 2h ago
Project Lost my scraper screws, so I designed a screwless scraper
r/3Dprinting • u/Shot-Violinist3088 • 2h ago
Question Issues with printing
Has anyone ever experienced this 'Air printing' before? The nozzle moves away from the print, extrudes filament, and then comes back to the print to print again.
Also getting extruding issues with bambu basic PETG black. Tried different nozzles, tried different ports in the AMS and get the same issues. Did the same with other branded filaments with no issues.
H2D printer
Bambu basic PETG
r/3Dprinting • u/Euphoric_Raccoon7446 • 2h ago
Troubleshooting Filament broke off inside Bowden tube :(
(FIXED) so my filament broke off inside my bowden tube and i’m trying to use a thing of pla to push it out but it is currently unsuccessful :/ any advice would be appreciated! (I have an Ender 3 pro)
Edit: thx for the advice :) I cut some of the tube off and used direct drive to get the rest out!
