r/3Dprinting • • 3h ago

Hardware PSA. You can use your spare filament rolls for storing your Christmas lights

Post image
827 Upvotes

And pro tip, put the electrical problems on the outside of the wheel so this way you can test your lights without having to unroll the entire thing.


r/3Dprinting • • 7h ago

Meme Monday Additive Potato Storage

981 Upvotes

r/3Dprinting • • 9h ago Popcorn

Project New printer and enclosure!

Thumbnail
gallery
157 Upvotes

I’m a complete newb and this is my first printer. After I ordered the printer I started reading about VOCs and UFPs which was alarming because I spend a lot of effort on maintaining good indoor air quality(I guess that’s obvious by the enclosure…).

I completely fabricated the enclosure from scratch and it was WAY more challenging than I imagined but I’m glad I did it. It vents directly outside and maintains negative pressure inside the enclosure. Rear access door allows easy access when needed and the top is completely removable if needed.


r/3Dprinting • • 13h ago

Project Project Done

1.1k Upvotes

The project, which I shared a portion of here some time ago, is now complete. For the parts where many suggested using TPU, I opted for NBR cushioning instead. For those who may have missed my previous post, this box is a soundproof enclosure designed to record and analyze the speech of patients with Parkinson’s disease. The main structure is made of wood, while components requiring specific, complex shapes were 3D-modeled and then 3D-printed.

Test results showed that we succeeded in reducing noise levels from 45–55 decibels down to below 40 decibels in an indoor environment.


r/3Dprinting • • 55m ago

Project I made an incense holder that fires smoke rings at random

Post image
89 Upvotes

I wanted something more fun than a regular incense holder, so I made a tiny cannon that fires real smoke rings. You put a backflow cone on top like a burning fuse, and a little motor inside makes it shoot rings at random, sometimes a quick double shot, sometimes a slow pause, big rings and small ones. It almost feels alive. Happy to answer any questions!

The 3D model is free to download here: https://makerworld.com/en/models/3614291-incense-cannon-smoke-ring-launcher#profileId-4142513


r/3Dprinting • • 4h ago

Project My dad requested a spiny lobster for his ocean themed bathroom

Thumbnail
gallery
155 Upvotes

This is the most cleanup I've needed to do so far. And was super stressed that the legs and antenna would crack. But the model is pretty strong.

I got the file here

https://www.myminifactory.com/object/3d-print-crabfish-lobster-378228

And it's a really good model. Really detailed.

I am going to apply paint to it to help give it some realism. I'm not much of a painter, but I'll have a bash


r/3Dprinting • • 2h ago

Meme Monday Spill

Post image
94 Upvotes

I got the ELEGOO Saturn 4 16k ultra and and keeps spilling while I’m not using it what could be the problem?


r/3Dprinting • • 6h ago

Discussion GTA devs forgot about ventilation

Thumbnail gallery
142 Upvotes

r/3Dprinting • • 3h ago

News Texas SB 1711 would ban 3D printed guns as other states push printer blocking

Thumbnail
youtube.com
73 Upvotes

r/3Dprinting • • 4h ago

Project Getting your New Year's resolution in mind yet? I made a 52-week habit tracker!

Thumbnail
gallery
71 Upvotes

I really wanted one of Simone Giertz's Every Day Goal Calendar but it's 'spensive, so I designed my own printable version. There's a dot for each day of 52 weeks, where you remove the dot on the days you complete your goal. Removing a dot reveals a contrasting color underneath. Meditation, working out, eating your broccoli---whatever you want to use it for. The core concept revolves around printing the calendar face down and using the printer's support material to create your removable dots. I also designed center hubs to add dimension and design elements, but it also includes a small slot where you can toss your discarded dots.

It's sized to max out the bed of my Bambu A1. Sizing was tough to make the dots big enough in the limited space I had, but still making it look pretty. There's a hanging assist part that you can use to mark the exact locations of the holes you need and also to set screw heights perfectly. There's also a support test part so you can get your setting dialed just right before printing the big part. The supports need to be easily removed, but adhere enough that they won't just fall off on their own.

I have a couple different version on different plates of the main print profile so you can print it with an AMS or with a single material change if you don't have access to an AMS.

I'm pretty proud of this one! I'd love to hear what ya'll think. I'm happy to share the MakerWorld link for those that are interested.


r/3Dprinting • • 19h ago Heartwarming

Paid Model Designed and made some new rims for my wheelie bins!

Thumbnail
gallery
877 Upvotes

I designed and made completely customisable wheelie bin rims which have gotten so much attention from neighbours and passer-by’s (but not the 🚔). These are for Australian bins but i can customise the size based on your country

I can design and make any custom requests, just send me a photo/message of your car or preferred design. I can do it in any colour combination too.

Just $20 per set! Send me a PM or use the below eBay link.

https://ebay.io/m/xgd33P


r/3Dprinting • • 3h ago

Discussion Bambu’s EU CEO says “we messed up” over the developer backlash. What would actually rebuild trust?

Thumbnail
youtube.com
26 Upvotes

Hey everyone!

I’m Ross from FauxHammer. I sat down with Cédric Mallet, Bambu Lab’s EU CEO, at Formnext and put the open-source and developer questions to him directly.

He says “we didn’t sue him”, but also “we messed up” when talking about how they handled it. That bit starts at 22:22. Open source is at 16:05.

We also got into whether P3C actually exists (7:01), what happens to existing owners when the next machine lands (12:45), the A-series (36:29), and why they haven’t gone into resin printing (39:05).

I’m curious what people here make of his answers. Is the closed ecosystem itself the problem for you, or how Bambu has handled developers and communication? What would they actually need to change?


r/3Dprinting • • 9h ago

Project Planet Earth as a puzzle

Thumbnail
gallery
81 Upvotes

r/3Dprinting • • 8h ago

Free Model Sauce Squeeze Savers!

Post image
55 Upvotes

If your kids go through as much sauce as mine then you'll probably appreciate these, easy quick prints, pictures are pretty self explanatory, 1 couples 2 bottles to drain an almost empty bottle into another and the other is a stand for keeping the sauce upside down.

These are staples in Australian homes, I don't think they are too common in other countries...

Print, rate, leave a comment!

https://makerworld.com/en/models/3661065-squeeze-saver-sauce-bottle-stand-drainer#profileId-4201951


r/3Dprinting • • 23m ago

Print (model not provided) I turned my rulers into calipers weeee

Thumbnail
gallery
12 Upvotes

I had a hard time measuring the top of my speakers because of the curved edges and I realised what I really wanted was some large calipers right now. Worked out great! Super convenient to measure exact dimentions of weird geometry.. well.. kinda like a caliper :P. I'll improve on it, this was the first take.

If people want this up lemme know, i'll happily post the model. Although I did use AI to design... unlike the cropping work you can see on my photo for the post :P. I know this sub is generaly.. not a fan of AI.


r/3Dprinting • • 11h ago

Hardware Adhesion was a bit too strong

Post image
75 Upvotes

I know about magnet beds and I do want to convert mine at some point later. This glass was already showing sings of damage, so I had it coming

Also belueve you or not, but this is ABS, just made with a special formula by local manufacturer


r/3Dprinting • • 8h ago

Troubleshooting Help please!

Post image
40 Upvotes

So I printed this with my a1 and am overall very glad with the outcome however in the head you can see the lines very clear since the the surface is very flat from upscaling the model.
Any tricks on how to remove them with settings? Or a better way to turn/rotate the head model during printing.

Bambu a1
All Parts Are printed separate
Pla basic
0.16 optimal

Thx in advance


r/3Dprinting • • 3h ago

Project First Smart Rover build with an Arduino UNO Q inside. What would you change?

Thumbnail
gallery
9 Upvotes

Hi All — this is my first robotics build, still learning. 4WD rover, chassis and top shell printed in PETG on a Bambu P2S, built around an Arduino UNO Q with Modulino modules. The onboard camera runs a face detection brick from the Arduino App Lab, and puts text on the three LED matrices. The FPV feed goes to a web HUD on my phone with a Backbone controller.

I wrote up the whole workflow here: https://medium.com/@grissomscottt/pointing-ai-at-atoms-what-happens-when-you-combine-a-3d-printer-with-an-ai-powered-ide-538168a0450b

I posted the print files and assembly guide on MakerWorld: https://makerworld.com/en/models/3660880-project-argus-brutalist-fpv-rover

As of this morning I am tweaking the app in Arduino app lab...then I will post it on git. For people who've built rovers before — what's the next capability worth adding? Open to any/all ideas!


r/3Dprinting • • 23h ago

Troubleshooting Crazy asa bending

Thumbnail
gallery
316 Upvotes

This is fucking crazy anything i can do against it ?


r/3Dprinting • • 3h ago

Free Model Designed and printed a Pyramid Head wall lamp for my room

Thumbnail
gallery
8 Upvotes

Since I enjoyed the Silent Hill 2 remake so much, I decided to model and 3D print a Pyramid Head wall lamp for my room. Used some filler, primer, paint, and varnish to get that rusted metal look, and threw a smart LED bulb inside.

I put up the files for free on MakerWorld, so feel free to print your own and let me know how it went :)

What do you think about it and it's something you would have done different regarding painting?

https://makerworld.com/en/models/3664479-pyramid-head-wall-lamp-silent-hill-ambient-light#profileId-4206179


r/3Dprinting • • 1d ago

Print (model not provided) Full Zaku II Commander cosplay

1.1k Upvotes

r/3Dprinting • • 10h ago

Project Christmas Decoration – Minimalist Reindeer

Thumbnail
gallery
26 Upvotes

This time I've designed a new Christmas decoration in the form of a minimalist reindeer. Its simple, rounded shapes combined with distinctive antlers give it a clean and elegant appearance. 🎄

The model can be printed in any size to suit your preferences and complement your home decor.

✨ What do you think of this design? Do you like this minimalist approach to Christmas decorations? I'd be happy to hear your thoughts and any suggestions for future designs.


r/3Dprinting • • 17h ago

News This 3D Printer Has No Motors (no belts)! The Engineering Behind the LightMake L4

Thumbnail
youtube.com
75 Upvotes

just found this video , looks like some pretty cool tech


r/3Dprinting • • 1h ago

News My first Raptor Pro Max scan :)

Thumbnail
gallery
4 Upvotes

Finally got to test the new Creality Raptor Pro MAX today. with it I finally managed to scan the side panels from my Honda VFR 750 RC36-2, which I been putting off for way too long.

Anyone who ever tried to reverse engineer glossy bike fairings knows how annoying that can get. Big curves, shiny paint,and zero room for drift if you want clean CAD data later. Usually it's a whole chore with matting spray, scanning one half,flipping it over, and hoping the merge doesn't ruin the geometry.

This time I didn't prep them at all except putting on some markers. No spray, no extra work, just hung the panel on a thin cord and went straight in with the blue laser.

And honestly it did the job in a single pass from both sides. No stress, no errors, no lost tracking, fast and super accurate.Having a scanner that handles a whole part like that without drama changes the pace in the garage big time.

Seriously awesome work. Can't wait to throw more parts at it and see what else it handles. One thing I know for sure—Creality gave us a real beast right before the holidays.