r/advancedGunpla • u/Special-Option-2196 • 35m ago
r/advancedGunpla • u/RoderickHossack • Apr 17 '25
Subreddit rules: Follow them or get permanently banned
I've had to add 3 new "do not post" rules since January. People keep crossing the line, I assume because the content in the sidebar no longer appears anywhere in most views on "new reddit." I will fix the problem soon, when I have time. In the meantime, here is a place to find our rules that you can't make up an excuse to have missed.
So no more warnings. It's too time-consuming. Play nice or get out forever.
Please do post:
Work in progressFinished kitsBuild/Paint GuidesTips and TricksProduct RecommendationsPart overhaulsCustom workIdeas and discussions
Please do not post the following:
Snapfit onlyLinks to kits for saleHaulsPolitical opinionsLewds/NSFWAI slop of any sortIrrelevant dramaFeedback about other subreddits
New rule:
Any comment in reply to a rule-breaking post risks permban by vicinity/association
If you read the above but are not sure where your post fits in, please stay on code. Note that questions are permitted under the discussions rule. And that the ban on AI slop includes using AI to write posts or comments. If what you write sounds like AI, you might get permbanned!
Examples:
F16 Tomcat? Not on code. A Macross VF in fighter mode? Super on code.
A warship? Not on code. A warship that carries mechs (White Base, Argama, etc.)? On code.
Humans? Not on code (except pilot minis). Humans in power or battle suits? It depends. Non-humans? It depends. Exodia is on code, but not Dark Magician.
Edit: I just had to permban a repeat offender I was foolish enough to let off with a warning previously. There will be no more consideration given, no grace, no more warnings. Violate one of our rules and you're gone forever. It doesn't matter how much history you have here.
Follow the damn rules. It's simple. Post things listed under Please do post and you're probably fine. Post anything under Please do not post and you're outta here. The only appeal is if the ban was mistaken and there was no rule violation.
r/advancedGunpla • u/RoderickHossack • Jan 10 '26
"Am I advanced enough to post here?" Yes.
The focus of this subreddit is to be a place for people who want to increase their skill at building Gundam models. We like other models, too, if they're similar in spirit. We're not excluding anyone, especially those who are beginners.
This is not a subreddit for advanced gunpla builders, it is a subreddit for advanced gunpla building. The craft itself, and the skill of executing the craft. At all levels.
We welcome posts of things you're trying to do with your gunpla build, but are bad at. Being bad is step 1 of getting good.
We welcome questions and discussion.
r/advancedGunpla • u/alice_1o1 • 8h ago
Added some decals!
Sorry for the lack of yuri, folks. Mostly freehanded the decals, didn’t feel like following the guide and disassembling the whole kit aside from the main shield
r/advancedGunpla • u/acherus27 • 21h ago
Zeta Gundam Bust custom build. this build was so good it made me want to build more bust kits.
This was commissioned long ago by a fellow redditor and since that time it made me want to build more gundam bust kits. sadly not alot of people like bust kits😆😆
r/advancedGunpla • u/pokedrawer • 15h ago
Wires will fit when nothing else will
Gonna twist the 5 wires into one and then connect it to the back of the head. Will clean up the connection points but gives the most amount of freedom. I'm gonna convert some feathers of a wing zero ew into filler hair then gonna focus back on the torso and beam saber in the knee gimmick.
r/advancedGunpla
•
u/WillingArachnid7538
•
19h ago
MG RX-78-2 Gundam (Ver. One Year War 0079) | Custom
r/advancedGunpla • u/guywithhuskys • 6h ago
Gradient painting
Just testing out gradient painting to get a better control of the airbrush, advice feedback welcomed. starting with white and gray but the actual colors I wanna try are blue gray or red orange
r/advancedGunpla • u/prinzeugn • 18h ago
Weird Flex, but OK (Psycho Gundam Mk2 cable mod)
I hate the original molded cables on the HGUC Psycho Gundam Mk II (they just... stop), so I decided to replace them with flexible cable. I thought it would be a pretty involved process... and it was. But it is already way more successful than I thought it would be, it only needs a bit of gap filling before painting.
Basically, I ripped out the molded-on cables, filled the gap that left with pla plate, then went back and drilled huge holes for the replacement cable with a rotary tool. The top of the cables are glued to the shoulder piece, which required a bit of reinforcement with more pla plate. Within the upper arm there is enough space to stash the extra cable to enable it to "feed out" when stretched.
The replacement cable is the core of a thinner power cable salvaged from a broken charger, with a sleeve from a different broken USB cable that was too thick. I also added little rings of plastic tube to help camouflage where the cable is glued at the top.
I'm hoping paint will stick okay-ish on the mesh cable, but I have backup plain black cables just in case. I'm gonna try to use Vallejo Mecha, it's almost like a latex paint (maybe it is, not a chemist) and a little stretchy.
r/advancedGunpla • u/KUROusagi112 • 10h ago
Does anyone here have experience with Infini or Ray studio scribers?
my Dspiae 0.15 mm scriber fell down head first and broke off, so imma need a new one.
r/advancedGunpla • u/Mistacher • 2h ago
Custom color
Naprawdę chcę stworzyć niestandardowy nóż, malując go na czarno i szaro, a potem matując, ale martwię się, że będą widoczne pociągnięcia pędzla, nie stać mnie na aerograf. I want to use vallejo and citadel paints since I used them on tabletop models before.
r/advancedGunpla • u/Gja11arhorn • 17h ago
In ERA+ Nemesis lower body completed!
Here are some updated pictures of the completed lower body of the in era + nemesis. I am loving how this kid is turning out.
I definitely have some complaints though. Some joints are very very tight. I definitely recommend lightly sanding the major connections.
On the plus side, I don’t know how they engineered their waterslides, but they are the best I have ever worked with
r/advancedGunpla • u/Neat-Comparison1218 • 1d ago
Better shots of the (not) Broken (anymore) Delta Plus
I set up the photo ring for the first time in ages and finally found a decent pose — I think the massive legs and ball joint hips make posing it kind of janky.
I don't think I mentioned before that I swapped out the flimsy MG hands for some recently reprinted MG build option hands. The weapon holding hand has had a pla-plate peg installed to fit the gun securely.
I feel I want to try some other Master Grades the YouTubers hate. What's a MG that needs love, do you think?
r/advancedGunpla • u/Pleasant-League-2124 • 12h ago
Tool Recommendation
I am a gunpla novice trying to dip my toes into customizing. I wanted to add some effect parts from the Transient Gundam Glacier by taking the [I believe the term would be peg] pegs on the effect parts and inserting them into a cut out incision I would make on the parts of the kitbashed gunpla I want to make. Or said another way: Cutting out places in the plastic of the base gunpla that match the pegs of the transient gundam glacier so they can be neatly inserted.
My question is what tool would you recommend for making the incisions/cut out on the base gunpla parts?
Thank you for your help!
r/advancedGunpla • u/gudore • 17h ago
Conflicted over workflow
I wanted to get your opinion on how you guys divide up a kit, especially a bigger more expensive one. For context, my Fenrir is coming in two weeks and I’m super excited to get started on it. I’m not working with an airbrush, I’m using Tamiya liner, and gloss+matte coats. Should I assemble then gloss, line, then matte.
Or, do I leave it on the runner, skip gloss, just line, assemble, then matte? I’m primarily worried about the lining corroding the plastic especially in areas where I might miss with the gloss coat. In the case that I leave the pieces on the runner and lining, I’m conflicted over which pieces to line without assembling it first to get an idea of the overall build.
In the near future, I will be upgrading to airbrushing my builds, in which case does the workflow change drastically?
I’m probably over tweaking over this, and I should just get to building but the next couple builds in my backlog are on the pricier side, I don’t want to accidentally damage them.
r/advancedGunpla • u/ninjastarforcex • 1d ago
RG 00 Qan[T] Dark Matter - A Gunpla that you can't buy
Paint & Tools used:
- SF288 Mr.Finishing Surfacer Black
- GX218 Graphite Black (main color)
- GX215 Metal Bloody Red (main color)
- C61 Burnt Iron (weapon)
- GX2 Ueno Black (base for Silver)
- GAIA 121 Star Bright Silver (base for Clear Orange)
- GX106 Clear Orange ("orbs", swords, head camera)
- GX100 Super Clear III Gloss
- MKM-02 DSPIAE Metallic Silver (replacement for some metallic stickers that I fucked up)
Transamsphere 3rd party water slide decals for Full Saber.
- Extremely good quality (sturdy, 5 sec wait time after dipping) , but I wish they had original design like G-Rework ver.
My very first RG and honestly I don't really like it. pre-build inner frame sucks. there are too many parts and they are way too small and annoying to deal with that I skipped painting the inner frame altogether. The overall build is very nice except the V-fin, which is extremely loose and I had to use double tape to make it not fall off easily.
Decals don't look good on top of clear orange parts at all, so I applied it on the other side of each limb instead. These decals were supposed to be applied UNDER the clear parts, but it sucks that I can't actually paint clear green parts to make it clear orange, so I decided to just candy paint it. And here I also found out that candy tone on flat surfaced parts doesn't actually work, huh? the swords almost have no reflective shine at all.
In the end, I'm very satisfied with the result and I didn't make much mistakes in the process. It looks really good that I'm considering buying MGSD 00 Raiser to make it Dark Matter too. but I probably won't. BB Senshi >>>>>> MGSD sorry no sorry.
r/advancedGunpla • u/pokedrawer • 1d ago
Dealing with deep scratches
For anyone who needs help filling scratches or what not
r/advancedGunpla • u/jimbacon04 • 1d ago
Any tips for first time painting?
Trying my first time on a complete paint custom with dspiae markers. Any tips moving forward? I also tried using a primer (hand brushed) on some parts and it leaves strokes/smudges, should I drop using primers or keep at it?
r/advancedGunpla • u/pokedrawer • 1d ago
This took hours
Waiting on some parts in the mail, started processing the hair and shoulder armor. Ended up getting a second one as well, want to bash it with some wfm and see how that works out.
r/advancedGunpla • u/awesome_zman • 1d ago
I’ve gone over these with a sprue glue crayon several times to fill in these seam lines and I’m still getting marks. Is there anything I can do, or should I just take the L and continue to decals?
r/advancedGunpla • u/its_cienna014 • 2d ago
QZN-00 GUNDAM QUASAR (Zero Nova)😊
it's a quite an odd combination, yah!? 🤔😁
Modding and detailing are done. next up! painting! let's see how it turns out, hoping to finish this with in 10 days 😅
I call it "QZN-00 GUNDAM QUASAR (Zero Nova) 😁
00 QanT + Eclipse + Astray + Etc 😁
(customization,kitbashing,modification,scratch building)
r/advancedGunpla • u/alice_1o1 • 2d ago
Full armor narrative finally done
Lots of tamiya clear lacquer spray later, and the beast is complete. Super fun project and I think it turned out great, I learned a lot, and I love the final product
r/advancedGunpla • u/MinnesotaMandalorian • 1d ago
Looking for helpful tip/tool
I am having an issue with a special coating kit and some of the peg and socket pieces are super tight and binding while trying to put them together. Which tool would be best for sanding those down as regular foam sanding straps don't work and regular sand paper isn't registered enough.
r/advancedGunpla • u/bigboj55555 • 1d ago
Looking for some tool suggestions
So i saw some gunpla customization on ig and i have the itch again after like 20 years. Lol i have to admit you guys have advances the hobby way farther than i thought., i remember when the hobby was giddy over the max technique.Can you guys suggest some tools for me. Im looking for markers, a vice, paint markers, nippers, hobby knife ,those measured tape strips,cement, glass file .also what is the best place to buy kits right now. Im also looking for some older kits. (Maxter and alex to be specific). Thank you for any suggestions
r/advancedGunpla • u/PeasForLunch • 1d ago
Hobby saw recommendations?
Just a quick question, i have some bashing to do and nothing to seriously cut plastic with, so i wanted to ask about tools. Was eyeing a tamiya hobby saw and have seen tons of marketing for powered saws, what do people like?