I attended a class at my local hobby shop. AK oils is what we used. I didn't get to finish it within the time frame of the class. Used what I've mentally accumulated from many videos I've seen and magazines I've read on how they do it.
I didn't use the usual cotton swab technique to clean it up, just added a bit more thinner to my brush and pushed the pigments around. Something that was really fun and awesome about the oils.
I recently picked up 3 Gundam artifacts (2 bandai + 1 resin garage kit). The resin GK is cleaned up ready to assemble, 1 Gundam artifact is assembling, and 1 backlog.
I've already bought a bunch of Mr. Hobby Aqueous, following the color guide in the Ver Ka Sazabi Manual. and planning to get a Mr. Surfacer 1000 too.
I've viewed many videos of people hand brush painting it, but I'm still hesitant on starting it. I'd really appreciate some pointers from experienced builders on a few things:
1. Color selection and mixing
Do you usually mix custom colors or just use paints straight out of the bottle?
My original plan is to follow the color guide in the manual, but there's a lot of paint mixing there, and its giving me some anxiety since it adds extra complexity for a beginner.
So far I've only gotten colors for Sazabi, while the other two kits still haven't bought anything yet.
And I’d like to avoid the rough/thick texture seen in builds like this (not trying to knock anyone's work, just trying to learn*):*
White and grey part has blots, and blue parts is not uniform (https://www.youtube.com/shorts/vQ8tM3ONj7A)
What usually causes this kind of finish, and what should I focus on to get closer to the first two examples?
3. Resin GK preparation
Since one of my kits is a resin garage kit, is there anything extra I need to do before painting? I've sanded the nubs, and did a quick swirl with dish soap.
I want to make sure the Aqueous paint works and also the kits won't break.
4. Assembly vs. painting order
For tiny kits like Gundam Artifacts and resin GK, Do you assemble first then paint? Or paint first then assemble? Or partially assemble it then paint? I plan to melt the seam lines using thin cement, but it seems like going to be hard to paint the inner side later.
I’m very late to the Peter Cullen tribute from r/Gunpla because I’m slow and life is hectic, but still wanted to post this. Like much of you all he was a HUGE part of my childhood and inspiration for a lot of my creativity.
The build is taken from a Powered GM HG, which I got for free and wasn’t going to build until this subs request for a Peter Cullen tribute. It seemed bulky enough to fill out Primes proportions, but the more I looked at it the more I wanted to fix the head and gun because it would’ve thrown off the look a lot.
For the head I had a spare head for the RX-78-2 Revive HG’s head, so to make the faceplate fit I sanded the front down and cut off the bottom and it’s perfectly held in place by the tension of the helmet. I cut off the inner forehead thingy of the original and shoved it in the helmet to fill in the forehead hole. I also cut the V in two from the 78-2 and sanded down the edges and cemented them to the sides of the helmet.
For the gun, it was my first time doing that many mods (and I’m really proud of it!) I cut/scribed the barrel off the the bazooka and cemented it to the front of the rifle. I was gonna leave it like that at first to get the hand canon look, but decided to scribe off the tip to shorten it, messily scribed the middle of the barrel and sanded it to get some detail, and then scribed/cut off the stock and top of the gun, replacing the top with pla plates to give it definition and the stock with the very end of the butt. Additionally I took the handle from the bazooka + the original rifle barrel cemented them in front of the trigger.
Very happy with how it turned out. Hope I did the man proud.
Naprawdę chcę stworzyć niestandardowy nóż, malując go na czarno i szaro, a potem matując, ale martwię się, że będą widoczne pociągnięcia pędzla, nie stać mnie na aerograf. I want to use vallejo and citadel paints since I used them on tabletop models before.
Just testing out gradient painting to get a better control of the airbrush, advice feedback welcomed. starting with white and gray but the actual colors I wanna try are blue gray or red orange
Sorry for the lack of yuri, folks. Mostly freehanded the decals, didn’t feel like following the guide and disassembling the whole kit aside from the main shield
I am a gunpla novice trying to dip my toes into customizing. I wanted to add some effect parts from the Transient Gundam Glacier by taking the [I believe the term would be peg] pegs on the effect parts and inserting them into a cut out incision I would make on the parts of the kitbashed gunpla I want to make. Or said another way: Cutting out places in the plastic of the base gunpla that match the pegs of the transient gundam glacier so they can be neatly inserted.
My question is what tool would you recommend for making the incisions/cut out on the base gunpla parts?
Gonna twist the 5 wires into one and then connect it to the back of the head. Will clean up the connection points but gives the most amount of freedom. I'm gonna convert some feathers of a wing zero ew into filler hair then gonna focus back on the torso and beam saber in the knee gimmick.
I wanted to get your opinion on how you guys divide up a kit, especially a bigger more expensive one. For context, my Fenrir is coming in two weeks and I’m super excited to get started on it. I’m not working with an airbrush, I’m using Tamiya liner, and gloss+matte coats. Should I assemble then gloss, line, then matte.
Or, do I leave it on the runner, skip gloss, just line, assemble, then matte? I’m primarily worried about the lining corroding the plastic especially in areas where I might miss with the gloss coat. In the case that I leave the pieces on the runner and lining, I’m conflicted over which pieces to line without assembling it first to get an idea of the overall build.
In the near future, I will be upgrading to airbrushing my builds, in which case does the workflow change drastically?
I’m probably over tweaking over this, and I should just get to building but the next couple builds in my backlog are on the pricier side, I don’t want to accidentally damage them.
Here are some updated pictures of the completed lower body of the in era + nemesis. I am loving how this kid is turning out. I definitely have some complaints though. Some joints are very very tight. I definitely recommend lightly sanding the major connections. On the plus side, I don’t know how they engineered their waterslides, but they are the best I have ever worked with
I hate the original molded cables on the HGUC Psycho Gundam Mk II (they just... stop), so I decided to replace them with flexible cable. I thought it would be a pretty involved process... and it was. But it is already way more successful than I thought it would be, it only needs a bit of gap filling before painting.
Basically, I ripped out the molded-on cables, filled the gap that left with pla plate, then went back and drilled huge holes for the replacement cable with a rotary tool. The top of the cables are glued to the shoulder piece, which required a bit of reinforcement with more pla plate. Within the upper arm there is enough space to stash the extra cable to enable it to "feed out" when stretched.
The replacement cable is the core of a thinner power cable salvaged from a broken charger, with a sleeve from a different broken USB cable that was too thick. I also added little rings of plastic tube to help camouflage where the cable is glued at the top.
I'm hoping paint will stick okay-ish on the mesh cable, but I have backup plain black cables just in case. I'm gonna try to use Vallejo Mecha, it's almost like a latex paint (maybe it is, not a chemist) and a little stretchy.
This was commissioned long ago by a fellow redditor and since that time it made me want to build more gundam bust kits. sadly not alot of people like bust kits😆😆
I set up the photo ring for the first time in ages and finally found a decent pose — I think the massive legs and ball joint hips make posing it kind of janky.
I don't think I mentioned before that I swapped out the flimsy MG hands for some recently reprinted MG build option hands. The weapon holding hand has had a pla-plate peg installed to fit the gun securely.
I feel I want to try some other Master Grades the YouTubers hate. What's a MG that needs love, do you think?
Trying my first time on a complete paint custom with dspiae markers. Any tips moving forward? I also tried using a primer (hand brushed) on some parts and it leaves strokes/smudges, should I drop using primers or keep at it?
GAIA 121 Star Bright Silver (base for Clear Orange)
GX106 Clear Orange ("orbs", swords, head camera)
GX100 Super Clear III Gloss
MKM-02 DSPIAE Metallic Silver (replacement for some metallic stickers that I fucked up)
Transamsphere 3rd party water slide decals for Full Saber.
Extremely good quality (sturdy, 5 sec wait time after dipping) , but I wish they had original design like G-Rework ver.
My very first RG and honestly I don't really like it. pre-build inner frame sucks. there are too many parts and they are way too small and annoying to deal with that I skipped painting the inner frame altogether. The overall build is very nice except the V-fin, which is extremely loose and I had to use double tape to make it not fall off easily.
Decals don't look good on top of clear orange parts at all, so I applied it on the other side of each limb instead. These decals were supposed to be applied UNDER the clear parts, but it sucks that I can't actually paint clear green parts to make it clear orange, so I decided to just candy paint it. And here I also found out that candy tone on flat surfaced parts doesn't actually work, huh? the swords almost have no reflective shine at all.
In the end, I'm very satisfied with the result and I didn't make much mistakes in the process. It looks really good that I'm considering buying MGSD 00 Raiser to make it Dark Matter too. but I probably won't. BB Senshi >>>>>> MGSD sorry no sorry.
I am having an issue with a special coating kit and some of the peg and socket pieces are super tight and binding while trying to put them together. Which tool would be best for sanding those down as regular foam sanding straps don't work and regular sand paper isn't registered enough.
So i saw some gunpla customization on ig and i have the itch again after like 20 years. Lol i have to admit you guys have advances the hobby way farther than i thought., i remember when the hobby was giddy over the max technique.Can you guys suggest some tools for me. Im looking for markers, a vice, paint markers, nippers, hobby knife ,those measured tape strips,cement, glass file .also what is the best place to buy kits right now. Im also looking for some older kits. (Maxter and alex to be specific). Thank you for any suggestions
Waiting on some parts in the mail, started processing the hair and shoulder armor. Ended up getting a second one as well, want to bash it with some wfm and see how that works out.
Just a quick question, i have some bashing to do and nothing to seriously cut plastic with, so i wanted to ask about tools. Was eyeing a tamiya hobby saw and have seen tons of marketing for powered saws, what do people like?
Lots of tamiya clear lacquer spray later, and the beast is complete. Super fun project and I think it turned out great, I learned a lot, and I love the final product