r/advancedGunpla • • 19h ago

Tool Recommendation

Post image
4 Upvotes

I am a gunpla novice trying to dip my toes into customizing. I wanted to add some effect parts from the Transient Gundam Glacier by taking the [I believe the term would be peg] pegs on the effect parts and inserting them into a cut out incision I would make on the parts of the kitbashed gunpla I want to make. Or said another way: Cutting out places in the plastic of the base gunpla that match the pegs of the transient gundam glacier so they can be neatly inserted.

My question is what tool would you recommend for making the incisions/cut out on the base gunpla parts?

Thank you for your help!


r/advancedGunpla • • 7h ago

🕷️

Post image
116 Upvotes

r/advancedGunpla • • 1h ago

Thank You, Peter Cullen

Thumbnail
gallery
44 Upvotes

I’m very late to the Peter Cullen tribute from r/Gunpla because I’m slow and life is hectic, but still wanted to post this. Like much of you all he was a HUGE part of my childhood and inspiration for a lot of my creativity.

The build is taken from a Powered GM HG, which I got for free and wasn’t going to build until this subs request for a Peter Cullen tribute. It seemed bulky enough to fill out Primes proportions, but the more I looked at it the more I wanted to fix the head and gun because it would’ve thrown off the look a lot.

For the head I had a spare head for the RX-78-2 Revive HG’s head, so to make the faceplate fit I sanded the front down and cut off the bottom and it’s perfectly held in place by the tension of the helmet. I cut off the inner forehead thingy of the original and shoved it in the helmet to fill in the forehead hole. I also cut the V in two from the 78-2 and sanded down the edges and cemented them to the sides of the helmet.

For the gun, it was my first time doing that many mods (and I’m really proud of it!) I cut/scribed the barrel off the the bazooka and cemented it to the front of the rifle. I was gonna leave it like that at first to get the hand canon look, but decided to scribe off the tip to shorten it, messily scribed the middle of the barrel and sanded it to get some detail, and then scribed/cut off the stock and top of the gun, replacing the top with pla plates to give it definition and the stock with the very end of the butt. Additionally I took the handle from the bazooka + the original rifle barrel cemented them in front of the trigger.

Very happy with how it turned out. Hope I did the man proud.


r/advancedGunpla • • 15h ago

Added some decals!

Thumbnail
gallery
36 Upvotes

Sorry for the lack of yuri, folks. Mostly freehanded the decals, didn’t feel like following the guide and disassembling the whole kit aside from the main shield


r/advancedGunpla • • 17h ago

Does anyone here have experience with Infini or Ray studio scribers?

Post image
14 Upvotes

my Dspiae 0.15 mm scriber fell down head first and broke off, so imma need a new one.


r/advancedGunpla • • 22h ago

Wires will fit when nothing else will

Thumbnail
gallery
90 Upvotes

Gonna twist the 5 wires into one and then connect it to the back of the head. Will clean up the connection points but gives the most amount of freedom. I'm gonna convert some feathers of a wing zero ew into filler hair then gonna focus back on the torso and beam saber in the knee gimmick.


r/advancedGunpla • • 23h ago

Conflicted over workflow

5 Upvotes

I wanted to get your opinion on how you guys divide up a kit, especially a bigger more expensive one. For context, my Fenrir is coming in two weeks and I’m super excited to get started on it. I’m not working with an airbrush, I’m using Tamiya liner, and gloss+matte coats. Should I assemble then gloss, line, then matte.

Or, do I leave it on the runner, skip gloss, just line, assemble, then matte? I’m primarily worried about the lining corroding the plastic especially in areas where I might miss with the gloss coat. In the case that I leave the pieces on the runner and lining, I’m conflicted over which pieces to line without assembling it first to get an idea of the overall build.

In the near future, I will be upgrading to airbrushing my builds, in which case does the workflow change drastically?

I’m probably over tweaking over this, and I should just get to building but the next couple builds in my backlog are on the pricier side, I don’t want to accidentally damage them.


r/advancedGunpla • • 9h ago

Custom color

2 Upvotes

Naprawdę chcę stworzyć niestandardowy nóż, malując go na czarno i szaro, a potem matując, ale martwię się, że będą widoczne pociągnięcia pędzla, nie stać mnie na aerograf. I want to use vallejo and citadel paints since I used them on tabletop models before.


r/advancedGunpla • • 13h ago

Gradient painting

Thumbnail
gallery
13 Upvotes

Just testing out gradient painting to get a better control of the airbrush, advice feedback welcomed. starting with white and gray but the actual colors I wanna try are blue gray or red orange