r/AerospaceEngineering • • 17h ago

Personal Projects Guys need your help

2 Upvotes

See i want to make a solid rocket motor it a K to L class rocket motor i am have very hard time deciding the parameters of outer casing and which material and thickness to chose can you guys help

Avg pressure = 556.65 psi

Peak pressure = 750 psi

Impulse = 2.4kN

Nozzle throat = 14 mm

Exit diameter = 30 mm

Converging half angle 50 deg

Diverging half = 11 deg

Total length 500 mm

First 150 mm from Nozzle finocyl with 17 mm core and 4 fins

Rest 350 mm bates with 17 mm core

And outer diameter is 46 mm for fuel grains

Fuel is smiler to cherry limeade

I Follower metric system.


r/AerospaceEngineering • • 4h ago

Other Electronic recovery.

Post image
0 Upvotes

I'll be utilizing the ESP-32 board, atmospheric pressure sensor, 9v batterie and a servo.

3D printed components should be finished in the morning. If everything works out, i will place the recovery hardware on cults3d.

\#Sheltechllc #SpaceX #experimentalrocketry #Arduino #ESP32 #diy #arizona #Program #3dprinting #aerospace #electronics #aerospaceindustry #Servo #Custom #Science


r/AerospaceEngineering • • 23h ago

Personal Projects Good starter projects for drones

Thumbnail reddit.com
0 Upvotes

r/AerospaceEngineering • • 23h ago

Personal Projects Micro TurboJet Engine Build Help!

Thumbnail gallery
34 Upvotes

A few weeks ago I decided I wanted to build a turbojet engine for extremely cheap, the cheapest retail was about 1300$ with shipping and I thought to myself I could make a turbojet myself and learn how it works along the way. It’s been 2 weeks since then and it’s been a hell of a journey I used AI for almost every aspect of this teaching me CFD, making some of the models for me and helping me test the efficiency. I would say it’s a lot easier when there’s a bot explaining everything like I’m a 4th grader but still I don’t know if I want to chuck 250$ in a cnc company to make the parts for me, invest in my own cnc machine or manufacture all the parts the old fashioned way. I have a 3d printer I was going to run some cold gas tests with and check the thrust without any real combustion going on and I’m looking at the kp35 impeller as it’s the right size for my project and it’s fairly cheap at around 30$ and factory balanced! What are your thoughts?? I also accounted for the bearings which will be a pain in the ass to find if you have any suggestions please drop them below!!


r/AerospaceEngineering • • 12h ago

Meta Resources to learn about how airplanes operate?

Thumbnail reddit.com
3 Upvotes

r/AerospaceEngineering • • 9h ago

Discussion Catia 3d experience vs nx simens

4 Upvotes

I’m doing my bachelors in aerospace engineering and I’m in my second year. Which of the two cad softwares do I get familiar with? My aerospace design courses already teach us how to use catia v5. I’ve mentioned 3d experience instead because I want to practice on the software from home than having to go to the labs. Lastly, I’ve included nx simens mainly because it seems easier to get the associate certification from, as well as I’ve heard bormbardier (employer in my city) is transitioning to use nx simens. Although, many aerospace employers in my city still use catia v5.