r/AerospaceEngineering • • 10m ago

Discussion Can someone self study aerospace engineering? If so what are the resources

1 Upvotes

I know of OSSU for computer science. Is there something equivalent for aerospace engineering and is it even possible for someone to self study ae with no degree???


r/AerospaceEngineering • • 5h ago

Other Electronic recovery.

Post image
0 Upvotes

I'll be utilizing the ESP-32 board, atmospheric pressure sensor, 9v batterie and a servo.

3D printed components should be finished in the morning. If everything works out, i will place the recovery hardware on cults3d.

\#Sheltechllc #SpaceX #experimentalrocketry #Arduino #ESP32 #diy #arizona #Program #3dprinting #aerospace #electronics #aerospaceindustry #Servo #Custom #Science


r/AerospaceEngineering • • 9h ago

Discussion The switch from Ink and Mylar to CAD

9 Upvotes

So for you older folks, what experiences did you have with CAD when every CAD system was vying for leadership in aerospace?

I started at Boeing Wichita learning the Gerber IDS, a 2.5D system. Switched to Beech where I had to learn CADAM and Catia V3 I think. Then moved to Learjet and learned the original Unigraphics. I then moved to California and Northrop where it was CADAM and Catia V3, and Northrop developed NCAD and their lofting system NCAL. Then went to General Dynamics Space and went back on the drafting board and pencil on paper layouts that drafters then input into the CADDS 3X and 4X system. They then let the design engineers use CADDS 4X and 5X.
They then moved to Denver and for the Atlas III they started with (I think was the IDEAS system, but not sure) a CAD system the spacecraft people were using. It was unstable with the ellipsoidal bulkheads of the Atlas and after 6 months we were behind schedule by 6 months. ProEngineer came in with a good deal and we started over with ProE v12 or v13. In 6 months we were back on schedule, having made up the 6 months and met the 1 year date on schedule. That is when I also learned Mechanica. Transferred to Marietta GA and picked up Catia again, V4 now and the switch to V5. And ended my career on 3DS.
While in Denver, they decided instead of redrawing all the old pen and ink drawings into CAD, they would just scan them using a raster scanner. Boy what a mess it was when we had to do drawing revisions, removing the ragged raster images and replacing them with straight or curved lines.

So what systems have you used?


r/AerospaceEngineering • • 11h ago

Discussion Catia 3d experience vs nx simens

4 Upvotes

I’m doing my bachelors in aerospace engineering and I’m in my second year. Which of the two cad softwares do I get familiar with? My aerospace design courses already teach us how to use catia v5. I’ve mentioned 3d experience instead because I want to practice on the software from home than having to go to the labs. Lastly, I’ve included nx simens mainly because it seems easier to get the associate certification from, as well as I’ve heard bormbardier (employer in my city) is transitioning to use nx simens. Although, many aerospace employers in my city still use catia v5.


r/AerospaceEngineering • • 13h ago

Meta Resources to learn about how airplanes operate?

Thumbnail reddit.com
3 Upvotes

r/AerospaceEngineering • • 19h ago

Personal Projects Guys need your help

2 Upvotes

See i want to make a solid rocket motor it a K to L class rocket motor i am have very hard time deciding the parameters of outer casing and which material and thickness to chose can you guys help

Avg pressure = 556.65 psi

Peak pressure = 750 psi

Impulse = 2.4kN

Nozzle throat = 14 mm

Exit diameter = 30 mm

Converging half angle 50 deg

Diverging half = 11 deg

Total length 500 mm

First 150 mm from Nozzle finocyl with 17 mm core and 4 fins

Rest 350 mm bates with 17 mm core

And outer diameter is 46 mm for fuel grains

Fuel is smiler to cherry limeade

I Follower metric system.


r/AerospaceEngineering • • 1d ago

Personal Projects Micro TurboJet Engine Build Help!

Thumbnail gallery
35 Upvotes

A few weeks ago I decided I wanted to build a turbojet engine for extremely cheap, the cheapest retail was about 1300$ with shipping and I thought to myself I could make a turbojet myself and learn how it works along the way. It’s been 2 weeks since then and it’s been a hell of a journey I used AI for almost every aspect of this teaching me CFD, making some of the models for me and helping me test the efficiency. I would say it’s a lot easier when there’s a bot explaining everything like I’m a 4th grader but still I don’t know if I want to chuck 250$ in a cnc company to make the parts for me, invest in my own cnc machine or manufacture all the parts the old fashioned way. I have a 3d printer I was going to run some cold gas tests with and check the thrust without any real combustion going on and I’m looking at the kp35 impeller as it’s the right size for my project and it’s fairly cheap at around 30$ and factory balanced! What are your thoughts?? I also accounted for the bearings which will be a pain in the ass to find if you have any suggestions please drop them below!!


r/AerospaceEngineering • • 1d ago

Personal Projects Good starter projects for drones

Thumbnail reddit.com
0 Upvotes

r/AerospaceEngineering • • 1d ago

Personal Projects How should a lifting surface model handle drag forces at extreme AoA?

Thumbnail reddit.com
0 Upvotes

r/AerospaceEngineering • • 1d ago

Other Exploring the Future of Aerospace Engineering!

3 Upvotes

The World Conference on Aerospace and Aeronautical Engineering (WCAAE-2027) will take place on March 18–20, 2027, in Osaka, Japan.

The conference focuses on aerospace innovation, aircraft technology, aerodynamics, aviation research, and emerging engineering developments.

What are the most exciting emerging technologies shaping the future of aerospace engineering?

Let's discuss! ✈️

#Aerospace #AeronauticalEngineering #WCAAE2027


r/AerospaceEngineering • • 2d ago

Personal Projects Concept of a spacecraft and airship that combines fish-like propulsion and electrostatic charge modulation

225 Upvotes

This is idea of spacecraft and airship based on my experimental and theoretical research. This ship combines fish-like vortex propulsion  and modulation of electrostatic charge on the body which ionizes the air and create jet thrust in space by pushing off from charged plasma particles. This is based on effects such as vortex collapse and charge trace lag, which can produce a directional impulse. Thus, the same principle of combining hydrodynamics and electrodynamics makes the ship universal, allowing it to travel underwater and in interstellar space changing only the internal pressure and frequency.

This still needs some work, and I would appreciate any feedback:

https://doi.org/10.5281/zenodo.24371995

Here's you also can find simulations code:

https://github.com/MasterOgon/Aeroacoustic-Flying-Saucer-Oscillating-Resonator-CFD-Simulation-LBM-/tree/main


r/AerospaceEngineering • • 2d ago

Discussion what are the best simulations apps

5 Upvotes

about simulations apps for the rocketry what are the best to build a detection and lunch system for a rocket ( part electronic ) from your point of view


r/AerospaceEngineering • • 4d ago

Personal Projects I'm 16 and want to learn rocketry

40 Upvotes

So, I have been fascinated about space, rockets and robots since childhood. And now I want to build a reusable rocket jist like spacex (obusly not big like starship and not that advanced) but I want to build a small - medium size rocket which can even land on itself. But I am confused about where I should start and what to learn. Also I am just 16 (turning 17 next month) so I don't know high end rocket science.

I know some of the basic things like python, c++, 3d designing (CAD), PCB designing, work with electronics (esp32, Arduino, and a couple of sensors), basics of AI/ML (started learning to build tiny ml models), basic algebra (little more than school) and yeah only this much.

Btw, currently planning to build a flight controller.

I know this is not enough but I want to learn more stuff and build the rocket.

So, any recommendations for resources, advice, course or anything. Even your little advice will help me.

Thanks for reading.


r/AerospaceEngineering • • 4d ago

Media Towards accurate aerodynamics models for wing icing

Thumbnail youtu.be
13 Upvotes

r/AerospaceEngineering • • 5d ago

Discussion Back-of-envelope battery numbers for COMAC's CE-25A (10 t, 19 seat, 300 km/h, 400 km claimed). Does 400 km close?

Post image
53 Upvotes

COMAC flew the CE-25A with a crew for the first time on 14 Nov. They quote 10 t MTOW, 300 km/h cruise at 2,400 m and 400 km range, but nothing on the battery. I tried to work back to the pack and would welcome critique of the assumptions. (I'm coming from an automotive and battery design background, aero is only a hobby)

Method: P_batt = m·g·v / ((L/D)·η_p·η_elec), with η_elec = 0.93. Instead of guessing L/D, I back-calculated (L/D)·η_p from published cruise fuel flow and assumed PSFC for some turboprops:

  • Beech 1900D: ~10.2
  • Twin Otter: ~6.1
  • Do 228NG: ~7.8
  • ATR 42-600S: ~12.0
  • Velis Electro (from its published 35 kW cruise): ~7.8

Using 9 to 13 for the CE-25A gives 680 to 980 kW in cruise, so about 800 kW central and about 2.7 kWh/km.

That means:

  • 400 km of cruise alone is about 1,070 kWh, plus about 120 kWh for take-off and climb, with 90% of the pack usable.
  • At 350 Wh/kg pack level, 400 km with no reserve needs 32 to 45% of MTOW as battery. With a 30 min reserve it's 43 to 61%.
  • At a 30% battery fraction and 350 Wh/kg, I get about 100 to 215 km with a 30 min reserve.

For comparison, the packs with published mass (Alice, Velis, X-57, Alia CX300) sit at 170 to 220 Wh/kg. CATL's condensed cell is claimed at up to 500 Wh/kg at cell level, but nothing is published at pack level.

The weakest assumptions are probably η_p for small ducted fans and the 25 to 35% battery mass budget. Interested in views from anyone who has worked on DEP or ducted-fan efficiency at this speed.

Full write-up with charts and sources (disclosure: it's my site): https://www.batterydesign.net/comac-ce-25a-electric-aircraft/


r/AerospaceEngineering • • 5d ago

Discussion Advice for affordable/free computational resources for 3D CFD simulations (SITVC research)

Thumbnail reddit.com
4 Upvotes

r/AerospaceEngineering • • 6d ago

Discussion Looking for guidance on a Spaceflight Mechanics project

Thumbnail reddit.com
1 Upvotes

r/AerospaceEngineering • • 6d ago

Discussion Paris Air show o IAC?

Thumbnail reddit.com
1 Upvotes

Paris Air show o IAC?

Parto con il dire che sono assolutamente ignorante in materia, per questo vorrei un consiglio sincero ed onesto su chi ci è già stato o comunque conosce qualcuno che ci è andato.

Vorrei fare un regalo al mio ragazzo per i suoi 25 anni che sta finendo la magistrale nel settore spazio. Lui non ci è mai stato a un festival nel settore aereospaziale, per questo mi sono informata su dei festival internazionali in materia, ovvero il Paris Air Show 2027 che si dovrebbe tenere tra il 14 e il 20 giugno e l'Iac International Austronautical Congress a Poznan in Polonia, che si terrà tra il 27 settembre e il 1 ottobre 2027. Mi sono un po' informata e il Paris Air Show, il biglietto è più economico e se ci vai il venerdì ci dovrebbe essere la giornata studenti che registrandoti dovresti avere uno sconto, e c'è la possibilità di partecipare a incontri di orientamento e carriera con grandi aziende del settore (avrei la possibilità di accompagnarlo il weekend); essendo a Parigi sarebbe anche carino visitare un po' anche la città. Per L'IAC invece il pass completo studenti costerebbe 200-350€ che vale tutti e 5 i giorni (il pass per un solo giorno costerebbe dai 400€ e non prevede sconti studenti) avrei la possibilità di accompagnarlo solo l'ultimo giorno.

Detto questo vorrei avere un parere onesto ed eventualmente se non consigliate nessuna delle due fiere, quali consigliereste, possibilmente sempre nel range europeo. Grazie


r/AerospaceEngineering • • 7d ago

Personal Projects What projects can i do if i want to become a space propulsion engineer?

9 Upvotes

Some context: I am 15, 9th grade, so far i built a small 3d printed satelite that has a few arudino modules. Now i am working on a cold gas RCS system just for stabilization. After this i really dont know what to build next since im not allowed to make solid fuel rockets...

I am thinking to make an EDF powerd "rocket". In my head it seems very complicated especially since im tight on budget and one crash could ruin the whole project, in my head i want it to steer with some fins bellow the engine and when landing to pop some airbrakes to help with stabilization. I doubt i will be able to make this so im here to get some sugestions for projects.


r/AerospaceEngineering • • 7d ago

Personal Projects Author Question: on the love of planes

Post image
930 Upvotes

I hope this is ok to post*

I'm writing a story wherein the protagonist is an engineer/technician on planes (one in particular) during and after WW1.

I really want to sell the passion you all have for your craft; so I would love some stories about how you might personalise a plane, how you feel about your "baby", urban legends, inside jokes etc. Sort of inspired by the attached image.

Bonus points for any old stories you know of the same type from the time period I'm writing in.

Thanks 🥰

(* P.S I'm a writer with a degree and a few published works, pitching for a publisher. I'm not a teenager doing homework, so I hope this isn't violating the terms of the sub, or in any way disrespectful to it)


r/AerospaceEngineering • • 7d ago

Career my first internship search is over!

Post image
452 Upvotes

for reference, I’m a college sophomore targeting propulsion engineering at space companies. I have no prior work experience, and attend a large public university. happy to answer any questions!


r/AerospaceEngineering • • 8d ago

Cool Stuff IS MY REUSABLE SOLID BOOSTER(1st Stage) CONCEPT ANY GOOD???

Post image
0 Upvotes

Im just a student of materials engineering still in my first college year, but i've been a space enthusiastic from a really early phase of my life, kind of collecting non-formal knowledge, enough to imagine, but not to enlighten myself of reality.
Normally i would just forget my (probably) engineering delusions, but i got really attached to this one, and i want to know if there's any solidity to the concept.

(Also im sorry if my text is any cofusing, english isn't my first language)


r/AerospaceEngineering • • 8d ago

Discussion Engineerings! what are your views upon the upcoming F-47 Fighter-jet?

0 Upvotes

I'd be happy to discuss about the design and engine. Do you really think it's going to be a game changer in the industry? let me know your views upon this!