r/AnalogCommunity • • 29m ago

Troubleshooting - Gear Finally figured out how to fix exposure compensation on Canon Elan 7e

0 Upvotes

Half press shutter, turn quick dial on the back.

So easy to do, I probably did it by accident, which is how I ended up at PLUS f**"ing 2 for half a roll without noticing.

I was hitting a wall trying to fix this for a while, because you can set exposure BRACKETING in a way that makes sense, but the base value itself would be off by a little bit and I could find no way to change it that made any sense.


r/AnalogCommunity • • 38m ago

Scanning Introducing TetherInvert: A free and open-source app tailored on automatic tethered trichromatic scanning for a rapid workflow

Post image
0 Upvotes

Hi r/AnalogCommunity,

Today I want to introduce a free app I have been working on for the last two months. TetherInvert is another scanning and inversion solution, focused on tethered and trichromatic canning and currently built around the open-source Scanlight by jackw01. Of course you can use other lights in a manual mode as well, and single RGB channel scanning is not a must.
I plan to support more controllable lights in the future when they offer an open API.
The core of this app is speed and efficiency: from calibration, custom metadata and scanning to the contact sheet in around 20 minutes. This is also why the app is tailored to tethered scanning, and I really encourage you to use it in this mode.

Website: https://tetherinvert.com

Manual: https://tetherinvert.com/manual/

Github Repository: https://github.com/janpfischer/tetherinvert

This post is formost not a advertisment, but a call for help to test because it is tightly connected to hardware. As I only have one digital camera I can only test Sony. So tests with other brands would be highly appreciated. I do only have access to the Scanlight by jackw01, but if someone has access to the new CuteNewDesign RGB light I would be happy to integrate as well.

If you have any problems with your hardware please create a "Doctor" report from the help menu and submit the report via a Github issue or send it to me via PM on Reddit.

Main features:

- Tethered control of camera and Scanlight over USB: live view, RAW capture and download straight into the roll folder
- Calibration per film stock with a guided wizard and live histogram: LED level per color and one shared shutter speed, exposed to the right on the film base, stored as a preset
- Scan modes: trichromatic (three exposures under red, green and blue, merged and registered to a fraction of a pixel), RGB together in one shot, black and white under the white LED, or your own light in manual mode
- Flat-field correction per roll against uneven illumination
- Flat 16-bit TIFFs as the master for your own workflow, optionally also the linear negative
- Roll viewer: the roll as a strip next to the live view, hold TAB to peek at the last scan, 100% zoom
- Frontier-inspired corrections on the preview: density, C/M/Y, contrast, saturation, tone, Hold, "match the roll", with instant feedback and batch "printing"
- Frames numbered as on the film (00, 0, 1, …) and any frame rescannable in place
- Metadata per roll and frame (film, camera, lens, aperture, shutter, keywords, notes) written into every TIFF as XMP
- Contact sheet as A4 PDF and PNG with film rebate, edge print and sprocket holes including all important metadata
- Lightroom Classic plug-in that considers the roll folder as a hot folder
- Clipping check on every scan, so a knocked aperture ring does not go unnoticed

I am running a macOS machine and tested the Linux build with a VM running Fedora and Wayland and confirmed the working of the app. I can provide more packages for Linux in the future to simplify the installation process.

For running this on macOS please note that this app is not yet signed and must be allowed for execution. In the future I plan to enroll to the needed Apple Developer Program and sign the app.
More information, in case you have problems, can be found in this manual section.

Why did I create this app?

I created this app because I wanted something very simple and fast that can use my single-RGB-capable light source combined with tethered scanning for a rapid first-conversion workflow.
The app has a clear and limited scope: it should quickly give you a conversion with high color accuracy and a print-ready contact sheet for archiving your negatives, but it should not replace a full-fledged image editor like Darktable, Lightroom or Capture One, or offer as many features as NegPy. This lets it excel at its own use case and stay easy to use.
TetherInvert produces flat scans out of the box for your own workflow.
With a functional editor inspired by the Frontier's controls, you can get prints with adjusted black and white points and corrected colors within seconds.
For more serious editing work you can jump directly into Lightroom Classic.
With its own plug-in, bundled with the app, Lightroom binds the scan folder as a hot folder. In practice you can use TetherInvert just for the initial conversion to a flat image and edit directly in Lightroom as you go, frame by frame.

You may ask yourself: "Why another app, and why not use something that already exists, like NLP or NegPy?"
Very good question! Both apps are good and I have used them a lot. But NLP currently does not support single RGB scanning, and NegPy's feature set is intentionally much bigger, a one-stop suite for many different needs, which was overwhelming for me.

In TetherInvert everything is trimmed for efficiency: fast corrections on previews in the edit panel, with instant feedback in the image and no loading times, and "printing" in batches.

My personal favorite way to use TetherInvert:

  1. Scan a frame using SPACE or a foot pedal
  2. Hold TAB to view the scan of the frame after it is converted
  3. With TAB held down, use the other hotkeys to quickly edit the scan
  4. Let go of TAB, advance the film in your holder and press SPACE again to scan the next frame
  5. Repeat until done
  6. Create your contact sheet and export the images
  7. Done, or further enhance the images in your favorite editor

Currently the app is available on macOS and Linux. Due to technical limitations of the libraries used for camera communication, Windows is not supported yet.
I have extensively tested the app with a Sony a6700, but other brands should work, too.
And this is where I would love for this app to fit some of your needs too, and to get tested. I am very thankful for any feedback!

The app was initially built to fit my own needs, but if it fits others as well, even better.

Lastly, a topic that is personally important to me and that I want to be fully transparent about: although I work in software development for a living, first and foremost I wanted an application that works and that I can use in my free time, away from computer science, pursuing my other passion, photography. So of course, I used AI to assist me with creating the application and its logic. And to be honest with you: I wouldn't have been able to pull off this app in my limited spare time without the assistance of AI.
But this is also why I want to keep the scope of this app as it is and not recreate a full photo editor. The current complexity is manageable and lets me test features thoroughly and deliver a (hopefully) very functional product, without the danger of complexity creep from just "vibing" on and adding lots of complex and fancy features.
Of course, I have reviewed the AI-written code and my own as well as I could, and tested the app itself by scanning and editing many rolls of film. I am confident that this application meets my own quality standards, and I can guarantee that every reply to feedback and every conversation here happens completely without AI. You are talking to a human! ;-)


r/AnalogCommunity • • 1h ago

DIY I've finally found a use for my old film boxes!

Post image
8 Upvotes

Took me one evening to glue everything together - but it looks great on my (Ikea Billy) display shelf.


r/AnalogCommunity • • 1h ago

Troubleshooting - Photos I feel like my images aren't that sharp

Thumbnail
gallery
9 Upvotes

Recently got a Canon 1n with 50mm ef 1.8ii and have recently been on a few trips.

I feel like the images aren't as sharp as they could be, I've tried different film stock and different lighting and with and without the lens filter. I've tried to shoot with a faster shutter speed too

I am looking at getting another lens soon

I've spoken to my lab who have done all my other images and haven't felt like this before with different cameras being sharper in the same format and scan quality

I will post some images

Any support is helpful, let me know if it's in my head or aren't as sharp


r/AnalogCommunity • • 2h ago

Discussion Wedding film stock and advice for amateur.

2 Upvotes

I’ll start by saying I’m no great photographer. Don’t feel I really have the ‘eye’, and my technical skills are pretty basic. But I enjoy taking pictures and find it relaxing and somewhat cathartic. I haven’t been shooting much these days but when I do it’s mostly family (nieces and nephews), friends, my cat and some basic still life (I like firearms so I have taken pictures of those, as well as cars etc).

My sister is getting married in March, and she has asked if I could bring my camera and take a few pictures. She has hired a wedding photographer, who will be doing digital, film and super 8. I definitely want to stay out of their way, and will mostly take pictures of the guests and other happenings. It will be an early autumn wedding, outdoor ceremony and indoor reception (pretty dark, with warm chandelier lighting, afternoon light through doors and some windows ). Starts 2pm, finishes 10pm. I have a Pentax Spotmatic 2. I have 35,50 and 135mm prime lenses, also a dinky little godox lux junior flash. Couple is mixed race, fair skin as well as dark skin. (I once took a photo of them both in poor lighting, I messed up and he was a dark blob with white teeth…..)

Few questions I had:

1: Any recommended film stock? I was thinking iso 400 for outdoors, 800 for indoors. Colour and b&w. Never used Portra as I felt it was too pricey for me, but I’ve heard it handles varied exposure and skin tones well? Thinking hp5 for b&w? Probably will bring roughly 4-6 rolls in total for the day, + my basic everyday film for the days before and after wedding.

2: Etiquette and any tips for the day? I don’t want to annoy the professional photographers, or make their job harder.

3: I want to take some time to do some more practice and take some pictures to get myself ‘ready’ so to speak. Are there any ideas/ways to practice or improve that you recommend? I’m guessing just lots of pictures in various conditions?

I did get some secondhand books on film photography I found at an op shop so will read through those again as well, but thought this community might have some good tips too.

Thanks!


r/AnalogCommunity • • 4h ago

Discussion I mixed my own ECN-2 developer and used it to make color positives from Harman Phoenix 125

Thumbnail
gallery
327 Upvotes

I shot a roll of Harman Phoenix 125 on a Hasselblad 500C/M with an A16 back, a Zeiss Distagon 50mm f/4 CF FLE, and a Hoya 81B warming filter. I metered the whole roll at EI 16.

I made my own ECN-2 color developer using CD-3 (Koltin Sullivan), potassium bromide and anhydrous sodium carbonate (both from Bostick & Sullivan), anhydrous sodium sulfite and Flic Film Anti-Calcium (both from Freestyle Photo), and plain baking soda. I used Kodak Color Negative Bleach III Replenisher with Kodak Color Negative Bleach Starter for the bleach bath and Kodak Color Negative Fixer and Replenisher for the separate fixer bath (all three from Freestyle Photo).

I used to get 25–30 rolls out of a $35 CineStill ECN-2 kit, used to just say $1/roll to develop. Now I replace my homemade developer every 15 rolls to keep it fresher, and I estimate about $0.30/roll.

I ran the roll on a PIRA rotary processor with continuous agitation. First development was 12:00 at 103°F in stock XDEV/XTOL.

I rinsed the film four times in the dark for 30 seconds each. Then I opened the tank and exposed each side of the reel to white light for 2:00, 4:00 total. The first developer forms a black-and-white silver image. The light exposes the silver halide left behind so the color developer can form the positive dye image.

Color development was 4:08 at 103°F in my home-mixed ECN-2. My fresh-batch time is 3:30. This liter had already processed six roll equivalents, so I added 18%.

I used Fotospeed SB50 stop bath at 1+19 for 0:30, rinsed, then used Kodak Bleach III for 6:30. After a 1:30 wash, I fixed in Kodak Flexicolor fixer for 6:30 and finished with a 3:15 wash and Photo-Flo.

The positives are visible directly on the film. I included a photo of the strip on the light pad alongside the scans, which I white-balanced in Negative Lab Pro (Linear, auto-neutral).

Overall, I'm pretty pleased with the experiment since this is about $10 cheaper than shooting E100. I threw in the warming filter as I had seen others get much more blue out of their rolls, but I think I'll go without a filter for the next one and compare.


r/AnalogCommunity • • 5h ago

Repair Olympus Om2n light seal question

Thumbnail
gallery
1 Upvotes

Hi folks, just replacing some light seals. Have done it before but a while back and struggling to find the answer online. Does the latch side need a seal or the latch side of the door?


r/AnalogCommunity • • 5h ago

Troubleshooting - Gear I lost my ball.

Post image
2 Upvotes

The cover on my Olympus AF-1 Twin was sticking a bit. Unfortunately, whilst cleaning it, I lost the little metal ball that sits on the spring. Does anyone happen to know how big it is?


r/AnalogCommunity • • 6h ago

Discussion mirCam app

0 Upvotes

mirCam transforms your Android smartphone into a film camera, with photographic rendering inspired by Kodak Portra, Fujifilm and Kodak film stocks. If you are interested to test DM your Google play mail. Have a nice day.


r/AnalogCommunity • • 6h ago

Troubleshooting - Gear is my camera broken?

1 Upvotes

i suddenly got LE message on my pentax espio 145m super display, i can't turn the camera off by sliding the on/off switch.. i'm not sure what happened...


r/AnalogCommunity • • 6h ago

Scanning Best scanning setup with a budget around 500$, already having a macro lens.

2 Upvotes

I‘ve been paying my lab to develop and scan my 35mm films for the last few years. Now that my Hasselblad 500 cm has arrived, the cost per photo is bothering me a little bit.

I have a Canon Macro Lens EF 100mm 1:2.8 L IS USM, Canon RP, Canon 6D Mark II and Canon R50 at home.

Will this be enough for a system like the Valo Studio 360 or should I look for another scanning option around that pricepoint?

Atm I’ll keep sending the films to the lab for development. Scanning is the priority rn, as I also have boxes full of dias of my wife’s grandparents I’d like to scan eventually.

Thank you for your help 🎊


r/AnalogCommunity • • 8h ago

Troubleshooting - Gear Can anyone help me indentify this darkslide?

Thumbnail
gallery
8 Upvotes

I bought a camera bag second hand and this was inside it. It would be good to know what camera it’s from to pass it on to someone who might use it. 64mm x ~115mm


r/AnalogCommunity • • 8h ago

Discussion Slide projector for kids

4 Upvotes

So. We have old soviet film roll projector, works semi okay (I need to fix the position of the bulb, it's darker on one side). It was designed for kids and there's lots of fairytales and stories from thet time circulating on the second hand market in my country. It's called Diax, I'm from Czech. I found out people from Poland have their own version, called ANIA. They both have different film loading method to Diax. Diax is horizontal, they load it vertically. I want to get some of their stories because in Hungaria they still print new and they look pretty cool!

Kind of want to ditch the diax and cut up the fairytales and use a slide projector instead. I feel like it'd be step up light bulb wise, but I'm torn. I am not sure I want to get Ania just for the other fairytales and have two projectors next to each other like that... Maybe I'm just overthinking it.

Forgot to mention all the fairytales are on 35mm film, Dian, ANIA, the ones from Hungary... I shoot on 35mm film too, but negatives so we won't view those.


r/AnalogCommunity • • 8h ago

Discussion Which SLR camera has your favorite viewfinder?

7 Upvotes

Which SLR has your favourite viewfinder? For example in terms of information displayed and the way in which it is displayed (needle, digital, optical readout)? Or the maginification/frame coverage?

Would love to hear from you!


r/AnalogCommunity • • 11h ago

Troubleshooting - Gear Issue with autofocus - Ricoh My port Zoom Mini P

2 Upvotes

Hey, looking for help as the autofocus is always off.

The background is always blur despite half press focus lock. The focus point is always outside of the middle square in the view finder.

Wondering if its a dusty autofocus, if so anyone knows what's the best way I can clean it myself?

Thanks in advance! (:


r/AnalogCommunity • • 11h ago

Discussion Switching a Partially Exposed 120 Film Roll from Mamiya RB67 (6×7) to Rolleicord (6×6) — Is Frame 7 Safe, or Should I Start at Frame 8?

0 Upvotes

I’m trying to continue shooting a partially exposed roll of 120 film in a different medium-format camera, and I’d like to determine as accurately as possible where it is safe to resume.

Here is the exact situation:

I loaded an Ilford Delta 100 120 film roll into a Mamiya RB67 Pro-S (6×7).

I exposed frames 1 through 5.

After taking frame 5, I advanced the film one full frame further, reaching the frame 6 position, but did not take a photograph.

In complete darkness, I rewound the entire roll back onto its original spool.

I then loaded it into a Rolleicord Va (6×6), aligning the backing paper’s start arrow according to the camera’s instructions.

I advanced the film to frame 1 on the Rolleicord’s counter. No photographs have been taken with the Rolleicord yet.

My main question:

Can I safely start exposing from frame 7 on the Rolleicord, or should I skip frame 7 and begin with frame 8 to avoid overlapping the previously exposed frames?

I’m particularly interested in a calculation based on the actual film transport and frame geometry, rather than a general rule of thumb.

Ideally, the calculation should account for:

The difference between the 6×7 and 6×6 image dimensions.

The actual film advance per frame in each camera.

The initial distance between the backing paper’s start mark and the first exposure area in each camera.

Frame spacing and any mechanical tolerances or variations in film advance.

The fact that I advanced the film one additional frame after exposing frame 5 in the RB67 before rewinding it.

If you have done something similar

I’d especially appreciate responses from anyone who has transferred a partially exposed 120 roll between cameras with different formats or film-advance mechanisms.

If you have relevant experience, could you please provide more than just a rule of thumb such as “I usually skip two frames”?

It would be much more helpful if you could share one of the following:

The measurements or calculation you used to determine the safe starting frame.

Scans or photographs of the resulting negatives, showing the transition between the two cameras’ exposures.

The actual amount of overlap or blank space observed between the last exposure in the first camera and the first exposure in the second camera.

The camera models and frame numbers involved, so the result can be compared with my situation.

The specific goal is to establish whether frame 7 is genuinely safe to expose, or whether starting from frame 8 is necessary.

I’d rather avoid wasting a frame, but preventing overlap is the priority.

Thanks!


r/AnalogCommunity • • 12h ago

Troubleshooting - Gear Contax RTS II won’t turn on, any common issues/solution solutions?

Post image
4 Upvotes

I recently received this Contax RTS II from a family member who passed away a few years ago. I know he took meticulous care of the camera until he stopped using it about 20 years ago. Mechanically, there don’t seem to be any issues. The backup 1/50th shutter speed works great and the film advance feels great. I read through the manual today (praise be to Mr Butkus), and I installed new batteries (thankfully, there weren’t any old batteries sitting in the chamber corroding things). Are there any common electrical issues with this camera, and might it be repairable? Thank you in advance!

edit: pardon my repeating of “solutions” in the title


r/AnalogCommunity • • 12h ago

Discussion Lord help me I hope I didn’t blow this last shoot… Mamiya 645 original.

1 Upvotes

I just photographed my friend and his wife that they hired me for. It has been so long since I shot with my Mamiya 645. Shot two rolls. Kodak 200 and another 400. I used a the PD viewfinder with the shutter on the finder set at 1/60 and the set the iso speeds directly on it before shooting.

I realized I never changed the shutter at any point. I started at golden hour with iso 200 and then as the sun had dipped, less light, we shot 400 after switching to the 400 roll. The finder light meter was always metering at green for corrected set aperture. So I was confident when firing the shutter, and it always shot fast, but I fear I should’ve been more aware of the shutter dial.

Won’t be able to develop until Monday. Any thoughts out there?

Best


r/AnalogCommunity • • 13h ago

Discussion Washi Niépce Film

Thumbnail
gallery
13 Upvotes

So this Summer i viseted the photography museum in Chalon-sur-Saône where the first Pictures was Taken (it wasnt in Chalon-sur-Saône but near it) in the museum I got this roll of film. Later I found out that this is a special film only for the museum and now iam wondering...what exactly is this and how do I probably develop it. Iam building a wireless shutter release for my cameras and when its done i will try to shoot this film but until then iam clueless


r/AnalogCommunity • • 15h ago

Troubleshooting - Gear Stiff focusing ring fix?

0 Upvotes

I just acquired a Nikon 24mm f/2.8 AI lens. When focusing towards infinity it gets really stiff which causes it to slip and skip some distance. Does this require a CLA which sounds like it would cost more than what I paid for the lens or is there some simple fix?


r/AnalogCommunity • • 15h ago Bravo

Gear Shots I turned an Instax SQ1 into an instant back for my Mamiya RB67

Thumbnail
gallery
60 Upvotes
Polaroid backs for the RB67 have been mostly useless since peel-apart pack film was discontinued in 2016, so I built my own instant back around Instax Square film.

The donor is a regular Instax SQ1. I stripped out its lens, main board and flash, kept the film transport and eject motor, and designed a 3D-printed adapter that locks onto the RB67 like a normal back. The eject motor now runs straight from the SQ1's batteries through a small button in the old viewfinder opening.

Shot on an RB67 Pro S with a Sekor C lens. The prints are real Instax Square, scanned with my phone.

Happy to answer questions about the fit, light sealing or the teardown.

r/AnalogCommunity • • 16h ago

Troubleshooting - Photos Help with film fixer

3 Upvotes

HII! I'm super new to film and it's my first time developing anything. I'm doing a porject for my high school chem class about developing film in different pH's of caffenol developer. I'm using an old fujifilm camera I have with this b/w film I found for like 10 dollars online: Kentmere PAN 400 Black and White Negative Film (35mm Roll Film, 24 Exposures). I was going to just buy film fixer but my teacher asked if I can make it was the chemicals used and unknowly I said yes. I'm hoping there is some kind of way. I searched it up but everything online was kinda confusing so I thought to post here for help. This is what I ordered for both the developer and the fixer:

  • Ammonium Thiosulfate (60% Liquid)?: 115 ml
  • Sodium Carbonate: 32.4 g
  • Instant Coffee Crystals: 24.0 g
  • Ascorbic Acid: 9.6 g
  • Sodium Sulfite (Anhydrous): 9.0 g
  • Sodium Metabisulfite: 3.6 g
  • Potassium Bromide: 0.6 g

If you guys have any tips or tutorials that would be super helpful. I'm thinking of doing it just in a room because I'm a broke hs student and don't have money for a patterson jar lol. Anyways any help is appreciated!!!


r/AnalogCommunity • • 16h ago

Troubleshooting - Gear OM-2n: Auto works fine, viewfinder meter off – anyone else?

Post image
16 Upvotes

Hey everyone,

​I’ve been comparing my Olympus OM-2 and OM-2n recently and ran into an interesting quirk with the OM-2n that I’d love to get the community’s take on.

​Both cameras seem to be in good shape overall and sound healthy. After testing them against a light meter app, my OM-2 reads pretty accurately (maybe slightly on the bright side). On the OM-2n, Auto mode seems to work properly and picks accurate shutter speeds, but the meter needle in the viewfinder shows a slower/different value than what’s actually happening (for example, pointing toward 1s when it’s taking around 1/2s). In Manual mode, following the viewfinder meter leads to the wrong exposure as well, so I can’t really rely on the meter readout for manual shooting right now—even though Auto exposure itself appears to be working as expected.

​Fresh batteries (tried both LR44 and SR44) didn’t change the offset.

​Before I decide what to do next, I wanted to ask:

​Has anyone else experienced this exact behavior on an OM-2n (accurate Auto shutter speeds, but an inaccurate viewfinder meter / manual readout)?

​What usually causes this on the OM-2n, and is it something that can be adjusted/fixed without major parts replacement?

​Does this look like a clear case for a CLA / sending it to a technician or specialist shop, or is there anything simple I should double-check first?

​Thanks in advance for any insight or experiences you can share!


r/AnalogCommunity • • 16h ago

Discussion Does what stand you use really matter that much?

Post image
7 Upvotes

I’ve always seen videos of people reviewing new stands and how good they are, but the prices of them are eye watering and it makes me wonder does what stand you have really matter at all because I got this old videography stand at a garage sale for 5$ like 6 years ago i’ve never really used it all that much but when I have, it works fine and does its job fine so why should i ever need to buy a new one?