r/AnalogCommunity • • 19h ago

Gear Shots First Medium Format!

Post image
340 Upvotes

Only made it 3 steps into the store when I saw it and they offered me a deal I couldn't resist. 😩 They said it had only been on the floor for an hour and had already had strong interest. Already loaded it up with Gold 200!


r/AnalogCommunity • • 3h ago

Discussion I mixed my own ECN-2 developer and used it to make color positives from Harman Phoenix 125

Thumbnail
gallery
241 Upvotes

I shot a roll of Harman Phoenix 125 on a Hasselblad 500C/M with an A16 back, a Zeiss Distagon 50mm f/4 CF FLE, and a Hoya 81B warming filter. I metered the whole roll at EI 16.

I made my own ECN-2 color developer using CD-3 (Koltin Sullivan), potassium bromide and anhydrous sodium carbonate (both from Bostick & Sullivan), anhydrous sodium sulfite and Flic Film Anti-Calcium (both from Freestyle Photo), and plain baking soda. I used Kodak Color Negative Bleach III Replenisher with Kodak Color Negative Bleach Starter for the bleach bath and Kodak Color Negative Fixer and Replenisher for the separate fixer bath (all three from Freestyle Photo).

I used to get 25–30 rolls out of a $35 CineStill ECN-2 kit, used to just say $1/roll to develop. Now I replace my homemade developer every 15 rolls to keep it fresher, and I estimate about $0.30/roll.

I ran the roll on a PIRA rotary processor with continuous agitation. First development was 12:00 at 103°F in stock XDEV/XTOL.

I rinsed the film four times in the dark for 30 seconds each. Then I opened the tank and exposed each side of the reel to white light for 2:00, 4:00 total. The first developer forms a black-and-white silver image. The light exposes the silver halide left behind so the color developer can form the positive dye image.

Color development was 4:08 at 103°F in my home-mixed ECN-2. My fresh-batch time is 3:30. This liter had already processed six roll equivalents, so I added 18%.

I used Fotospeed SB50 stop bath at 1+19 for 0:30, rinsed, then used Kodak Bleach III for 6:30. After a 1:30 wash, I fixed in Kodak Flexicolor fixer for 6:30 and finished with a 3:15 wash and Photo-Flo.

The positives are visible directly on the film. I included a photo of the strip on the light pad alongside the scans, which I white-balanced in Negative Lab Pro (Linear, auto-neutral).

Overall, I'm pretty pleased with the experiment since this is about $10 cheaper than shooting E100. I threw in the warming filter as I had seen others get much more blue out of their rolls, but I think I'll go without a filter for the next one and compare.


r/AnalogCommunity • • 14h ago Bravo

Gear Shots I turned an Instax SQ1 into an instant back for my Mamiya RB67

Thumbnail
gallery
58 Upvotes
Polaroid backs for the RB67 have been mostly useless since peel-apart pack film was discontinued in 2016, so I built my own instant back around Instax Square film.

The donor is a regular Instax SQ1. I stripped out its lens, main board and flash, kept the film transport and eject motor, and designed a 3D-printed adapter that locks onto the RB67 like a normal back. The eject motor now runs straight from the SQ1's batteries through a small button in the old viewfinder opening.

Shot on an RB67 Pro S with a Sekor C lens. The prints are real Instax Square, scanned with my phone.

Happy to answer questions about the fit, light sealing or the teardown.

r/AnalogCommunity • • 18h ago

Troubleshooting - Photos Dots everywhere!

Post image
56 Upvotes

Ayo, does someone here know where those little dots come from? I used hc-110 for the first time.. Could be heat two because i shot this reel in a heatwave in the summer.

Could be contamination too, i used new fixer.

Thanks in advance!


r/AnalogCommunity • • 21h ago

Discussion I just picked up a collection of vintage slides my grandparents took, some of which I think go back to the 1950s and '60s. Can't wait to see what's on them!

Post image
36 Upvotes

There seems to be some Kodachrome too


r/AnalogCommunity • • 22h ago

Video Remarkable video on the “return” to film.

19 Upvotes

There is an over saturated amount of video’s on YouTube about film photography, some good, some not so much.

I came across a unique video by Harry Thong that is so well done that I just have to share. Harry does a brilliant job at taking the audience through the journey of the remarkable resurgence of film photography, not as a tutorial but through interviews.

I think that you may very well enjoy this “documentary“. (I’m not sure that documentary is the right word)

https://youtu.be/dCzJZzrrOS0?is=4ZZte6W5CxZLyzul


r/AnalogCommunity • • 14h ago

Troubleshooting - Gear OM-2n: Auto works fine, viewfinder meter off – anyone else?

Post image
15 Upvotes

Hey everyone,

​I’ve been comparing my Olympus OM-2 and OM-2n recently and ran into an interesting quirk with the OM-2n that I’d love to get the community’s take on.

​Both cameras seem to be in good shape overall and sound healthy. After testing them against a light meter app, my OM-2 reads pretty accurately (maybe slightly on the bright side). On the OM-2n, Auto mode seems to work properly and picks accurate shutter speeds, but the meter needle in the viewfinder shows a slower/different value than what’s actually happening (for example, pointing toward 1s when it’s taking around 1/2s). In Manual mode, following the viewfinder meter leads to the wrong exposure as well, so I can’t really rely on the meter readout for manual shooting right now—even though Auto exposure itself appears to be working as expected.

​Fresh batteries (tried both LR44 and SR44) didn’t change the offset.

​Before I decide what to do next, I wanted to ask:

​Has anyone else experienced this exact behavior on an OM-2n (accurate Auto shutter speeds, but an inaccurate viewfinder meter / manual readout)?

​What usually causes this on the OM-2n, and is it something that can be adjusted/fixed without major parts replacement?

​Does this look like a clear case for a CLA / sending it to a technician or specialist shop, or is there anything simple I should double-check first?

​Thanks in advance for any insight or experiences you can share!


r/AnalogCommunity • • 12h ago

Discussion Washi Niépce Film

Thumbnail
gallery
13 Upvotes

So this Summer i viseted the photography museum in Chalon-sur-Saône where the first Pictures was Taken (it wasnt in Chalon-sur-Saône but near it) in the museum I got this roll of film. Later I found out that this is a special film only for the museum and now iam wondering...what exactly is this and how do I probably develop it. Iam building a wireless shutter release for my cameras and when its done i will try to shoot this film but until then iam clueless


r/AnalogCommunity • • 21h ago

Scanning Stitching a 6×7 portrait from 15 scan tiles

9 Upvotes

I shot this portrait on Ilford HP5+ with a Mamiya RZ67 and the 110 mm f/2.8 wide open, then developed it in Perceptol 1:3. I wanted a master I could print from or crop later.

I scanned it with a Nikon D800 and a 60 mm macro at about 0.9×. I used five rows of three and aimed for 40% overlap in both directions, keeping every scan exposure at f/8, 0.4 s and ISO 100. The uncropped 16-bit RGB PNG includes the film rebate and the holder around it. It measures 17,447 × 18,153 pixels and takes about 862 MB on disk.

Straight from the stitcher, shown at reduced size. I scanned from the emulsion side and kept that orientation, so the lettering reads backwards.
Contact sheet of the 15 captures used in the stitch.
100% crop from the master at the window edge.

On paper, that setup gives about 4,700 samples per inch at the film plane before lens and Bayer limits. For scale, Hasselblad lists 3,200 dpi for 60 mm film on the Flextight X1 and X5.

The first snag was keeping track of retakes. A retake for dust or vibration breaks the link between file order and grid order. I use a printed movement guide to keep the spacing consistent and mark one keeper per position. I can swap in a retake and pick up where I left off.

The plain wall was the tricky bit. My PTGui Trial export had a visible step in the window edge, and the project showed two tiles with no control points. Even a slight misalignment can soften the grain when the overlap is blended.

I wrote a stitcher for my own scans that uses each tile’s row and column to align them as parts of one flat sheet. It blends broad changes in tone while keeping the finest grain from one capture. The 100% crop above shows the same window edge in the finished stitch.

For those who stitch 120 scans, how do you line up tiles when the overlap is mostly plain wall or sky? Do you plan the grid to catch an edge, place control points by hand, or use a fixed stage?


r/AnalogCommunity • • 7h ago

Troubleshooting - Gear Can anyone help me indentify this darkslide?

Thumbnail
gallery
8 Upvotes

I bought a camera bag second hand and this was inside it. It would be good to know what camera it’s from to pass it on to someone who might use it. 64mm x ~115mm


r/AnalogCommunity • • 7h ago

Discussion Which SLR camera has your favorite viewfinder?

7 Upvotes

Which SLR has your favourite viewfinder? For example in terms of information displayed and the way in which it is displayed (needle, digital, optical readout)? Or the maginification/frame coverage?

Would love to hear from you!


r/AnalogCommunity • • 15h ago

Discussion Does what stand you use really matter that much?

Post image
6 Upvotes

I’ve always seen videos of people reviewing new stands and how good they are, but the prices of them are eye watering and it makes me wonder does what stand you have really matter at all because I got this old videography stand at a garage sale for 5$ like 6 years ago i’ve never really used it all that much but when I have, it works fine and does its job fine so why should i ever need to buy a new one?


r/AnalogCommunity • • 22h ago

Repair Leica m6 Anti Flare Kit

6 Upvotes

Hey, I've had my M6 for almost 10 years now, and I've always experienced some flare in the viewfinder. I'm getting ready to send it off for a CLA because my focus patch alignment is off.

I'm curious if anyone here has had the anti-flare upgrade done. If so, did you notice a worthwhile improvement? Would you recommend having it. Mostly curious about contrast and improvement to flare. Looking at the YYE kit so its the condenser lens and MP Coated front windows.


r/AnalogCommunity • • 23h ago

Repair Deutsch Elektronik Ultrablitz V

5 Upvotes

I just got this flash yesterday.
I used it yesterday for my gizmo plate, after getting it warmed up again, and it did great on the AC cord.

The Battery power was non-functional when I got it.
On inspection everything looked ok, except somebody else had obviously taken it apart before and lost a screw 🙄.

I don't have any meters or anything anymore, but I suspected the relay that generates the pulsed DC for the transformer.
I popped the can open to find dirty contacts, the lock nut for the center point contact loose in the can, and the point too far out of adjustment to startup.

After cleaning and adjusting the fidly-bits, it all works 🥳.
Re-canned it, with some RTV at each end of the can (not on the wibly-parts).
Wrapped the can in tape so it looked nice again, forgot to take a pic of that.

I also gave it a modern battery pack, cause where would I even get dry-cell D's, lol.
https://i.imgur.com/QZhQEMW.jpeg

https://i.imgur.com/eCz23wy.jpeg

https://i.imgur.com/PmWIYTh.jpeg

https://i.imgur.com/pokMYb4.mp4

https://i.imgur.com/wZV0L1W.jpeg

https://i.imgur.com/ahiQHOQ.jpeg

https://i.imgur.com/AZ1Kj5a.jpeg

https://i.imgur.com/6nCJu6V.mp4

https://v.redd.it/da3fatb01z2i1

ETA: IDK whats up with reddit today, it will only let the first link link.
ETA2: fixed it.


r/AnalogCommunity • • 7h ago

Discussion Slide projector for kids

4 Upvotes

So. We have old soviet film roll projector, works semi okay (I need to fix the position of the bulb, it's darker on one side). It was designed for kids and there's lots of fairytales and stories from thet time circulating on the second hand market in my country. It's called Diax, I'm from Czech. I found out people from Poland have their own version, called ANIA. They both have different film loading method to Diax. Diax is horizontal, they load it vertically. I want to get some of their stories because in Hungaria they still print new and they look pretty cool!

Kind of want to ditch the diax and cut up the fairytales and use a slide projector instead. I feel like it'd be step up light bulb wise, but I'm torn. I am not sure I want to get Ania just for the other fairytales and have two projectors next to each other like that... Maybe I'm just overthinking it.

Forgot to mention all the fairytales are on 35mm film, Dian, ANIA, the ones from Hungary... I shoot on 35mm film too, but negatives so we won't view those.


r/AnalogCommunity • • 11h ago

Troubleshooting - Gear Contax RTS II won’t turn on, any common issues/solution solutions?

Post image
4 Upvotes

I recently received this Contax RTS II from a family member who passed away a few years ago. I know he took meticulous care of the camera until he stopped using it about 20 years ago. Mechanically, there don’t seem to be any issues. The backup 1/50th shutter speed works great and the film advance feels great. I read through the manual today (praise be to Mr Butkus), and I installed new batteries (thankfully, there weren’t any old batteries sitting in the chamber corroding things). Are there any common electrical issues with this camera, and might it be repairable? Thank you in advance!

edit: pardon my repeating of “solutions” in the title


r/AnalogCommunity • • 19h ago

Troubleshooting - Gear i bought a nikkor lens and the focus is stuck at infinity

4 Upvotes

anyone got any idea of how to fix it?


r/AnalogCommunity • • 14h ago

Troubleshooting - Photos Help with film fixer

3 Upvotes

HII! I'm super new to film and it's my first time developing anything. I'm doing a porject for my high school chem class about developing film in different pH's of caffenol developer. I'm using an old fujifilm camera I have with this b/w film I found for like 10 dollars online: Kentmere PAN 400 Black and White Negative Film (35mm Roll Film, 24 Exposures). I was going to just buy film fixer but my teacher asked if I can make it was the chemicals used and unknowly I said yes. I'm hoping there is some kind of way. I searched it up but everything online was kinda confusing so I thought to post here for help. This is what I ordered for both the developer and the fixer:

  • Ammonium Thiosulfate (60% Liquid)?: 115 ml
  • Sodium Carbonate: 32.4 g
  • Instant Coffee Crystals: 24.0 g
  • Ascorbic Acid: 9.6 g
  • Sodium Sulfite (Anhydrous): 9.0 g
  • Sodium Metabisulfite: 3.6 g
  • Potassium Bromide: 0.6 g

If you guys have any tips or tutorials that would be super helpful. I'm thinking of doing it just in a room because I'm a broke hs student and don't have money for a patterson jar lol. Anyways any help is appreciated!!!


r/AnalogCommunity • • 4h ago

Troubleshooting - Gear I lost my ball.

Post image
2 Upvotes

The cover on my Olympus AF-1 Twin was sticking a bit. Unfortunately, whilst cleaning it, I lost the little metal ball that sits on the spring. Does anyone happen to know how big it is?


r/AnalogCommunity • • 5h ago

Scanning Best scanning setup with a budget around 500$, already having a macro lens.

2 Upvotes

I‘ve been paying my lab to develop and scan my 35mm films for the last few years. Now that my Hasselblad 500 cm has arrived, the cost per photo is bothering me a little bit.

I have a Canon Macro Lens EF 100mm 1:2.8 L IS USM, Canon RP, Canon 6D Mark II and Canon R50 at home.

Will this be enough for a system like the Valo Studio 360 or should I look for another scanning option around that pricepoint?

Atm I’ll keep sending the films to the lab for development. Scanning is the priority rn, as I also have boxes full of dias of my wife’s grandparents I’d like to scan eventually.

Thank you for your help 🎊


r/AnalogCommunity • • 10h ago

Troubleshooting - Gear Issue with autofocus - Ricoh My port Zoom Mini P

2 Upvotes

Hey, looking for help as the autofocus is always off.

The background is always blur despite half press focus lock. The focus point is always outside of the middle square in the view finder.

Wondering if its a dusty autofocus, if so anyone knows what's the best way I can clean it myself?

Thanks in advance! (:


r/AnalogCommunity • • 55m ago

Discussion Wedding film stock and advice for amateur.

1 Upvotes

I’ll start by saying I’m no great photographer. Don’t feel I really have the ‘eye’, and my technical skills are pretty basic. But I enjoy taking pictures and find it relaxing and somewhat cathartic. I haven’t been shooting much these days but when I do it’s mostly family (nieces and nephews), friends, my cat and some basic still life (I like firearms so I have taken pictures of those, as well as cars etc).

My sister is getting married in March, and she has asked if I could bring my camera and take a few pictures. She has hired a wedding photographer, who will be doing digital, film and super 8. I definitely want to stay out of their way, and will mostly take pictures of the guests and other happenings. It will be an early autumn wedding, outdoor ceremony and indoor reception (pretty dark, with warm chandelier lighting, afternoon light through doors and some windows ). Starts 2pm, finishes 10pm. I have a Pentax Spotmatic 2. I have 35,50 and 135mm prime lenses, also a dinky little godox lux junior flash. Couple is mixed race, fair skin as well as dark skin. (I once took a photo of them both in poor lighting, I messed up and he was a dark blob with white teeth…..)

Few questions I had:

1: Any recommended film stock? I was thinking iso 400 for outdoors, 800 for indoors. Colour and b&w. Never used Portra as I felt it was too pricey for me, but I’ve heard it handles varied exposure and skin tones well? Thinking hp5 for b&w? Probably will bring roughly 4-6 rolls in total for the day, + my basic everyday film for the days before and after wedding.

2: Etiquette and any tips for the day? I don’t want to annoy the professional photographers, or make their job harder.

3: I want to take some time to do some more practice and take some pictures to get myself ‘ready’ so to speak. Are there any ideas/ways to practice or improve that you recommend? I’m guessing just lots of pictures in various conditions?

I did get some secondhand books on film photography I found at an op shop so will read through those again as well, but thought this community might have some good tips too.

Thanks!


r/AnalogCommunity • • 3h ago

Repair Olympus Om2n light seal question

Thumbnail
gallery
1 Upvotes

Hi folks, just replacing some light seals. Have done it before but a while back and struggling to find the answer online. Does the latch side need a seal or the latch side of the door?


r/AnalogCommunity • • 4h ago

Troubleshooting - Gear is my camera broken?

1 Upvotes

i suddenly got LE message on my pentax espio 145m super display, i can't turn the camera off by sliding the on/off switch.. i'm not sure what happened...