Maytag Neptune electric dryer, model MDE3000AYW developed a loud, repetitive knocking noise that occurred approximately once per drum revolution. Initially, the noise only occurred when clothes were in the dryer. Eventually, it became noticeable even with an empty drum.
After disassembling the front of the dryer and raising the top, I discovered that one of the screws securing an internal drum baffle (the plastic fins that lift and tumble the clothes) had backed out considerably. Pictures are attached.
The screw was protruding from the outside surface of the rotating drum, far enough to strike the side of the dryer. Could also see scrape marks on the inside of the side of the dryer.
That was the problem!
I secured the loose screw, reassembled the dryer, and tested it. The dryer now operates normally, and the knocking noise is completely gone.
Interesting additional discovery: This appears to be a previously reported problem.
While researching the cause, I found this June 30, 2023 discussion on Reddit:
https://www.reddit.com/r/appliancerepair/comments/14nf8y2/
Another owner described Maytag dryer baffle screws repeatedly backing out and striking the sides of the dryer, producing a loud noise.
One response specifically identified the machine as an older Neptune dryer and suggested using a star washer and blue Loctite to keep the screws from loosening.
Maytag service documentation also identifies a loose drum baffle as a possible cause of thumping.
Good news, simple repair, no need to buy and replace parts.
In this case, a relatively simple repair eliminated the noise completely.