r/AskEngineers • • 1h ago

Discussion What kind of sensor should i use ?

0 Upvotes

I need to align two holes measuring 2 mm wide and 3 mm in height 1.5 cm apart for a school project. The idea is the 2 holes align with some tolerance (hence 2 mm wide and 3 mm in height). Laser beam/Sensor will go through the holes and if they do not align will give a signal that lights up an LED. Laser beam/sensor can be 0.1mm thick does not matter as long as it passes though both holes. Must work in low light or total darkness.

What kind of mass market sensor/laser should i use (hopefully cheap just for school).

I was thinking of a tof sensor but i am not sure what the beam size is huge. Am i on the right track ? Links for the sensor will be appreciated.

Is arduino enough ?


r/AskEngineers • • 14h ago

Mechanical in TOM , while we balancing force in reciprocating engine, why we always balance it partially ( because if we try to balance it completely we just change the direction of unbalanced force from horizontal to vertical) i know but why we can't balance it completely without any unbalanced force?

0 Upvotes

Hey guys, my professor probably taught me wrong but could you please explain it to me or provide a good explanation video link pls ::)


r/AskEngineers • • 3h ago

Mechanical Gym machine topples over during a heavy lift. Does the weight on his waist has any bearing to the work load?

0 Upvotes

Need help working out if the weight on his waist has any impact on the work load on the machine?

He is pulling the max weight on the machine. Regardless of the weights on his waist, the (max) load pulled on the cables are the same assuming someone is still able to pull it.

Hence the extra weights on his waist has no bearing to the machine falling over.