r/Construction • • Oct 19 '26

Informative 🧠 r/Construction Mod update past 90 Days

58 Upvotes

Here are some stats for the last 90 days. I have been slacking on giving an update but life has been busy and got in the way of doing this. Let me know if you have questions but below is some interesting stats for you all

Last 90 days

Activity

Post Approved (caught in filters) 102

Permanent ban count: 536

Last 30 days

665 New Post

22.9k Comments publishedĀ 

Removals

999 Post removed

5.7k Comments removed


r/Construction • • 6h ago

Picture Thanks for y'all's anchor advice. Got the project wrapped up last week.

Thumbnail
gallery
97 Upvotes

Fire treated lumber and high-impact rated drywall went into it. Did finishing work with red oak countertops and maple baseboards painted the same color as the lobby tile. Anchors less than every 2' into the ground with a SST post anchor on the short wall.


r/Construction • • 1h ago

Humor 🤣 Fuck it

Thumbnail
gallery
33 Upvotes

On a walk this afternoon and found a fire hydrant where they just said fuck it, It’s already at the right height just pour around it. Second picture for reference on how it should look.


r/Construction • • 1h ago

Tools šŸ›  What kind of bag is this?

Post image
7 Upvotes

What do you all know this as? I’ve never heard an actual name for this style of bag outside of hearing an old timer refer to them as saddle bags. And who makes some nice ones?


r/Construction • • 59m ago

Other TIPS for first time construction worker?

4 Upvotes

I went to my dad's church, and one of the members is a man who had broken wrist and is now healed.

He convinced me to join him tomorrow to remodel a bathroom. He said it would take a week.

I have no construction experience i do carpentry stuff projects like that with my dad but not indoor remodeling.

Also study cellular and molecular biochemistry at university.

I decided to take a gap semester.

And that man who requested this of me said he had no other worker to help him and urgently needed someone and if I said yes, then he would take me in and hire no other dude. I dont have details on where it is nor what we will be doing

Im 22 years old.

Is there any general tips I should know other than "no phone no music no long bathroom "


r/Construction • • 1d ago

Video Concrete demolition with an ocean view — Carlsbad, California

194 Upvotes

A little footage from our beach access repair project in Carlsbad. The crew is breaking down the old reinforced concrete stairway supports, with the Pacific right behind them.

Hard work, but the view isn’t bad.

Edit:

The columns had to be brought down to a specified elevation. To prevent spalling, the crew removed the last few inches with handheld tools.


r/Construction • • 13h ago

Picture Old foam can burst on a rainy day, finally got all the stains off this panel

Thumbnail
gallery
21 Upvotes

had two conduits going through a sandwich panel wall on a rainy day. grabbed an old can of spray foam to seal the penetrations and it suddenly burst out everywhere across the siding.

cured PU foam on grooved metal panels is a pain to get off without scratching the paint. took way longer than the actual conduit work, but finally got every trace off and put the caps on.

not naming the cleaner I used so it doesnt look like an ad.


r/Construction • • 6h ago

Tools šŸ›  Hair protection

Post image
4 Upvotes

Does anyone have any recommendations for silk liners for hair protection from hardhats similar to this, i would be buying this one if it wasn’t sold out, I’ve gotten sick of hairline damage and damage in general from wearing a hardhat


r/Construction • • 1d ago

Other Why do men spend so much time staring down holes

109 Upvotes

Ive worked on a bypass now for a few months, and above all I cannot understand the time men spend staring down holes which have been dug, it happens several times daily on various areas of the jobs with multiple teams involved.

Can anyone enlighten me? Previous to this I thought it only happened on beaches where there was a very keen interest to dig the holes


r/Construction • • 4h ago

Informative 🧠 How to seal between two worm/rpe liners

1 Upvotes

Here is the photo of two liner between bog and pond area. The water is seeping into underneath the pond liner. How do I seal the area between that. Water can flow from bog, it can flow from rain or waterfall leakages

It’s too late to take out the liner. I am thinking to use any sealant to put in which is Epdm/RPE FRIENDLY and can fill the gaps in between


r/Construction • • 17h ago

Other Electrician apprenticeship or Safety job while still in school for a bachelor’s in CM

4 Upvotes

Wassup guys. I basically have 3 and a half years left of my 4 year CM degree before I graduate. I’ve been looking to either start an apprenticeship as an electrician or get numerous certifications to start a safety job in construction while still in school. My girl and I just moved into a pretty nice apartment that costs some money so I was wondering if it’s worth it in the end to start an apprenticeship with the low amount of money that’s offered or to start with decent money working safety in construction. I’m in Georgia btw. Lmk what you guys think ! I would say I need to make at least $23 a hour but I’ve been seeing $17-$20 for apprenticeships. I’m about to turn 27 btw so I have grown man bills versus a teen or early 20 year old starting college.


r/Construction • • 12h ago

Careers šŸ’µ Moving from Bid Management into Pre-Construction – is it a smart career move?

1 Upvotes

UK-Based Hey everyone, I made this account solely for the purpose of getting advice from all of you, so whatever thoughts you'd have would be greatly appreciated!!

(Sorry for the essay you're gonna read below🤣🤣)

I've been working in the Construction industry for two years and in Bids for a little over a year now. I'm currently working in bids and tender coordination, as an Assistant Bid Manager, with experience supporting the preparation and submission of PQQs, ITTs and wider tender documentation.

I'm considering an opportunity to move into a Pre-Construction Coordinator role and would really appreciate some insight from people working in pre-construction, particularly those with experience in both areas.

A few things I'd be interested to hear your thoughts on:

Career progression:

Given my existing experience in bids, would moving into pre-construction be a good way to broaden my industry knowledge and develop my career?

Or could it potentially take me away from a more traditional bid management pathway?

Role differences:

How would you describe the main differences between bid management and pre-construction?

Where do the responsibilities overlap, and what additional knowledge or skills does pre-construction require?

Future opportunities:

What career paths can opening up experience in pre-construction lead to?

Could it provide a route into roles such as Pre-Construction Manager, Estimator, Bid Manager or wider project/commercial management?

Technical and mathematical skills:

How much maths is involved in pre-construction on a day-to-day basis?

Is it generally basic calculations, measurements, quantities and cost-related spreadsheets, or does it involve more advanced mathematical/technical knowledge?

Ultimately, I'm trying to establish whether this would be a worthwhile move for someone with a background in bids who wants to develop a broader understanding of the construction industry and keep their future career options open.

I'd appreciate any honest advice, experiences or things you wish you'd known when starting out. Thanks!


r/Construction • • 7h ago

Careers šŸ’µ Business majors, especially finance or information systems, do you have any regrets? Would you do something else now?

0 Upvotes

I’m planning on transferring to the University of Florida for either finance or information systems. I already like what they do, so my main goal is pay. My ultimate goal is to reach 150k after 8-10 years of experience, without working 60+ hrs every week, so no IB/PE. I know it’s not what most people earn, but I know it’s achievable. I’m also a bit worried about AI, so I’ve been thinking about construction management too. What do you recommend?
For reference, I’m 19, have a 4.0 GPA,
and work as a supervisor at a pharmacy


r/Construction • • 1d ago

Humor 🤣 Do you think Jesus was told to find the beam stretcher in his early apprenticeship?

184 Upvotes

r/Construction • • 1d ago

Picture Why did the painters have a big can of Grand Ma Brown's baked beans?

Thumbnail
gallery
69 Upvotes

r/Construction • • 1d ago

Structural Big day today. Rebuilding my mother-in-law’s 12x16 deck as a surprise for her 70th birthday—looking for eyes on my plan & stringer landing ideas as I’m still fresh in the trade and learning

Thumbnail
gallery
7 Upvotes

NEED ADVICE ASAP - Fresh in the trades attempting a 70th Birthday Surprise 12x16 Deck Rebuild For Mother In Law—Tell Me If My Plan Sounds on point or feel free to drop some advice or tips. I’m fresh in the carpentry trade and have spent a lot of time learning and reading as well. This is my second deck project. I have it stripped down and the excavator is here so There’s no turning back now šŸ˜‚

So I am Kicking off the rest of this ā€œBIGā€ to me project today while my mother-in-law is out of town ahead of a surprise party next week for her 70th birthday. The deck is in rough shape and needs code upgrades, so I’m tackling it as a surprise to save her a big bill. This is only my second time doing this kind of deck work alone as I’m very fresh in the trades but consider myself handy and willing to learn, I’m trying to do everything by the book without cutting corners and keeping safety as my number one priority.

Previous build context:
I previously added stairs to a small cantilever deck behind my detached garage (originally a step-out landing, set up as a secondary exit), adding supports and concrete piers to handle the extra load.
Digging down on that first job was rough—especially pouring a formed concrete landing pad that took around 40–80 lb bags of cement and a big mixer, almost more work than the stairs themselves. Dropping threaded rod into Sonotubes for post standoff plates worked well for me there. In hindsight I should have used 6x6s on that project as well but now I’ve learned and will do so especially as it’s code and this is a way bigger deck and not cantilevered.

Current state & tear-down:
Stripped the deck down to bare framing; joists are solid with no rot, and I’ve pulled 1,000+ nails.
Currently has 3 bouncy stringers nailed in from the back with no brackets and resting directly on dirt—swapping to 4 stringers with Simpson ZMAX Strong-Tie connectors.
Replacing direct-buried 4x4 posts with 6x6 posts sitting on concrete piers to bring it up to code.

Materials & fasteners:
Joists: Joist tape over the clean joists.
Fasteners: 2-1/2" #9 GRK all-purpose screws and 1-1/2" Strong-Drive SD screws for stringer brackets/clips, L-brackets connecting 6x6 posts under the deck, and post hardware at the bottom piers.
Stairs: Keeping the existing 7" rise / 10" run (code-compliant and comfortable), cutting 4 new stringers out of 2x12x16s.

Today’s plan & timeline:
Pull the old stringers to drop weight, then shore up the deck \\\\\\\~2 ft back from the front edge using 2x6 ledgers top/bottom with 5–6 vertical 2x4 studs so I have clearance to dig.
Planning to tie a rope to the front framing and keep light upward tension with the mini excavator bucket as a backup safety measure while shoring is in place.
Using a mini excavator instead of an auger because of all the rocks in the yard (I dug \\\\\\\~3.5 ft on old posts a few years back and didn't hit concrete, though I wouldn't be surprised if some is down there).
Digging 4 ft deep for footers with crushed stone in the bottom, covering holes until concrete arrives early next week, and setting post standoff plates with threaded rod dropped into Sonotubes.

Landing pad: Instead of pouring another massive formed slab with 40+ bags and a big mixer like my last stair landing, I’m looking at a 300–500 lb stone (like bluestone) set on crushed stone/gravel and use the excavator to move it and place it even with the ground so it doesn’t throw off the 7" rise / 10" run layout. That will make it easy for me to just make a new set of 4 stringers instead of 3 and follow the same rise and run on the 2x12x16s I got. A small-load concrete truck will pour the Sonotubes next week and make my life easier.

Looking for feedback:
Does my shoring, pier, and excavator-backup plan make sense, or am I missing anything?
Any recommendations on the best stone to set stringers on? Any other tips , tricks extra things I should consider? Do you think I should dig down an extra cement pier behind the stairs and add mid span support? It’s 10 stairs and never had one prior. I did add one on my other set of stairs I did but those were a much longer span.

Starting the day now—I’ll post an update tonight with how it goes. Appreciate any advice as I’ve gotten a lot of good help from this page in the past and if my mother-in-law bought a Ford to pay a professional to do what she would do it in a heartbeat, but it’s not in her budget. So the next best option that I had was for me to do it. She’s been a good mother-in-law, so she deserves it. I take pride in trying to do things the right way, and my most important thing is making sure that everything is safe. Although this is not my trade, I do consider myself pretty handy. and willing to learn. I feel by fixing this for her, it’s better than leaving it in the current condition where it was rotted posts, rotted boards up top, etc, with no way to get it fixed.

Since I also couldn’t afford to pay to have it fixed for her, all I could offer was my labor for free. In the end, this has cost about $3000 out of pocket for all materials and rentals, and I think it’ll be a big upgrade from what it was and a lot safer as many deck boards where getting so thin your foot could go threw it and the 4x4s would sway a bit as well as the stringers were bouncy and starting to pull off the rim joist since there’s no brackets. I hope to surprise her on her 70th birthday when she gets back in town and have it all finished up by next week.

Ps - pictures at the end is of the deck I fixed up at my house. If I was to do it again, I would not use those plastic post holders and I would tie everything indirectly to the framing much stronger that way but still learning. Also, the propane tanks have been removed, as I installed that mini split. It was a cantilevered deck prior, but with me adding the stairs, I felt that added a lot of weight, so I added the two support posts, now that I’m doing this deck and I’ve learned a little bit more, I’m doing the support post in 6 x 6s like I should’ve done on that one. definitely a learning process. I will probably go back and switch them to 6 x 6s at some point soon even know everything is solid on that one - took me the most time to do the landing pad and learn how to measure and cut stringers for my first time.


r/Construction • • 1d ago

Picture The city redid sidewalk corners and somehow managed to install an itch in my brain that I can’t scratch.

Post image
48 Upvotes

r/Construction • • 2d ago

Humor 🤣 Shut down because of a monkey .

254 Upvotes

We’ve been (trying) to do some reno work at a university the entire jobsite is currently on stand by because our hammer drilling was upsetting and orangutan they’re doing experiments on. They’re currently paying $160 an hour for me and the guy I’m with to sit in the truck while the GC argues and probably at least 4 other trades/ 20-30 works all just waiting. What is life


r/Construction • • 1d ago

Informative 🧠 How does telecom sign-off work for a new building in your country?

Thumbnail gallery
4 Upvotes

r/Construction • • 1d ago

Informative 🧠 Blue-collar guys: What kind of underwear are y'all wearing on long shifts, and what do you recommend?

39 Upvotes

For the guys working physical, blue-collar jobs (construction, warehouses, kitchens, mechanics, etc.)—what kind of underwear are you running with, and what brands/styles do you actually recommend?

​Between constant moving, sweating, bending, and grinding through long shifts, cheap pairs ride up, bunch, or wear out way too fast. Looking for something that actually breathes, stays put, and holds up over time without breaking the bank.

​Are y'all sticking with standard cotton briefs, boxer briefs, moisture-wicking athletic stuff, or specific brands like Duluth, Saxx, ExOfficio, Hanes, etc.? Drop your go-to recommendations and what works best for you.


r/Construction • • 19h ago

Other JCJ METAL FABRICATION AND CONSTRUCTION SERVICES

0 Upvotes

Hi po! Our home at Ovialand in San Pablo City, Laguna, was recently turned over, and we’re looking for a reliable contractor to build our fence and work on our kitchen.
Has anyone here hired JCJ METAL FABRICATION AND CONSTRUCTION SERVICES? We’ve spoken with them, but I haven’t found any photos of their completed kitchen projects with client reviews online. If you’ve worked with them, I’d appreciate hearing how it went. We already talked to a few contractors Theyve estimate of around ₱680,000 for the fence and kitchen, so we’d like to compare quotes. If you can recommend a contractor in San Pablo whom you’ve personally hired for similar work, please share their name, what they did for you, and roughly how much it cost, if you’re comfortable sharing.


r/Construction • • 2d ago

Careers šŸ’µ Those of you that work in the trades in unconventional fields; what do you do and do you enjoy it?

40 Upvotes

I've always been fascinated in the blue collar professions that are sort of out there. Carpenters that do set design for movies/TV, lighting riggers, stuff like that. I met a guy once at a bar that said he was a welder that worked for WWE (F at the time) building their stages and ramps and shit for special events and I thought that was super interesting. Not construction, but my dad was a mechanic and worked on several ProAm drag car teams over the years where he got paid but not enough to make a living for a family of 4.

Any of you work in an unconventional field?


r/Construction • • 2d ago

Careers šŸ’µ Laborers as contractors, wut?

29 Upvotes

(Canada) Buddy is trying to offer me a full-time gig as their laborer with an $1800 biweekly salary, but they don't pay my taxes or offer any benefits/whatever else. They claim I am being paid $25/hr, on-par with other laboring jobs in the area, but other laboring jobs have employer-paid taxes plus benefits for full-timers, which means I would also be on the hook for insurance and shit. Is this insane or am I reading in too much? Basically I am their employee but they pay me as a contractor because they don't want to pay taxes