r/Construction • • 20h ago

Video Concrete demolition with an ocean view — Carlsbad, California

185 Upvotes

A little footage from our beach access repair project in Carlsbad. The crew is breaking down the old reinforced concrete stairway supports, with the Pacific right behind them.

Hard work, but the view isn’t bad.

Edit:

The columns had to be brought down to a specified elevation. To prevent spalling, the crew removed the last few inches with handheld tools.


r/Construction • • 3h ago

Picture Thanks for y'all's anchor advice. Got the project wrapped up last week.

Thumbnail
gallery
65 Upvotes

Fire treated lumber and high-impact rated drywall went into it. Did finishing work with red oak countertops and maple baseboards painted the same color as the lobby tile. Anchors less than every 2' into the ground with a SST post anchor on the short wall.


r/Construction • • 10h ago

Picture Old foam can burst on a rainy day, finally got all the stains off this panel

Thumbnail
gallery
16 Upvotes

had two conduits going through a sandwich panel wall on a rainy day. grabbed an old can of spray foam to seal the penetrations and it suddenly burst out everywhere across the siding.

cured PU foam on grooved metal panels is a pain to get off without scratching the paint. took way longer than the actual conduit work, but finally got every trace off and put the caps on.

not naming the cleaner I used so it doesnt look like an ad.


r/Construction • • 2h ago

Tools 🛠 Hair protection

Post image
5 Upvotes

Does anyone have any recommendations for silk liners for hair protection from hardhats similar to this, i would be buying this one if it wasn’t sold out, I’ve gotten sick of hairline damage and damage in general from wearing a hardhat


r/Construction • • 14h ago

Other Electrician apprenticeship or Safety job while still in school for a bachelor’s in CM

4 Upvotes

Wassup guys. I basically have 3 and a half years left of my 4 year CM degree before I graduate. I’ve been looking to either start an apprenticeship as an electrician or get numerous certifications to start a safety job in construction while still in school. My girl and I just moved into a pretty nice apartment that costs some money so I was wondering if it’s worth it in the end to start an apprenticeship with the low amount of money that’s offered or to start with decent money working safety in construction. I’m in Georgia btw. Lmk what you guys think ! I would say I need to make at least $23 a hour but I’ve been seeing $17-$20 for apprenticeships. I’m about to turn 27 btw so I have grown man bills versus a teen or early 20 year old starting college.


r/Construction • • 53m ago

Informative 🧠 How to seal between two worm/rpe liners

1 Upvotes

Here is the photo of two liner between bog and pond area. The water is seeping into underneath the pond liner. How do I seal the area between that. Water can flow from bog, it can flow from rain or waterfall leakages

It’s too late to take out the liner. I am thinking to use any sealant to put in which is Epdm/RPE FRIENDLY and can fill the gaps in between


r/Construction • • 8h ago

Careers 💵 Moving from Bid Management into Pre-Construction – is it a smart career move?

1 Upvotes

UK-Based Hey everyone, I made this account solely for the purpose of getting advice from all of you, so whatever thoughts you'd have would be greatly appreciated!!

(Sorry for the essay you're gonna read below🤣🤣)

I've been working in the Construction industry for two years and in Bids for a little over a year now. I'm currently working in bids and tender coordination, as an Assistant Bid Manager, with experience supporting the preparation and submission of PQQs, ITTs and wider tender documentation.

I'm considering an opportunity to move into a Pre-Construction Coordinator role and would really appreciate some insight from people working in pre-construction, particularly those with experience in both areas.

A few things I'd be interested to hear your thoughts on:

Career progression:

Given my existing experience in bids, would moving into pre-construction be a good way to broaden my industry knowledge and develop my career?

Or could it potentially take me away from a more traditional bid management pathway?

Role differences:

How would you describe the main differences between bid management and pre-construction?

Where do the responsibilities overlap, and what additional knowledge or skills does pre-construction require?

Future opportunities:

What career paths can opening up experience in pre-construction lead to?

Could it provide a route into roles such as Pre-Construction Manager, Estimator, Bid Manager or wider project/commercial management?

Technical and mathematical skills:

How much maths is involved in pre-construction on a day-to-day basis?

Is it generally basic calculations, measurements, quantities and cost-related spreadsheets, or does it involve more advanced mathematical/technical knowledge?

Ultimately, I'm trying to establish whether this would be a worthwhile move for someone with a background in bids who wants to develop a broader understanding of the construction industry and keep their future career options open.

I'd appreciate any honest advice, experiences or things you wish you'd known when starting out. Thanks!


r/Construction • • 3h ago

Careers 💵 Business majors, especially finance or information systems, do you have any regrets? Would you do something else now?

0 Upvotes

I’m planning on transferring to the University of Florida for either finance or information systems. I already like what they do, so my main goal is pay. My ultimate goal is to reach 150k after 8-10 years of experience, without working 60+ hrs every week, so no IB/PE. I know it’s not what most people earn, but I know it’s achievable. I’m also a bit worried about AI, so I’ve been thinking about construction management too. What do you recommend?
For reference, I’m 19, have a 4.0 GPA,
and work as a supervisor at a pharmacy