r/CrealityFalconSub • • 1d ago

Project Showcase Be thankful for your father

Post image
1 Upvotes

Engraved canvas on a Falcon A1 10w


r/CrealityFalconSub • • 1d ago

Craft I Made When 3D printing meets laser cutting for Christmas! 🎄✨

Thumbnail
gallery
3 Upvotes

A new little project from the workshop to get ready for the holidays! 🎅🏠

I wanted to combine two techniques I love on a single piece: 3D printing for the crisp red Christmas tree frame, and laser cutting on wood for all the intricate details of the snowy little house inside.

  • Outer tree frame: 3D printed in red for clean depth and stability.
  • Inner winter cabin scene: Laser-cut wood to capture the fine details like the snow-covered roof, chimney smoke, and snowflakes.

The wooden insert press-fits right inside the printed frame. Really happy with how the warm wood tones contrast against the bright red!

Do you like this red and natural wood combo, or what other color combinations would you try (forest green, gold, white…)? 👇🎄

🛠️ Laser used for this project: I made this project with the Creality Falcon A1C 10W laser. If you want to check out the exact laser setup I'm using, you can find it here: https://crealityfalcon-laser.com/4iKa6DJ (Affiliate link)


r/CrealityFalconSub • • 1d ago

Project Showcase New box creation

Thumbnail gallery
5 Upvotes

Took a plan old box and started modifying. Made of 3mm basswood ply, cut on the Creality Falcon A1 10W, assembled and stained. Not sure about the stain color.


r/CrealityFalconSub • • 2d ago

Questions / Help Falcon T1 questions

1 Upvotes

I am seriously considering the new T1 laser engraver. I’ll be using it for metal engraving and cutting, so MOPA 60w laser seems to be the best choice.

Will light burn work with it?

What size is the vacuum port at the back?

I had used in the past a Galvo laser from an Italian company and it was very sensitive to movement, and it would requiere recalibration often. Will the T1 be sensitive as you do laser cartridge changes?

Thanks for any info!

Daniel


r/CrealityFalconSub • • 2d ago

Craft I Made Built a 520mm (20.5") interlocking Christmas streetlamp on a 150×150mm laser bed (Falcon A1C 10W)

Thumbnail
gallery
3 Upvotes

J'ai fabriqué cette lampe de Noël en bois avec une Creality Falcon A1C de 10 W.

L'une des contraintes amusantes était de la réaliser en hauteur jusqu'à 520 mm (20,5 pouces) tout en travaillant dans un espace de plateau de 150 × 150 mm.

Chaque pièce est conçue pour s'emboîter comme un puzzle, et j'ai ajouté une lumière LED en haut pour une jolie ambiance festive.

Je peaufine encore les détails pour la décoration de Noël !

🛠️ Laser used for this project: I made this project with the Creality Falcon A1C 10W laser. If you want to check out the exact laser setup I'm using, you can find it here: https://crealityfalcon-laser.com/4iKa6DJ (Affiliate link)


r/CrealityFalconSub • • 2d ago

Project Showcase Laser cleaning a 1937 Chevy… would you keep the rust or remove it? 👀​

1 Upvotes

r/CrealityFalconSub • • 3d ago

Questions / Help Tumbler settings

1 Upvotes

I have some colored powder coated stainless steel tumblers. What power setting is recommended and should I choose metal- stainless steel cup? That doesn’t feel like the right sub category. Also shouldn’t it come out silver, not black?
Ugh I’m such a noob.


r/CrealityFalconSub • • 4d ago

Project Showcase Wood inlay clock

Post image
2 Upvotes

This wood inlay clock has a face of Missouri red oak, and the numerals, dots, and hands are purpleheart wood.


r/CrealityFalconSub • • 4d ago

Project Showcase Bringing an old rusty stove back to life with a laser. 🔥

1 Upvotes

r/CrealityFalconSub • • 4d ago

Questions / Help 5W - air assist question

Thumbnail
gallery
1 Upvotes

So I picked up the 5W Creality falcon to try to learn more about laser engraving and cutting. I saw so many people talk about adding the air assist, so I picked that up and got it fitted. Now I am trying to figure out my settings since the air assist nozzle sticks lower than the pre-fixed focus.

Has anyone made this work or do I just need to take the air assist off and save it for some different laser in the future.


r/CrealityFalconSub • • 6d ago

Questions / Help Creality Falcon A1 failing

1 Upvotes

I have a Falcon A1 which is just over a year old. I was cutting some wood today and at about the 99% mark it stopped cutting - half way through the last line.

Now it won't cut or engrave. The head moves to where I think it would start cutting. But then the inside light flicks off for about a second, then comes on again and the unit beeps twice.

Any suggestions on how to proceed?


r/CrealityFalconSub • • 6d ago

Questions / Help Falcon a1 pro rotary kit

2 Upvotes

Hi all. I’m trying to engrave on a small rolling pin. The pin itself is 5inches and the print area is 3 inches. My issue is that the jaws of the chuck are in the way when I try to print. Is there an easy way to mount the rolling pin without having to take it out mid print and flip it around?
I can’t imagine people are engraving on small items such as rings and things using this base kit. Do I need something additional to be able to fix my item in a way where things aren’t blocking the laser? Thank u!


r/CrealityFalconSub • • 6d ago

Questions / Help Falcon 10w Doesn't Work

1 Upvotes

I bought this back in August, but finally got around using it, but this is all it does. I tried a USB-C to USB-C Cable and a USB-A to USB-C Cable, and 2 different SD Cards. it doesn't seem to matter.

Any idea what is wrong?


r/CrealityFalconSub • • 6d ago

Work in Progress Basic Cribbage

Thumbnail gallery
4 Upvotes

Basic design done, now to refine it.


r/CrealityFalconSub • • 7d ago

Beginner Smokey

Thumbnail
reddit.com
1 Upvotes

r/CrealityFalconSub • • 7d ago

Parameter Settings Creality Falcon designer and A1C gripes

Thumbnail reddit.com
1 Upvotes

r/CrealityFalconSub • • 7d ago

Project Showcase More psychedelic engraving

1 Upvotes

r/CrealityFalconSub • • 7d ago

Project Showcase Psychedelic engraving

Post image
1 Upvotes

Falcon A1 10w


r/CrealityFalconSub • • 7d ago

Project Showcase Alignment guides for Creality Falcon A1 Pro

Thumbnail
gallery
5 Upvotes

I've created parametric guides to center any object on the Creality Falcon A1 Pro's tray.

Download the STL/3mf free on Creality Cloud:

https://www.crealitycloud.com/es/model-detail/creality-falcon-a1-pro-alignment-guides

These guides allow you to position objects in the same way every time, preventing them from shifting during repetitive engraving and cutting tasks. Simply remember the number of side and bottom guides required for each application and tighten them to ensure the object remains firmly in the same position when switching to similar pieces for engraving/cutting.

The guides are placed in different locations; some are specifically for the outer frame, and others for the inner area. The inner guides come in two widths: 2 cm and 1 cm.

These guides have 6x2 magnets on their underside that are added later by applying pressure (the holes have a very tight tolerance so that glue is not needed and they have holes that allow a nail to be inserted to remove the magnets), to ensure that they adhere to the metal sheet of the tray and have a very low height that does not interfere with the laser head.

The 3mf file contains all the guides, placed upside down so that the top surface (where each guide's label is located) will have the texture of the print bed. You can print as many guides as you need for each application. I've also included a second 3mf guide with small 12x2 magnet guides to hold the JIGs.

In the photos, you can see that in addition to the guides, I have 0.5mm aluminum sheets on the tray with crosshairs marked on them with a marker. These crosshairs indicate the center position of the camera lens and the point where the laser for the A1 Pro's autofocus hits. I used these sheets for testing until I achieved optimal calibration and for engravings that need to cover the entire front surface of an object and extend beyond the margins, thus avoiding marking the original print tray.

I hope you find this useful and that it helps you use the Creality Falcon A1/A1 Pro more easily and efficiently for repetitive tasks.


r/CrealityFalconSub • • 8d ago

Small Business For those of you selling digital laser cutting files, which platforms do you use?

Thumbnail reddit.com
2 Upvotes

r/CrealityFalconSub • • 8d ago

Project Showcase Weld it. Cut it. Clean it. All with one handheld laser. 🤯​

1 Upvotes

r/CrealityFalconSub • • 9d ago

Questions / Help AYUDAAAAA POR FAVOR CON MI CREALITY FALCON A1 PRO 20W

0 Upvotes

Hola a todos, estoy iniciándome en el corte y grabado láser y tengo una Creality Falcón A1 Pro de 20W, quiero cortar nombres, estoy usando MDF de 3mm y no logro cortar nada, la máquina solo me graba y delinea la imagen, he usado los parámetros que trae el soft y nada. Ayuda


r/CrealityFalconSub • • 9d ago

Project Showcase Falcon T1 + 60W MOPA engraves incredibly fast if you are used to cartesian diode lasers

8 Upvotes

Engraving a spirograph on a metal business card at 8000mm/s. The patterns also look cool when engraved with a diode laser but the T1 is obviously much faster. You can generate the patterns there.


r/CrealityFalconSub • • 9d ago

Craft I Made Winter Lamp

Thumbnail
gallery
5 Upvotes

I tried something a little different with colored lantern paper for this winter project.
Normally, I use lantern paper behind designs that I cut out of wood. This time, I decided to engrave the lantern paper itself and make the paper the main part of the design.

The interesting part is how the paper reacts to the laser. Instead of getting darker like a normal engraving, the engraved areas lose their color and turn almost white. That works really well for winter scenes, especially for snow, trees and other bright details on a colored background.

I used my Falcon2 Pro in 22W Precision Mode for the paper:
6000 mm/min, 20% power

To keep the lantern standing nicely, I also made a small round base from solid wood. For that I switched the machine back to 40W mode and cut the stand at:
120 mm/s, 100% power, 1 pass

That was enough to cut through the wood in a single pass.


r/CrealityFalconSub • • 9d ago

Questions / Help overheating help

0 Upvotes

hey yall, hoping i can get some help with an issue that just started up today. i have a falcon a1 pro, been putting it to work lately but today it started giving me an overheating alert. this is the first time ive seen it. ive had days where ive ran it for almost the entire day with no issues like that. today i barely could make it through a 30 minute project without it stopping. i cleaned the fan and laser as best i could (im still a little new so let me know if theres a cleaning technqiue i NEED to be doing). but even after cleaning it still gave me the alert. i use the falcon design space program for my files and i know they just had an update idk if THAT could be causeing something. wouldnt THINK it would but could be something idk.