r/Detailing • u/Ecstatic_Trip_8305 • 13h ago
r/Detailing • u/ClassicMembership517 • 3h ago
I Have A Question Recommendations for car detailing products
Hello! I am starting a small detailing business on the side. What are some products and tools you would recommend? If anyone could give me a very detailed response with links, or a link to a guide that would be great!! No need to worry about price, I'm just looking for the best possible options, thank you 😊
r/Detailing • u/Ecstatic_Camera9702 • 14h ago
I Have A Question Which pads should I get for 3D one?
I have marrying and swirls in my black paint. I want to remove them. Basic 1 step.
Which pad or pads should I get ?
r/Detailing • u/nannajayy • 17h ago
I Have A Question What IS this stuff on my black paint? It comes off if I scratch it with my nail.
My car is a 2009 Nissan so I’m sure this is normal for its age and its color, but I can’t figure out exactly what it is.
It’s only on the back of my trunk & the top of my car. It shows up in somewhat circular spots.
In the first two pictures you can see where I took my nail & scratched some of the white stuff off — so I don’t think it’s my paint/clear coat — I think it’s sitting on top of it. I didn’t try to scrape off anymore, I just did a small spot to test it.
Initially I thought it was just serious hard water stains/calcium build up, so I took a hot microfiber towel, let it sit on one of the spots to “soften” it up & scrubbed it using diluted soap & a soft sponge. It did little to nothing.
Being a female I’m pretty handy, know how to use power tools, can run a miter saw, stuff like that (lol) & dated a guy whose parents owned a detail shop for 5 years so I’m pretty familiar with a lot of things.
But I can’t figure this out. Any suggestions?
r/Detailing • u/10XL • 17h ago
I Need Help! (Time Sensitive) Is my 8 year-old Alcantara steering wheel beyond saving?
Hi everyone,
I’ve recently bought a 2018 Audi RS3 (8V) and I’m looking for advice on restoring the Alcantara steering wheel. I’ve only had the car for around a month.
What I’ve done so far:
- Cleaned using a microfibre cloth and warm water.
- Applied Sonax Alcantara and Upholstery Cleaner.
- Allowed it to dry completely.
- Brushed the material in one direction, then slightly upwards to loosen and lift the fibres.
- Repeated this process several times over the past two weeks.
The cleaning process has made a significant difference to how soft the material feels, but I’m struggling with the appearance and texture.
As shown in the photos, brushing the material flat in one direction gives it a much smoother appearance (second set of photos). However, running your hand in the opposite direction brings up the uneven, raised and almost frayed texture shown in the first set.
Brushing also seems to release small amounts of loose material. The improvement doesn’t last with normal use.
I haven’t used any sanding pads, abrasives or fabric shavers.
My questions:
- Is this beyond saving, or can the original Alcantara realistically be restored?
- Is there anything else worth trying?
- Can a pro detailer save this or should I expect a full retrim as my only viable option?
I’d ideally like to save the original material if possible.
Appreciate any advice!
r/Detailing • u/mr-moderation • 17h ago
I Have A Question How clean a spot on leather seat
I recently bought a 2023 Audi Q5. There’s a spot on the passenger seat. The seat overall is matte and textured. The area with the spot is mostly smooth. I’m not sure if it’s even “cleanable.” Any ideas?
r/Detailing • u/Present-Account6860 • 17h ago
Work Product- Look At What I Did Update to my post from a few days ago. Before and After.
Turned out that someone tried to DIY ceramic coat and it went bad. Used Jax Wax Scratch Remover by hand for about four hours until my boss said it would take too long to do the rest of the car and gave it to a specialist with a buffer.
r/Detailing • u/SoFreshNSoClean217 • 1h ago
I Have A Question Best pre wash for quick rinses for winter
WHICH IS BETTER? For winter time and knocking off the snow or the salt or it just being code outside for quick washes then rinsing off and walking away? Bilt chamber touchless or Koch chemie green star? I plan on mixing di water in weed pump sprayer sense winter is coming.
r/Detailing • u/False-Elk9564 • 21h ago
Work Product- Look At What I Did 1966 Chrysler Newport clean up
Nothing crazy. Just wanted to clean up this original single-stage paint without eating it all away. Good enough for a land yacht.
r/Detailing • u/curious-moose-1994 • 5h ago
I Have A Question How Much BH Touch-Less V2 Are You Putting in Your Foam Cannon?
Hey everyone,
I’m new to home detailing and trying to dial in my pre-wash setup and work out my actual Panel Impact Ratio (PIR).
I’m running an Active 2.3 with the Active Foam Cannon and 1.45 orifice. My first bucket test gave me a total output of around 31 litres/6.8 gallons (need to redo the test as it seems quite high compared to what I’ve seen online!).
For those running similar setups, how many ml of Touch-Less V2 are you putting in your 1L foam cannon bottle, and what PIR are you achieving?
All experiences welcome. Thanks!
r/Detailing • u/bleicht • 6h ago
I Need Help! (Time Sensitive) Interior Door Damage - VolvoXC60
Returning a leased car next month and noticed a small tear inside the back door. It feels like the material is foam or plastic.
Are there any quick fixes?
Brian
r/Detailing • u/Electrical-Dance-204 • 9h ago
I Have A Question Ozone generator smell (need help, please)
I just got my car (suv) detailed today and they used an ozone treatment as well. They said they ran it for 3 hours and left it to air out for one. My car smells like an awful chemical soup. Like Chlorine and bleach. I aired my car out again when I got home but every time I lock the car up and open it again, the smell is just as strong. Any recommendations on how I can eliminate this terrible , toxic odor? I am also researching and now discovering after the fact that three hours is a LONG time to run an ozone generator but I trusted the detailer when I dropped off my car. To say the least, I’m worried. Do I need to replace cabin air filter, etc? Has anyone dealt with this before. Any help is very, very appreciated!