r/Detailing • • 1h ago

I Need Help! (Time Sensitive) Removing smell from car interior

1 Upvotes

I ran over a dead skunk about 2 nights ago, I cleaned my undercarriage as much as I could and it helped remove most of the smell except for the exhaust area, as far as the interior I used Ozium and the interior has more of a weed smell than the strong burnt rubber smell. Anybody know what I can use to fully remove the smell from the inside?


r/Detailing • • 2h ago

I Have A Question Washing Car in Garage during Minnesota Winters

4 Upvotes

I just got a new car and want to take care of the finish. It's white. My strategy for my MN winter is as follows. If you see anything I should change please reply. I got most of this from chatgpt.

  1. Rinse in a car wash bay nearby to remove salt and most dirt.
  2. Drive home to my heated garage with epoxied floor and no drain.
  3. Use ONR no rinse wash in 5 gal bucket with about 10 Eaglet 500 8x8 towels to clean 1 panel at a time. Work top to bottom.
  4. Dry each panel immediately after cleaning using Liquid8r towels.
  5. Squeegee any excess liquid off floor.

I'm considering a pump sprayer to apply some wash before using the towel.

Is this a sound approach to cleaning during freezing weather?


r/Detailing • • 3h ago

I Have A Question Rough surface on a leftover inventory

Thumbnail
gallery
4 Upvotes

Hello!

I bought a new black 2026 Kia Carnival last week. Built in January 2026, so it’s probably been sitting outside on a lot for almost a year.

I noticed that some panels felt quite rough, like sandpaper or cardboard when I ran my hand over them. I guess it would be water spots or something, so I tried clay bars. Most of it came off, but the tailgate is pretty bad. Nearly 2/3 of the panel is covered by this and claying it a few times hasn’t really done anything.

Then I noticed this straight line where the rough area ends. Easier to see at night with a light on it.

Any idea what I’m looking at here? What would leave this large rough area with a straight end like that, and how do I get rid of it? Thanks!


r/Detailing • • 4h ago

I Have A Question Weird PPF texture unknown film

Thumbnail
gallery
1 Upvotes

Hey guys! STEK PPF installer here. I’m doing a detail on this ZR1X and it has full body install. Unknown film, unknown installer. Was curious if anyone has seen this weird line texture in film before. It’s like tack lines but much more subtle and incredibly uniform, as if it’s out of manufacturing. Maybe someone can say if they’ve seen this in a film brand before?


r/Detailing • • 4h ago

I Have A Question White marks on exterior plastic

Thumbnail
gallery
1 Upvotes

Hiya.

I have a Hyundai Kona and noticed white marks after washing my car at a self wash. Appeared months ago, and indeed I waxed the car using the liquid wax at the self wash at that time.

Since then I tried everything to try and remove it, and now I’ve reached a point where I give up cause honestly I think I made it even worse. Tried an eraser, all purpose cleaner, dish soap with warm water, solution for plastic, nothing worked - at this point it feels like it’s not just a “spot” and more like it’s “embedded” into the plastic.

Can a professional detailer fix it? And I’m not saying like applying a quick shine that lasts a few months and then it gets back to this state again. Something that is permanent and prevents me from replacing the whole plastic part.

Thanks very much!


r/Detailing • • 4h ago

I Have A Question Best pre wash for quick rinses for winter

2 Upvotes

WHICH IS BETTER? For winter time and knocking off the snow or the salt or it just being code outside for quick washes then rinsing off and walking away? Bilt chamber touchless or Koch chemie green star? I plan on mixing di water in weed pump sprayer sense winter is coming.


r/Detailing • • 6h ago

I Have A Question Does it still count as detailing if the paint is fresh? Just wet sanded and buffed my truck.

Post image
1 Upvotes

r/Detailing • • 6h ago

I Have A Question Recommendations for car detailing products

0 Upvotes

Hello! I am starting a small detailing business on the side. What are some products and tools you would recommend? If anyone could give me a very detailed response with links, or a link to a guide that would be great!! No need to worry about price, I'm just looking for the best possible options, thank you 😊


r/Detailing • • 8h ago

I Have A Question How Much BH Touch-Less V2 Are You Putting in Your Foam Cannon?

2 Upvotes

Hey everyone,

I’m new to home detailing and trying to dial in my pre-wash setup and work out my actual Panel Impact Ratio (PIR).

I’m running an Active 2.3 with the Active Foam Cannon and 1.45 orifice. My first bucket test gave me a total output of around 31 litres/6.8 gallons (need to redo the test as it seems quite high compared to what I’ve seen online!).

For those running similar setups, how many ml of Touch-Less V2 are you putting in your 1L foam cannon bottle, and what PIR are you achieving?

All experiences welcome. Thanks!


r/Detailing • • 9h ago

I Need Help! (Time Sensitive) Interior Door Damage - VolvoXC60

Post image
1 Upvotes

Returning a leased car next month and noticed a small tear inside the back door. It feels like the material is foam or plastic.

Are there any quick fixes?

Brian


r/Detailing • • 12h ago

I Have A Question Vacuum cleaner & high flow pressure washer

1 Upvotes

Hi,

I'm looking for a pressure washer suitable for washing at least 4 cars per day, specifically for professional car detailing.

I'm finding it difficult to choose between all the different brands and models. Second-hand equipment is also fine, but I'd like to know which brands are reliable and suitable for intensive daily use.

Would I need any additional spray nozzles or accessories?

I'm also looking for a suitable vacuum cleaner for professional car detailing.

My budget for both machines combined is around €500, but feel free to recommend more expensive options as well, as I'll also be checking the second-hand market. Im buying in the Netherlands! So please somethinf available here, is bigboi good ?

Thanks in advance!


r/Detailing • • 12h ago

I Have A Question Ozone generator smell (need help, please)

3 Upvotes

I just got my car (suv) detailed today and they used an ozone treatment as well. They said they ran it for 3 hours and left it to air out for one. My car smells like an awful chemical soup. Like Chlorine and bleach. I aired my car out again when I got home but every time I lock the car up and open it again, the smell is just as strong. Any recommendations on how I can eliminate this terrible , toxic odor? I am also researching and now discovering after the fact that three hours is a LONG time to run an ozone generator but I trusted the detailer when I dropped off my car. To say the least, I’m worried. Do I need to replace cabin air filter, etc? Has anyone dealt with this before. Any help is very, very appreciated!


r/Detailing • • 13h ago

I Need Help! (Time Sensitive) How to clean antifreeze/coolant spill in trunk and back seats

3 Upvotes

I recently discovered that a bottle of antifreeze spilled in my trunk it’s been sitting maybe a week?It seeped through the back seats. I put some cat litter back there to absorb the liquid but am not sure how to clean it from here. I’m considering taking it to a hand car wash and using their brushes and water hose to clean the mats and carpet if the back part is removable.

Please share some tips on how to do this! Thanks


r/Detailing • • 16h ago

I Have A Question Would you guys buy this Meguiar’s deep crystal wash even with this weird blue stuff at bottom?

Post image
4 Upvotes

r/Detailing • • 17h ago

I Have A Question Which pads should I get for 3D one?

1 Upvotes

I have marrying and swirls in my black paint. I want to remove them. Basic 1 step.

Which pad or pads should I get ?


r/Detailing • • 19h ago

I Have A Question Unknown age of my ceramic sealant

1 Upvotes

I bought a 2014 jeep wrangler last year and the paint still looks amazing! There's a sticker on my windshield from a detail shop that says do not wax ceramic sealant. When I called business on the sticker I found out they're out of business. The guy I bought my jeep from owned it for 6 yrs and the sticker was on the windshield when he bought it. He said all he's done was just running it through the carwash and kept it in the garage. What do I need to do to keep it protected and looking good? I'm a plumber and auto detailing is out of my wheel house so any advice will be greatly appreciated..


r/Detailing • • 20h ago

I Have A Question What IS this stuff on my black paint? It comes off if I scratch it with my nail.

Thumbnail
gallery
2 Upvotes

My car is a 2009 Nissan so I’m sure this is normal for its age and its color, but I can’t figure out exactly what it is.

It’s only on the back of my trunk & the top of my car. It shows up in somewhat circular spots.

In the first two pictures you can see where I took my nail & scratched some of the white stuff off — so I don’t think it’s my paint/clear coat — I think it’s sitting on top of it. I didn’t try to scrape off anymore, I just did a small spot to test it.

Initially I thought it was just serious hard water stains/calcium build up, so I took a hot microfiber towel, let it sit on one of the spots to “soften” it up & scrubbed it using diluted soap & a soft sponge. It did little to nothing.

Being a female I’m pretty handy, know how to use power tools, can run a miter saw, stuff like that (lol) & dated a guy whose parents owned a detail shop for 5 years so I’m pretty familiar with a lot of things.

But I can’t figure this out. Any suggestions?


r/Detailing • • 20h ago

I Have A Question How clean a spot on leather seat

Post image
3 Upvotes

I recently bought a 2023 Audi Q5. There’s a spot on the passenger seat. The seat overall is matte and textured. The area with the spot is mostly smooth. I’m not sure if it’s even “cleanable.” Any ideas?


r/Detailing • • 20h ago

I Need Help! (Time Sensitive) Is my 8 year-old Alcantara steering wheel beyond saving?

Thumbnail
gallery
55 Upvotes

Hi everyone,

I’ve recently bought a 2018 Audi RS3 (8V) and I’m looking for advice on restoring the Alcantara steering wheel. I’ve only had the car for around a month.

What I’ve done so far:

  1. Cleaned using a microfibre cloth and warm water.
  2. Applied Sonax Alcantara and Upholstery Cleaner.
  3. Allowed it to dry completely.
  4. Brushed the material in one direction, then slightly upwards to loosen and lift the fibres.
  5. Repeated this process several times over the past two weeks.

The cleaning process has made a significant difference to how soft the material feels, but I’m struggling with the appearance and texture.

As shown in the photos, brushing the material flat in one direction gives it a much smoother appearance (second set of photos). However, running your hand in the opposite direction brings up the uneven, raised and almost frayed texture shown in the first set.

Brushing also seems to release small amounts of loose material. The improvement doesn’t last with normal use.
I haven’t used any sanding pads, abrasives or fabric shavers.

My questions:

  1. Is this beyond saving, or can the original Alcantara realistically be restored?
  2. Is there anything else worth trying?
  3. Can a pro detailer save this or should I expect a full retrim as my only viable option?

I’d ideally like to save the original material if possible.

Appreciate any advice!


r/Detailing • • 20h ago

Work Product- Look At What I Did Update to my post from a few days ago. Before and After.

Thumbnail
gallery
2 Upvotes

Turned out that someone tried to DIY ceramic coat and it went bad. Used Jax Wax Scratch Remover by hand for about four hours until my boss said it would take too long to do the rest of the car and gave it to a specialist with a buffer.


r/Detailing • • 1d ago

Work Product- Look At What I Did 1966 Chrysler Newport clean up

Thumbnail
gallery
11 Upvotes

Nothing crazy. Just wanted to clean up this original single-stage paint without eating it all away. Good enough for a land yacht.


r/Detailing • • 1d ago

I Have A Question Dried coffee under seat, clean now or in summer

2 Upvotes

So my wife had a travel cup of coffee in my car. I’ve just found it under the seat, must’ve rolled under. But it’s leaked dregs of coffee.

I’ve had a musty smell in the car for a while and I’m guessing it’s this.

Anyway

It’s currently below freezing in the UK. Do I leave the dried coffee until Summer or is there a DIY way to get it out and dry it without making my car damp.

I have loads of products and a cheap wet/dry shop vacuum.


r/Detailing • • 1d ago

I Have A Question Does anyone have success stories in there detailing Bussiness’s

0 Upvotes

Does anyone have success stories in their detailing Bussiness’s in smaller city’s with population with like 10-20K?
If so what’s the numbers look like?
Yearly revenue
Customers a day/week
Is it worth it or do you wish you were located in a bigger city with 100k+ population?


r/Detailing • • 1d ago

I Have A Question Is there anything I can do? Car is sentimental. Looks like clear coat failure.

Thumbnail
gallery
5 Upvotes

2016 Audi Q5. This was my dad’s car. I bought it from my evil narcissist stepmother when he passed away from bile duct cancer about 1.5 years ago. I just noticed these two spots after a thorough wash and decon to prepare for a round of polish and sealant before winter.

If it isn’t something I can tackle easily, I’m willing to take it to a shop. I’ve invested a lot in this car and plan to keep it for at least another 10 years. I thought German cars had tough clear coats. If it isn’t something that can be remedied easily or adorably, is there a way to prevent it from getting worse while I save up the cash?

Thank you.