r/EngineeringPorn • u/VEC7OR • 2h ago
r/EngineeringPorn • u/aloofloofah • Feb 22 '22
No Politics
Please note that in light of current events we will be removing all posts of war machines, war planes, war ships, etc. of Russian or Ukrainian origin to keep /r/EngineeringPorn apolitical, propaganda-free, and civil. Please report any posts or comments that are not in the spirit of this subreddit.
r/EngineeringPorn • u/Early_Teaching6966 • 1d ago
My TV got hit and became unusable: the picture cut out every 50 seconds and a dark line ran down the screen. Instead of replacing the panel, I fixed it from inside the TV's own software
After an impact, my 77" Samsung OLED had two problems: the picture kept switching itself off (sound still playing), at worst every 50 seconds, and a dark line ran down the screen.
It turned out the TV's own panel controller, the chip that drives every column of pixels, was reacting badly to the damaged spot:
- Blackouts: a built-in safety check kept failing on the damaged columns and shutting the picture off. The controller has its own "skip these columns" switch; I turned it on for just the damaged area. 24 of 24 restarts without a blackout since.
- The line: OLED TVs measure their pixels in standby and boost the weak ones. The damaged columns gave a false reading, so the TV never boosted them. I adjust that reading just for the TV's own measurement, and the TV boosts them and saves the fix itself. The line now matches its neighbours to within 1–2% from mid-greys up.
No parts replaced, no firmware changes. It's not perfect (very dark greys on the line are a little yellow) and the damage is still there; the TV just handles it properly now.
Prerequisite: root access. Both TV-side fixes require a working root shell on your own TV. Use the S95F rooting toolkit and its root setup guide, then verify your TV root session. Firmware decryption is not required for either fix.
Pictures of the line before and after are in the link.
Full write-up, measurements and code: https://github.com/TheMHD1/samsung-s95f-display-lab
Hobby project on my own TV, nothing for sale. Writing to the panel controller can brick a TV and voids the warranty.
r/EngineeringPorn • u/bricktrials • 1d ago
Ten door mechanisms in LEGO Technic, all on a single motor each. Worm drives, racks, chains and a 6-blade iris
Wanted to see how many different opening mechanisms fit the same door frame with just one motor each. Worm drives do most of the heavy lifting, the revolving door runs through a 72:1 train so it turns nice and slow, the shutter rolls up on chains, and the iris has 6 blades geared together on 40-tooth gears so they all move as one.
Every door gets an x-ray pass showing the drive inside.
Which one would you trust as a real door? Thanks for the support 🙏
r/EngineeringPorn • u/placeSun • 22h ago
NEW Opel Astra Production in Germany – How It’s Made at the Rüsselsheim Factory
r/EngineeringPorn • u/VEC7OR • 1d ago
Water Jet Loom Weft Yarn Insertion in Slow Motion
r/EngineeringPorn • u/OrneryProfit659 • 1d ago
Visualizing the wake and dynamic stall of a passive-pitch Vertical Axis Wind Turbine (VAWT)
I've been working on an FSI (Fluid-Structure Interaction) simulation of a cycloturbine with a centrifugal-pendulum pitch control system.
Instead of fixed blades, these blades pitch freely within +/- 45-degree stops. The centrifugal forces of the rotation naturally balance against the aerodynamic loads to keep the blades at an optimal angle of attack.
In this velocity magnitude plot (TSR = 3.0), you can see the complex wake interaction between the three blades. The bright red/white regions near the blades are the Leading Edge Vortices (LEVs) forming and shedding—this is dynamic stall at work, which is essentially what keeps these turbines generating torque at lower tip-speed ratios.
Getting the strongly-coupled FSI (where the fluid moves the blade, and the blade moves the fluid) to remain stable over 12 revolutions was a challenge, but the periodic convergence is beautiful.
The whole physics engine and verification suite is open-source if anyone wants to look at the math behind it.
r/EngineeringPorn • u/Bright-Wafer9089 • 18h ago
Pretty interesting video on the crazy roof at the Mercedes Benz stadium. Interesting.
instagram.comr/EngineeringPorn • u/Lydia_SteelExpert • 2d ago
Water, steam, and a red hot billet between the rolls
The water isn't cooling it — that's descaling, and it's the difference between clean surface and rolled-in defects.
r/EngineeringPorn • u/entropicflop • 4d ago
View from the tower. The speed is still rather fast
r/EngineeringPorn • u/KingKohishi • 3d ago
TIL about Lavkh - probably the most intricate thing I've ever seen made from a single slab
r/EngineeringPorn • u/GeorgeRobertVitkos • 3d ago
Winding a clock mainspring using a specialized winder
r/EngineeringPorn • u/Legitimate_Mark6103 • 2d ago
From the Blacksmith community on Reddit: My Davinci Cam Hammer
All right, tear me apart. If you wanna see it in action, give me a follow and watch me work some hot steel with it. I'm also building a 2.0 model that's gonna be upgraded. I know, I know. How could you upgrade this lol? Thanks for watching
r/EngineeringPorn • u/gurselgunacar • 3d ago
Eiffel Tower, from the summit to the steam pumps underground
I built a Three.js cutaway of the Eiffel Tower, The tricky part was scale. I wanted you to see the whole 300 m tower, then get close enough to watch a single piston move.
I built this with GPT 6.2 Astra, using historical drawings of the 1889 lifts as references. Try opening the lift valve in the pressure-map view. You can watch the water flow change and see how the lift car responds.
https://www.meptasarim.com/eyfel-yeralti-pompa-dairesi-simulator.html
r/EngineeringPorn • u/HiddenInternals • 5d ago
Knolled layout of a 1980s Sony Microcassette Recorder (M-88V), featuring its miniaturized belt drive and brass capstan flywheel [OC]
r/EngineeringPorn • u/DakotaLazarus • 4d ago
Hydrostatic proof test on one of our power module components, run to 3,600 psi
We’re an engineering team in El Segundo building 5 MW power modules around a supercritical CO₂ power block. Every pressure-containing component is proof tested before it goes into the module.
This one got a hydrostatic test. We filled it with water and stepped the pressure up in stages, holding at each level to watch the gauge for pressure decay and inspect the part for leaks. It ran all the way to 3,600 psi.
We use water because it’s nearly incompressible and stores very little energy under pressure, which makes a failure much safer to find on the test stand.
Happy to answer questions, ones we can!
r/EngineeringPorn • u/Connect_Cat_2045 • 5d ago
Missing tile on STS-27 vs Starship Flight 15
r/EngineeringPorn • u/Automatic-Bowler-538 • 5d ago
Three SO-101 robot arms move one ball through tracks, a cup and salt using replay, vision and learned control [OC]
A lap through Almost Alive, an installation we built around three different control methods. The clip uses camera cuts and includes a mistake.
Echo replays recorded poses to tip the rocking track. Iris detects the orange ball in its cup, then replays the transfer motion and signals Echo. Bandit retrieves the ball from salt, where the pickup position varies, using a policy learned from demonstrations.
We collected 115 leader-arm demonstrations and trained ACT and diffusion models with LeRobot. Two camera images and the arm's position are inputs; a sequence of movements is the output. The learned pickup is slow and imperfect.
Original film and discussion: https://x.com/pbshgthm/status/2122679067065598015
Credits: SO-101 design by TheRobotStudio; hardware from Seeed Studio; learning software from Hugging Face LeRobot; track models by Tabu Design.
r/EngineeringPorn • u/placeSun • 5d ago
How Liebherr PR 776 Bulldozer Tracks Are Installed | Inside the Austrian Factory
r/EngineeringPorn • u/entropicflop • 6d ago