r/EngineeringPorn • • 4h ago

of potatoes storage

610 Upvotes

r/EngineeringPorn • • 1d ago

My TV got hit and became unusable: the picture cut out every 50 seconds and a dark line ran down the screen. Instead of replacing the panel, I fixed it from inside the TV's own software

Thumbnail
gallery
105 Upvotes

After an impact, my 77" Samsung OLED had two problems: the picture kept switching itself off (sound still playing), at worst every 50 seconds, and a dark line ran down the screen.

It turned out the TV's own panel controller, the chip that drives every column of pixels, was reacting badly to the damaged spot:

  • Blackouts: a built-in safety check kept failing on the damaged columns and shutting the picture off. The controller has its own "skip these columns" switch; I turned it on for just the damaged area. 24 of 24 restarts without a blackout since.
  • The line: OLED TVs measure their pixels in standby and boost the weak ones. The damaged columns gave a false reading, so the TV never boosted them. I adjust that reading just for the TV's own measurement, and the TV boosts them and saves the fix itself. The line now matches its neighbours to within 1–2% from mid-greys up.

No parts replaced, no firmware changes. It's not perfect (very dark greys on the line are a little yellow) and the damage is still there; the TV just handles it properly now.

Prerequisite: root access. Both TV-side fixes require a working root shell on your own TV. Use the S95F rooting toolkit and its root setup guide, then verify your TV root session. Firmware decryption is not required for either fix.

Pictures of the line before and after are in the link.

Full write-up, measurements and code: https://github.com/TheMHD1/samsung-s95f-display-lab

Hobby project on my own TV, nothing for sale. Writing to the panel controller can brick a TV and voids the warranty.


r/EngineeringPorn • • 1d ago

NEW Opel Astra Production in Germany – How It’s Made at the Rüsselsheim Factory

Thumbnail
youtube.com
3 Upvotes

r/EngineeringPorn • • 1d ago

Ten door mechanisms in LEGO Technic, all on a single motor each. Worm drives, racks, chains and a 6-blade iris

Thumbnail
youtu.be
8 Upvotes

Wanted to see how many different opening mechanisms fit the same door frame with just one motor each. Worm drives do most of the heavy lifting, the revolving door runs through a 72:1 train so it turns nice and slow, the shutter rolls up on chains, and the iris has 6 blades geared together on 40-tooth gears so they all move as one.

Every door gets an x-ray pass showing the drive inside.

https://youtu.be/RM-vE_zaCfA

Which one would you trust as a real door? Thanks for the support 🙏


r/EngineeringPorn • • 2d ago

Water Jet Loom Weft Yarn Insertion in Slow Motion

Thumbnail
youtube.com
46 Upvotes

r/EngineeringPorn • • 1d ago

Visualizing the wake and dynamic stall of a passive-pitch Vertical Axis Wind Turbine (VAWT)

Thumbnail
github.com
3 Upvotes

I've been working on an FSI (Fluid-Structure Interaction) simulation of a cycloturbine with a centrifugal-pendulum pitch control system.

Instead of fixed blades, these blades pitch freely within +/- 45-degree stops. The centrifugal forces of the rotation naturally balance against the aerodynamic loads to keep the blades at an optimal angle of attack.

In this velocity magnitude plot (TSR = 3.0), you can see the complex wake interaction between the three blades. The bright red/white regions near the blades are the Leading Edge Vortices (LEVs) forming and shedding—this is dynamic stall at work, which is essentially what keeps these turbines generating torque at lower tip-speed ratios.

Getting the strongly-coupled FSI (where the fluid moves the blade, and the blade moves the fluid) to remain stable over 12 revolutions was a challenge, but the periodic convergence is beautiful.

The whole physics engine and verification suite is open-source if anyone wants to look at the math behind it.


r/EngineeringPorn • • 20h ago

Pretty interesting video on the crazy roof at the Mercedes Benz stadium. Interesting.

Thumbnail instagram.com
0 Upvotes

r/EngineeringPorn • • 2d ago

Water, steam, and a red hot billet between the rolls

Post image
118 Upvotes

The water isn't cooling it — that's descaling, and it's the difference between clean surface and rolled-in defects.


r/EngineeringPorn • • 3d ago

Gaz-21 Volga

Thumbnail gallery
196 Upvotes

r/EngineeringPorn • • 4d ago

View from the tower. The speed is still rather fast

14k Upvotes

r/EngineeringPorn • • 3d ago

Spring-loaded bistable hinge

276 Upvotes

r/EngineeringPorn • • 3d ago

TIL about Lavkh - probably the most intricate thing I've ever seen made from a single slab

Thumbnail
youtube.com
15 Upvotes

r/EngineeringPorn • • 3d ago

Winding a clock mainspring using a specialized winder

164 Upvotes

r/EngineeringPorn • • 2d ago

From the Blacksmith community on Reddit: My Davinci Cam Hammer

Thumbnail
reddit.com
0 Upvotes

All right, tear me apart. If you wanna see it in action, give me a follow and watch me work some hot steel with it. I'm also building a 2.0 model that's gonna be upgraded. I know, I know. How could you upgrade this lol? Thanks for watching


r/EngineeringPorn • • 3d ago

Eiffel Tower, from the summit to the steam pumps underground

34 Upvotes

I built a Three.js cutaway of the Eiffel Tower, The tricky part was scale. I wanted you to see the whole 300 m tower, then get close enough to watch a single piston move.

I built this with GPT 6.2 Astra, using historical drawings of the 1889 lifts as references. Try opening the lift valve in the pressure-map view. You can watch the water flow change and see how the lift car responds.

https://www.meptasarim.com/eyfel-yeralti-pompa-dairesi-simulator.html


r/EngineeringPorn • • 5d ago

Semiconductor Probe cards

Thumbnail gallery
281 Upvotes

r/EngineeringPorn • • 5d ago

Knolled layout of a 1980s Sony Microcassette Recorder (M-88V), featuring its miniaturized belt drive and brass capstan flywheel [OC]

Thumbnail
gallery
91 Upvotes

r/EngineeringPorn • • 4d ago

Hydrostatic proof test on one of our power module components, run to 3,600 psi

Thumbnail
gallery
31 Upvotes

We’re an engineering team in El Segundo building 5 MW power modules around a supercritical CO₂ power block. Every pressure-containing component is proof tested before it goes into the module.

This one got a hydrostatic test. We filled it with water and stepped the pressure up in stages, holding at each level to watch the gauge for pressure decay and inspect the part for leaks. It ran all the way to 3,600 psi.

We use water because it’s nearly incompressible and stores very little energy under pressure, which makes a failure much safer to find on the test stand.

Happy to answer questions, ones we can!


r/EngineeringPorn • • 5d ago

Missing tile on STS-27 vs Starship Flight 15

Post image
1.6k Upvotes

r/EngineeringPorn • • 5d ago

Three SO-101 robot arms move one ball through tracks, a cup and salt using replay, vision and learned control [OC]

43 Upvotes

A lap through Almost Alive, an installation we built around three different control methods. The clip uses camera cuts and includes a mistake.

Echo replays recorded poses to tip the rocking track. Iris detects the orange ball in its cup, then replays the transfer motion and signals Echo. Bandit retrieves the ball from salt, where the pickup position varies, using a policy learned from demonstrations.

We collected 115 leader-arm demonstrations and trained ACT and diffusion models with LeRobot. Two camera images and the arm's position are inputs; a sequence of movements is the output. The learned pickup is slow and imperfect.

Original film and discussion: https://x.com/pbshgthm/status/2122679067065598015

Credits: SO-101 design by TheRobotStudio; hardware from Seeed Studio; learning software from Hugging Face LeRobot; track models by Tabu Design.


r/EngineeringPorn • • 5d ago

How Liebherr PR 776 Bulldozer Tracks Are Installed | Inside the Austrian Factory

Thumbnail
youtube.com
51 Upvotes

r/EngineeringPorn • • 6d ago

On board video from the S42 ship catch.

1.1k Upvotes

r/EngineeringPorn • • 6d ago

What one missing little heat shield tile looks like

Post image
3.9k Upvotes

r/EngineeringPorn • • 4d ago

Tesla unveils 7.4 MW solid-state power platform with claimed peak efficiency of 98.86%

0 Upvotes

Tesla’s new Powercore platform combines a transformer, inverter and solid-state circuit breaker inside a single medium-voltage unit for data centers, solar farms and battery-storage projects.

The company claims the system can continuously deliver 7.4 MW, achieve peak efficiency of 98.86% and clear electrical faults up to 1,000 times faster than conventional breakers. It supports medium-voltage AC inputs and DC outputs ranging from 800 to 2,000 volts.

Powercore could connect the grid directly to future 800-volt DC data centers while removing intermediate conversion stages. Tesla plans to manufacture it in the United States, with its first units expected to enter service in 2027.

Could integrated solid-state platforms become the standard power architecture for high-density AI data centers?