r/FiestaST • • Dec 14 '24

Stickied Thread: Cars for sale

41 Upvotes

Please use this thread to post your cars for sale. This will cut down on the individual threads that might pop up. Thanks everyone!

Please include mods, price, and location in each post.


r/FiestaST • • 19h ago

MK7 New Wheel and tire set-up!

Post image
86 Upvotes

Finally got the new set-up! Konig Heliograms 16x8 with Continental ECS02's 205 45 R16! Couldn't be happier with the fitment! And the grip is a chef's kiss!


r/FiestaST • • 15h ago

MK7 Normal sound?

7 Upvotes

Engine is warm

Just bought me a st.

It's 2013 and has 200000 km on it.

Everything seems good and the owner did oil change and service every 10k km.

Is this normal sound or is it ticking too much?


r/FiestaST • • 19h ago

Eco mode?

Post image
9 Upvotes

When I bought my 2015 ST, the guy I got it from said something about an eco mode that is somehow set through the steering wheel controls? He showed me once when I bought the car but it’s been a couple months and I’m just now thinking about it. He said if the throttle ever feels slow or something to that effect it’s in eco mode, and I have to do some combination of button pressing on the steering wheel to get it out of it? I’m sorry if it sounds confusing but I figured I’d ask if that’s a that a thing? Google showed no results for it.


r/FiestaST • • 1d ago

MK7 Random thoughts after tb/wp+etc work.

Thumbnail
gallery
17 Upvotes

Picked up this 2016 for cheap with hail damage. 160k, no record of the tb being done and a lot of other maint that hadent been done.

Started buying parts from the get go to do everything.

Tb/wp, gates kit

Serpentine belt+tensioner, gates kit

180* thermostat, gates kit

Intake manifold gasket, felpro

Throttle gasket, felpro

Valve cover gasket, felpro

Noise maker delete, whoosh

Trans side shift bushings, whoosh

Trans oil, motul dctf

Plugs, ngk 1 step colder

Watched a few videos and glanced over the service manual, but havent worked on the 1.6 before.

The 10pc dp tool kit includes everything you need, dont buy the 18pc

You need 2x m10 x1.5 flange nuts to hold the flywheel locking plate in place.

7mm( hose clamps)

8mm(most)

10mm(intake manifold/starter)

13mm(most larger hardware)

15mm(alt mounting)

17mm(fuel line)

18mm(crank bolt)

19mm(motor mount)

E torx 6(alt stud)

I took apart way more than was needed for just the tb/wp because of the other work I was doing.

I took out the battery box to get to the shifter bushings as well.

Idk why this myth keeps getting repeated, but you do not need to pull the axle to get to the tdc pin

Remove 2x 13mm nuts on the strap, 2x 13mm bolts on the mount come out. Wrench on the 3rd slotted one and the entire thing slides out of the way

Use the starter bolts+m10 nuts to hold the locking plate. Put the bolts in backwards from normal to avoid dropping the nuts in the belhousing.

Ac compressor needs to be loosened to get the thermostat housing off. Terrible design.

Intake manifold is easy enough to remove, not sure I would fight with the starter with it in place, especially after the alt is removed.

Alt mounting stud needs to come out/in with the alt. Theres not enough room to slide it on.

All of the electrical connections are fairly self explanatory and only fit one way.

Its a good opportunity to walnut blast the valves as everything is apart. Hobofreight blaster+fine media is $65. I extended the nozzle with some poly tubing.

Valvcover was leaking for quite awhile. Went through about 5 cans of brakeclean

Belt had 1 outside crack and most of the teeth on the inside. Probably good for 200k, but not worth the risk.

My trans took 2 full qts with nothing dripping out. Front end was lifted however. Shifts way nicer with fresh fluid and solid bushings.


r/FiestaST • • 1d ago

MK7 I love this car so much

17 Upvotes

So I don't often post here, I own a fiesta ST it's a 2018 mag Gray, I frequently lurk and I like a lot of the posts but for the most part I'm just an observer here. I was overcome with the need to post today however, so a couple of months ago my transmission was weird and it was getting hard to shift into first and second gear and then it progressively got worse and worse to the point where it was almost impossible to get into first gear second was rough third was rough and sometimes fourth was rough. After doing lots of research on the forum and here on the subreddit it was suggested to get BG super synchro 2 fluid and do a transmission fluid change. Well when I took the drain plug out literally no fluid came out of my transmission. I even jacked up the passenger side of the car higher than the driver side to see if I can get anything to come out, and it was bone dry. The last time anybody worked on the car was when I had it in the shop for the slave cylinder change at about 70,000 miles, and I'm at 109,000 mi now. I also had my timing belt changed at like 93,000 mi, in which they would have had to take one of the axles out but I don't necessarily know if they would have drained all the fluid out then. So several thousand miles with no transmission fluid, filled it up today drives like a dream again, and I don't think I had any adverse damage to my transmission for driving it so long with no fluid in it.

Tldr these transmission are bulletproof.


r/FiestaST • • 1d ago

Looking at a 16

Thumbnail
gallery
6 Upvotes

I’m looking at a 16 st with 104k I was told it’s stock no mods and I come to look at it today I see it has after market mods

I suspect someone changed it to e85 at some point just bc of the the dizzy tuning reader

What do yall think?


r/FiestaST • • 1d ago

Am I trippin?

Post image
4 Upvotes

Bought this car last week. Got a Cobb CBE and the exhaust shop says the flange on the Dp/cat is smaller than on the exhaust. Previous owner says it’s stock. Before I order a catalytic converter, is the shop wrong?


r/FiestaST • • 1d ago

Track day at lime rock park

Post image
47 Upvotes

Another good learning experience. The fact that I came within 5 seconds of my PB From my built foxbody race at is a true testament of how good this chassis is. The take aways

  1. Deff needs an aluminum radiator (i have one just havnt installed it yet)
  2. And oil cooler
  3. 205 tires don’t cut it, gonna step up to a 225
  4. The stock brakes (stoptech rotors/hawk pads) much better than expected, I need brake ducts (have them haven’t installed it)
  5. Going up to a 16x8 wheel these are 16x7 pony’s (for sale)

r/FiestaST • • 1d ago

MK7 U1035:00:2C & P1299:00:AC error codes

Post image
2 Upvotes

My 63 plate ST 180 had been off road for a few months back in March after getting a hole through the cylinder 3 intake valve. Usual repairs; new head (old one found cracked), new valves, plugs etc. Car was sorted, but felt sluggish compared to before the valve issue (car was tuned by previous owner).

There was a coolant leak from the head (not sure what the name of the part that was leaking is, see pic). I ran the car for a few months by topping to coolant tank up daily.

Last week I found out the high pressure fuel pump was letting fuel by into the oil, so a new hpfp and 2 rounds of oil/filter changes happened, and at the same time the coolant leak was addressed. The part is push-fit, and was taken from the old head, did not seat correctly so was cleaned, seated better and epoxied into place.

No other work except the epoxy has happened on the coolant system, but the car is now throwing U1035:00:2C & P1299:00:AC error codes.

The coolant tank it topped up, so I'm not sure why I'm getting code U1035 (I understand that P1299 is because of U1035). I've taken the coolant level sensor off and wiped it all down; the sensor looks okay. The connections were checked (12v, 2.85v, 2.14v and 0v).

I'm at a loss on how to resolve the issue with the level sensor, is this a case of try to find a new sensor, or is there something else I need to check?


r/FiestaST • • 1d ago

Tachometer randomly drops to 1000 RPM

2 Upvotes

It’s happened twice now, with no consistent situation. I’ll be driving along, the tach will randomly drop to 1,000 RPM for a few seconds (engine is running just fine, no noticeable drop on power or revs) then it will return back to reading correctly.

Any idea what’s going on?

Edit: it’s a 2019


r/FiestaST • • 1d ago

Where the fuel filter in a JA8 2010?

Thumbnail reddit.com
0 Upvotes

r/FiestaST • • 1d ago

MK7 New to owning a fiesta does this sound like it should

3 Upvotes

r/FiestaST • • 1d ago

MK7 What tool to adjust headlight level?

2 Upvotes

My driver side headlight is aimed up too high and likely annoying some drivers. I've been trying to lower the angle with no luck.

I know where the hole is to get to the adjustment gear but I can't get anything to grab. I've read some messages saying to use a phillips screwdriver and others an allen/hex. I've tried various sizes of both and it just doesn't feel like anything is working.

Any advice or tips? 2018 usdm mk7.


r/FiestaST • • 1d ago

MK7 shot sparkplug thread.

1 Upvotes

Back story skip to the next paragraph for the issue.

So I've swapped out dozens of spark plugs, no power tools everything by hand, but last Wednesday had a weird situation about 1/4 mile from my house my car lost power, sounded like an old carburetor car running cold, got home checked the codes one was cylinder 2 misfire, went to check the spark plug and as soon as I pulled out the coil pack the insulator was torn off, I'm not sure how that happened because the sparkplug was still in. Went to get new plugs coil pack, removed them, and that one in cylinder 2 gave me a hard time coming out, got all others out and in no problem but number two would only spin 3-4 times by hand and get tight. I grabbed the wrench to see if it was just a minor bind but no it was requiring some force which I didn't want to put. Tried cleaning the treads with a pipe cleaner no use still binds after 5 turns by hand.

Finally went today to get a spark plug thread chaser. That one goes in all the way by hand no problem and catches but the spark plug still binds, I've ran the chase over 20 times by now and now the spark plug won't even catch, but the chase does... I'm lost has anyone encountered this and what did you do? Right now I'm considering just going the heli coil route...


r/FiestaST • • 2d ago

MK7 My new 2014 Fist! MPG and radio autoplay question...

Post image
60 Upvotes

TLDR I cleared a engine code and I'm on a new drive cycle, I got 9 MPG on the drive home, and it's been roughly 50 Miles since and I still only get 18 MPG. When can I expect to get my 28 MPG back? Also what's the deal with Ford sync V3 and radio autoplay? Why does it always fall back to FM and how do I make it stop that?

First and foremost, I love the Fist! I bought it from a great owner, he took great care of it and had some tasteful mods on it. It has a accessport V3 with a dizzy tune already on it. This thing goes like a stabbed rat on boost and it's genuinely so much fun.

However I have two questions: first one, I have done a compression test on the car before I bought it (160psi all around at 117k miles) however I go to check engine light and I have to redo the drive cycle. On a drive back I got 9 MPG, and currently I only get around 18 after roughly 50 mi of driving, but the drive cycle isn't done yet. The previous owner said he always had 28 MPG and I'm wondering should I reflash the tune if that is causing the MPG problems? As you can see on the car on the side, I'm an old timer lover, this is my first turbo car, first car with the tune so I have no idea what it does.

The second question is on the sync V3. Every time I start the car, the radio blasts on whatever FM channel it last found and it's driving me crazy. I have a CD in the car and I want it to always fall back to the CD but it just plays FM whenever it feels like it. It has Android Auto and I would much rather it's be silent than for it to blast the radio until I connect my Bluetooth. Any idea will be nice, I never use the FM so I will even disable it just so it doesn't do that.


r/FiestaST • • 2d ago

Part number

Post image
2 Upvotes

Can anyone give me the part number to this part of the EVPA system. I swapped to the Woosh single port 2014/2015 system, zero codes. It’s amazing. But I have to get this bean smogged, so everything has to go back stock, I can’t seem to find the part number for the upper tube that heads down. Thanks folks.


r/FiestaST • • 2d ago

MK7 Help needed- can anyone tell me what might be causing this sound?

4 Upvotes

(In the video I am trying to make the noise happen by pressing and lifting off the accelerator quickly to rock the car)

I bought this car in March and it’s only done 44k miles however for a couple of months now I’ve noticed this creaking noise coming from what sounds like the front driver side area, it seems to happen mostly when I’m changing gear, however the gearbox is fine it’s more from the rocking of the car when changing gear that cause this creaking. I have had the tyre pressure warning pop up I don’t know if this is related as for some reason it’s got 3 newer tyres and one older one so it could just be that but the older tyre is on the front driver side so maybe that’s affected something? I know nothing about cars really 😂


r/FiestaST • • 2d ago

Brought the jellybean to the racetrack - ended up with this amazing picture

Post image
13 Upvotes

r/FiestaST • • 2d ago

Single caliper issue or bigger issue...

2 Upvotes

Noticed that my driver's front rotor was worn down more than the other 3... Took it to ford with new pads and rotors because I didn't have time or space to put them on myself and also asked if they could check and see if that caliper was fine or if it was something else causing it. Also told them that a bit ago I was having an issue where the car would pull to one side and then all brakes would catch and then be fine for a while, but also could hear one of the calipers dragging/ not releasing fully which is why I thought it could be that front driver's side... Not surprised but surprise the tech said the reason the brakes felt weird was because I had 2 different rotors on the fronts 🤦🏻‍♂️ told them they were the same set but one had worn down way more than the others to where there was no more slotted marks.

So my main question is what is a more likely scenario...

  1. driver's side caliper is locking up/ not releasing fully (or slowly).

Or

2) the other 3 aren't gripping as much as they should have been.

Otherwise brake pedal has and still feels fine after getting past that weird pulling moments which hasn't happened in months (if not longer?)


r/FiestaST • • 3d ago

MK7 Best way to clean valves with the intake manifold off?

Thumbnail
gallery
9 Upvotes

160k, I dont think theyve been cleaned before...


r/FiestaST • • 2d ago

Anyone have a Cobb accessport I can borrow to un-flash my FiST? Preferably in Denver area

1 Upvotes

I’m going to go a different tune route but don’t have the accessport. Bought the car at auction and it wasn’t included. Thanks ahead of time if you respond!


r/FiestaST • • 2d ago

New noise when revving engine.

1 Upvotes

I can hear a noise from engine bay when I rev the engine hard in neutral there is a click noise that happens when the rpm peaks and dissapears until the rpms settle back down which causes one more click, it is not continuous as I increase the rpms and seems to be isolated. Scratching my head to what could be causing it.


r/FiestaST • • 3d ago

Keyless entry quit working at the same time as windows and radio controls

0 Upvotes

Bought my FiSt at 72k miles drove it thirty minutes home turned it off had to use emergency start by holding my keys to the column every start since then
windows and radio controls quit at the same time
Both worked before the issue
now I also have a navigation fault
ford quoted me 150 per issue just to diagnose would love some direction ( I have changed the key battery four times now tried every brand cheap and expensive and have checked the dates to make sure the batteries were new)