r/GamingLaptops • u/No-Standard3169 • 1h ago
Benchmark 180 W Unlocked RTX 5070 Ti Laptop beats the average RTX 5080 Laptop!
I spent the past few days mapping out the full power and frequency scaling curve of the
RTX 5070 Ti Laptop GPU (GB205) on Ubuntu—from 15 W all the way to 180 W—without touching the physical SPI flash chip or doing a hardware shunt mod. As you will see, the gains were far from negligible, in some workloads reaching almost 35%.
- Laptop: Stock HP OMEN MAX 16
- CPU: Ryzen AI 9 HX 375
- GPU: RTX 5070 Ti Laptop
- GPU (GB205, 5,888 CUDA cores, 12 GB GDDR7, 192-bit bus)
- RAM: 32 GB 5600 MT/s
- OS / Driver: Ubuntu with nvidia-open 620.70.06 kernel modules Benchmark Results
How I Did It (No Hardware Mods)
RAM-only VBIOS override: I dumped my stock ROM and edited it with Panchovix/nvidia-vbios-vix-editor, raising the board power ceiling from 140 W to 180 W and the boot default from 80 W to 120 W while leaving the factory 1025 mV voltage ceiling and 180 A NVVDD current limit completely untouched.
Zero physical flashing: I load the modified ROM into RAM at boot using Panchovix/nvidia-linux-vbios-vix-loader on nvidia-open, so the actual SPI flash chip on the motherboard stays 100% stock.
Dynamic Boost & tuning: I used amagicai/nvpowerd-boost so nvidia-powerd can request up to the 180 W ceiling instead of stopping at 140 W, plus LACT for core and VRAM offsets**.**
FurMark 2 (2560×1440 Fullscreen, Vulkan, MSAA Off, 60s)
FurMark 2 showed the biggest uplift from the extra 40 W of power, since it was the only benchmark able to pull nearly all of it—sustaining ~175–176 W inside the new 180 W limit (capped by NVIDIA's GSP guard band and the stock 180 A NVVDD rail limit).

Note how linearly the score increases with power. It goes to show how much the 5070 Ti Laptop is power-capped.
Geekbench 7 OpenCL:
From the very beginning, it's important to note two things. Firstly, Linux gives an edge even at purely stock settings. Secondly, to better understand the graph, you have to look at how Geekbench 7 works: it runs very short, intense workloads that let the GPU ramp down in between. Because of that, Geekbench couldn't make use of all the extra power—even though it plateaus after 215,000, that's because the GPU hits its 1025 mV voltage limit much sooner than its power limit. I haven't seen any run of this benchmark pull more than 150–155 W.

Blender OpenData (Cycles OptiX)
Blender shows the same profile as Geekbench. During the workloads, the GPU hits its 1025 mV cap well before the new 180 W TGP (topping out around ~150 W).

Takeaways:
- Real-world gaming: Most standard games behave closer to Geekbench and Blender than FurMark—the 5,888-core GB205 die usually hits its voltage ceiling somewhere between 115 W and 140 W. Going past 140 W mainly pays off in heavy ray tracing / path tracing, super high resolutions, or sustained compute workloads.
- Thermals & VRM safety: Die temps stayed surprisingly cool (57°C peak on the 10,779 FurMark run with fans maxed), but laptop VRMs don't have direct temperature sensors and share cooling with the CPU. I only use 180 W for short max-fan benchmark runs and keep the laptop capped around 140–145 W for daily gaming.
Why No Game Benchmarks
You might notice I didn't include any actual game benchmarks here. Since I'm running on Linux and playing games through Proton, any FPS numbers I post wouldn't really mean much to most people on Windows—between translation overhead and driver differences, comparing them to standard Windows results just isn't accurate. I stuck to native Linux benchmarks (FurMark 2, Geekbench 7, and Blender) so the power scaling stays clean and actually reflects what the GPU is doing.
Disclaimer
To be completely clear, I do not endorse doing any of this—this post is strictly to share my own test results, not a recommendation to modify your laptop. Running a laptop GPU past its factory power limit pushes the VRMs, cooling, and power delivery beyond what they were sized for, can void your warranty, and carries a real risk of permanently damaging your hardware. If you choose to mess with VBIOS overrides, power limits, or overclocking, you do so entirely at your own risk; I take zero responsibility or liability for anything that happens to your machine.
Verification of benchmarks:



Feel free to ask me any question regarding the testing or anything you would like me to try.
I of course stay open to any of you sending me a 5080 or 5090 laptop to test how much more power we could get out of them !

