r/Homebrewing • • 6h ago

Question Kegging first timer - which setup?

4 Upvotes

I'm looking to get into kegging for the first time and would appreciate some advice on which of these three packages offers the best value.

I'm based in Norway, so these are locally available options. Prices are converted from NOK to USD (approximately).

My plan is to use 425g SodaStream-compatible CO₂ cylinders.

Option 1 – $149

  • Used, pressure-tested AEB 19L Cornelius keg.
  • CO₂ regulator with two outlets.
  • Ball Lock gas and liquid disconnects.
  • Picnic tap.
  • CO₂ and beer lines, hose clamps, etc.

The regulator is a standard CO₂ regulator, so I would need a separate SodaStream adapter (approx. $17) to use my 425g cylinders.

Option 2 – Private seller $190

  • Used AEB/Safer Cornelius keg 19L
  • New Oxyturbo SodaStream CO₂ regulator.
  • New complete beer dispensing set with a foam-reducing setup.
  • New CO₂ hose.
  • Extra keg seal kit.

The regulator is designed specifically for SodaStream cylinders, so no separate adapter is needed.

Option 3 – New package from vendor $230

  • New 19L Kegland Cornelius keg.
  • Choice of Kegland MK4 or Mini 360 regulator.
  • SodaStream adapter included with the MK4, while the Mini 360 connects directly to 425g cylinders.
  • Picnic tap and dispensing lines. (foam reducing line)
  • Other necessary fittings and accessories.

The price is the same whether I choose the MK4 or Mini 360 and since I don't plan on using larger CO₂ tanks, the Mini 360 seems like the best choice.

What I'm trying to decide

  1. Is buying a used Cornelius keg generally a safe choice? Assuming it's in good condition and holds pressure, is there any real reason to pay extra for a new one?
  2. Is the Oxyturbo regulator in option 2 a good quality regulator, or would you rather have the Kegland Mini 360?
  3. Is there any meaningful advantage to having two gauges instead of one when using 425g CO₂ cylinders?
  4. Which package would you personally choose?

Since I've never used keg before I'm looking for everything in one packages, but I also don't want to buy something I'll regret later. So the cheapest option would be around 170$, but is it worth the extra 60$ to get a new keg?

Anything else I need for my first keg setup?


r/Homebrewing • • 7h ago

Question Daily Q & A! - November 22, 2026

3 Upvotes

Welcome to the Daily Q&A!

Are you a new Brewer? Please check out one of the following articles before posting your question:

Or if any of those answers don't help you please consider visiting the /r/Homebrewing Wiki for answers to a lot of your questions! Another option is searching the subreddit, someone may have asked the same question before!

However no question is too "noob" for this thread. No picture is too tomato to be evaluated for infection! Even though the Wiki exists, you can still post any question you want an answer to.

Also, be sure to vote on answers in this thread. Upvote a reply that you know works from experience and don't feel the need to throw out "thanks for answering!" upvotes. That will help distinguish community trusted advice from hearsay... at least somewhat!


r/Homebrewing • • 18h ago

Question English Ale Came Out Like a Hazy IPA

12 Upvotes

I tried to make a Timothy Taylor's Landlord clone, a classic British cask ale:

9lbs Golden Promise
1oz Fuggles 60mins
2/3 Cup #1 Invert Syrup (15 mins)
1 tsp Irish Moss (15 mins)
1oz Styrian Goldings Flameout

90min boil 

Yeast: Safale S-04

OG: 1.050

FG: 1.008

But after two weeks in the primary and one week in the keg conditioning at 55F, it is very hazy, and quite hoppy, much hoppier than I would expect or want from this beer style. I prefer restrained hops and a malty backbone. It looks like a Hazy IPA or a Hefeweizen. Not that this is bad, it actually tastes pretty good, but not at all like an English ale or the beer style I was trying to hit. I tried cold crashing it at 36F for 24hrs and still no change, and the S-O4 yeast strain has always produced crystal-clear Bitters and English Ales when I've used it in the past. Perhaps the Styrian Goldings at flameout was added too late and they should have been boiled for 5 mins(?) Fuggles and Styrian hops are not strong varietals, nor were they in large quantities. Any ideas?

https://imgur.com/a/BnVpS8K


r/Homebrewing • • 22h ago

Question Rootbeer!

21 Upvotes

Hey y’all! Curious if anyone on here has any experience and/or recipes to share for homebrewing root beer from scratch. I don’t want to do the same old dry ice and extract thing, I wasn’t to be able to play with the flavors. I’ve done a few regular beers of various styles and figured making something the whole family could drink would be a fun side quest.


r/Homebrewing • • 6h ago

Chinook and Polaris combination?

1 Upvotes

Hi,

Last minute question here. Had few months of break from the brewing due to some idiotic issues and just life, and I just said I have to make a batch today with what I have.

Most suitable hops that I have are Chinook and Polaris. Has anyone tried this combination already? Malt that I will use is Pale Ale and some flaked oats.

This is my plan for 35l in fermentor.

Boil:

30g Chinook 60min

10g Chinook 15min

5g Polaris 15min

5g Chinook 5min

Whirlpool at 80C

40g Chinook

15g Polaris


r/Homebrewing • • 37m ago

I built an app for spotting patterns in your comp scoresheets (dev here, AMA)

0 Upvotes

Ok, ok, I know what you're thinking -- another citizen coder vibe coded some AI slop. But I'm a professional software engineer (well, these days I lead engineering teams but stay fairly technical) so if you're a competitive homebrewer and have struggled in the past to link your brewing data to your competition feedback, hopefully you'll find value in what I am about to share!

This is, admittedly, a niche for a niche -- homebrewers active on the competition circuit and the Master Homebrewer Program that want to use the feedback they are getting to brew better beer. I'm not talking about one judge from one scoresheet says your fermentation temp is too hot so you should go buy a glycol chiller. I had hundreds of scoresheets and wanted to identify trends across all of them; both for the same batch sent to multiple competitions and across batches and styles. So I built Grist.

There are a ton of features beyond just syncing your Brewfather or Brewer's Friend account and adding scoresheets. Grist helps keep you find competitions and then keeps you on track to make sure you don't miss registration or entry dates. You can even add a tracking number if you're shipping entries and follow the shipment status directly in Grist. You can manage packaging runs, which will not only automatically update your inventory for things like bottles and caps, but you can link a batch to a packaging run to an entry to really dive deep on if feedback is related to your recipe, your process, or your packaging (the last one helped me identify a packaging issue that was costing me about 7 points on average).

Most importantly, at its core Grist is free to use. There is a Pro tier that gives you access to things like automatic PDF import, deeper reporting and insights, and an AI assistant named Sight that allows you to ask natural language questions about your data, but you definitely don't have to upgrade to find value.

Grist is available on iOS, iPadOS, macOS, and web. There's also an Apple Watch app for tracking fermentation status and a few other things quickly from your wrist. If you're interested in checking it out, you can use this link to get 90 days free. I'm pretty actively still developing and launching new features, many of which come directly from user feedback, so please feel free to reach out to me with questions, issues, or ideas!


r/Homebrewing • • 1d ago

Hazy IPA Cleared after Kegging - Why?

7 Upvotes

My hazy IPA is crystal clear after 1.5 months in the keg. It was very hazy going into the keg.

Mashed @ 154 F and fermented @ 70 F. All hops were whirlpool (5 ounces) and dryhop (7 ounces).

No fining agents (never used them).

What would cause the haze to completely disappear? It is gone ...

----

4 lbs 8.0 oz       Pale 2-Row (1.8 SRM) 28.1 %      
4 lbs 8.0 oz       Pilsner Malt (1.6 SRM) 28.1 %       
2 lbs 8.0 oz       Flaked Oats (1.0 SRM) 15.6 % 
2 lbs 8.0 oz       Flaked Wheat (1.6 SRM) 15.6 %  
1 lbs 8.0 oz       Carapils / Dextrin Malt (1.5 SRM) 9.4 %   
8.0 oz             Acid Malt (3.0 SRM) 3.1 %

LalBrew Verdant IPA yeast

r/Homebrewing • • 19h ago

Question Ginger-bug fermented Ginger Beer in a keg

2 Upvotes

Hey all,

I have a batch of ginger beer fermenting on a wild fermentation that I started with a ginger bug. I want to keg this up for carbonation but am concerned that the ginger bug will infect the lines.

My plan is to stabilize with sulfites / sorbates before transferring it to the keg - would this work to keep my lines / keg from getting infected?

Thanks


r/Homebrewing • • 18h ago

Question Simple IPA kit SG

0 Upvotes

Hi all , bit short on time lately for all grain brew so decided to try a beer kit :) Found this https://www.themaltmiller.co.uk/product/simply-ipa-beer-kit/

for very cheap and thought I'll give it a go ! It's a 1.8kg kit and I bought 1.2kg LEM to go with it.

Now the starting gravity is showing 1.040 ...

Would this be expected with such cheap kit or did I not mix it properly ? ( thought I mixed it properly )


r/Homebrewing • • 1d ago

Pressurized transfer disaster

13 Upvotes

I have a conical fermenter with a floating dip tube and I am so over the floating dip tube style of transfer. I’ve done this 5 times now and every time there’s like a gallon and a half left behind that just doesn’t get picked up.

This time the beer line went empty, the keg felt mostly full. I gave it a minute to see if more beer would come out. Nope. I assumed it was mostly empty.

Here’s where I fucked up. I forgot to close the butterfly valve to the trub collector. When I took it off, beer came pouring out the bottom and flooded my room. Probably dumped a gallon before I closed the valve. After cleaning and mopping everything, I opened the fermenter just to see another half gallon still at the bottom.

Why the hell is there always so much beer left? I’ve just bought a sight glass and a 90 degree elbow. I’m just going to dump trub till beer is in the sight glass, then transfer to the keg from the bottom. That also avoids hop matter floating at the surface.

Anyone else have these issues or am I just a moron?


r/Homebrewing • • 1d ago

Potential Stuck Fermentation?

1 Upvotes

St Peter’s Cream Stout – fermentation slowing at 1.023. Is this normal?
I’m brewing a St Peter’s Cream Stout kit in my Malt Miller fermentation bucket.

It’s been fermenting for 5–6 days now in my fermentation chamber, . I followed the kit instructions and have kept the temperature at around 19, but increased it 20.3°C yesterday when it really slowed down.

My RAPT Pill is currently reading 1.023, but fermentation has slowed right down to around 0.2 gravity points per day.
I’m wondering whether this is normal for this stage of fermentation or whether it’s potentially getting stuck.

A few questions:

  • What final gravity should I realistically expect from this kit?
  • Should I just leave it alone and let it finish naturally?
  • Would increasing the temperature help, or is 20.3°C fine?
  • At what point should I start worrying about a stuck fermentation?

The instructions on the pack said it would take about six days and finish at 1.014, But every other kit I've brewed before has said fermentation should take around 14 days, so I'm a bit confused as to why this one says six days, first time I’m using a Rapt pill so
Maybe I’m just watching it too much lol

I’m relatively new to brewing, so any advice would be appreciated. Cheers!


r/Homebrewing • • 1d ago

Question Daily Q & A! - November 21, 2026

1 Upvotes

Welcome to the Daily Q&A!

Are you a new Brewer? Please check out one of the following articles before posting your question:

Or if any of those answers don't help you please consider visiting the /r/Homebrewing Wiki for answers to a lot of your questions! Another option is searching the subreddit, someone may have asked the same question before!

However no question is too "noob" for this thread. No picture is too tomato to be evaluated for infection! Even though the Wiki exists, you can still post any question you want an answer to.

Also, be sure to vote on answers in this thread. Upvote a reply that you know works from experience and don't feel the need to throw out "thanks for answering!" upvotes. That will help distinguish community trusted advice from hearsay... at least somewhat!


r/Homebrewing • • 1d ago

US nugget vs. Hallertau nugget. Update / Anecdotal experience

Thumbnail reddit.com
6 Upvotes

A while ago I posted this to see if anyone knew the difference. It seems a lot of nugget is sourced from the US so hallertau nugget is used a lot less.

I haven't had the chance to brew with US nugget.

But in the past months I brewed 3 batches with Hallertau nugget, 2 of which were single hop beers with relatively neutral yeasts (S-23 and S-04), and one of the (3.8% abv) single hop beers I dryhopped at a rate of about 2.2 g/L (0.3 oz / gal)

Since flavor and aroma profiles of Hallertau Nugget are quite hard to come by on the internet I will post my anecdotal experience.

In my experience, Hallertau Nugget is very neutral; it's the embodiment of "hoppy" without anything else. Apart from the extremely generic green hop aroma and flavor, it has some underlying unidentifiable fruitiness: in all 3 batches I got a very light zesty kind of fruitiness. But nothing woody or resinous or explicitly citric like I have seen in some descriptions of US nugget. The bitterness I got from it was very smooth.

Compared to Hallertau Mittelfrueh or Tettnanger, Hallertau Nugget for me came across as quite subtle and superficial, even with the significantly higher oil content versus those noble hops. The dryhop I did was noticable but spectacularly subtle.

I will keep using it just for this reason. Also because it's extremely cheap. I think it will do very well in a corn lager or something dark and heavy where you want nothing in the way of your malts and/or yeast.


r/Homebrewing • • 1d ago

Cleaning question

5 Upvotes

About to start my first homebrew. Do I need to clean my never used equipment prior to sanitization or will sanitization be enough. Thanks!


r/Homebrewing • • 1d ago

10g of yeast for 2.8L of brew?

3 Upvotes

I put 1.5kg of frozen cherries into 1.3L of water, then put the MO2 cider yeast in. Now I put the whole pack in because I understood u can't really put too much yeast in, only too lil. However now Im doubting that piece of advice I was given. Especially since I dont like the smell of yeast, so now I'm worried if adding too much in will make the brew (8%) taste yeasty when Im trying to make it sweet.


r/Homebrewing • • 1d ago

Question Help me build a high-quality, long-lasting home alcohol-making setup for my parents (complete beginner, multiple types of alcohol)

0 Upvotes

Hey everyone!

I'm planning to buy my parents a Christmas gift, and I'd love some recommendations from people who actually know what they're doing, because I honestly have absolutely no experience with any of this.

My parents have been interested in making their own alcohol for quite some time, so I thought it would be a great idea to put together a proper home setup for them.

Here's what I'm looking for:

  • Versatility: Ideally, I'd like them to be able to make as many different types of alcohol as reasonably possible: wine, beer, cider, mead, whisky, moonshine, fruit liqueurs, I understand that different types of alcohol require different equipment, but I'd love to have a solid foundation that covers multiple uses.
  • Quality and durability: This is supposed to be a long-term investment. I don't want to buy the cheapest beginner equipment or flimsy plastic accessories that will need replacing after a year or two. I'm perfectly happy to spend more on well-built, reliable equipment that will last for many years.
  • Modularity and expandability: I'd prefer to buy equipment that can be reused across different processes and expanded upon in the future, rather than purchasing several completely separate setups.
  • Experience: My parents are beginners, and they currently don't own any equipment, so we're starting completely from scratch.
  • Budget: I don't have a strict budget. I'm willing to spend a reasonable amount for quality, but I also don't want to throw money at overpriced professional equipment that wouldn't provide any meaningful benefits for home use.
  • Location: I'm based in Poland, so brands and equipment available in Europe would be preferable.

I'm not expecting a single machine to magically make every type of alcohol. I just want to build a versatile, high-quality setup that will allow them to experiment with different things over the years.

A few questions:

  1. What would you consider essential equipment for a versatile, high-quality home setup?
  2. Which brands and specific models would you personally recommend? I'm especially interested in equipment known for durability and reliability.
  3. Which pieces of equipment can be used for multiple types of alcohol?
  4. Should I prioritize stainless steel, glass, or food-grade plastic? What are the advantages and disadvantages of each?
  5. What equipment is actually worth spending extra money on from the beginning?
  6. Are there any tools or accessories that beginners tend to overlook but that make the whole process significantly easier?
  7. What would you avoid buying, even with a relatively flexible budget?
  8. If you were starting over today, what would your ideal setup look like?

I'd also appreciate recommendations for more advanced equipment that could become useful as they gain experience.

Ultimately, I want to give my parents something they'll genuinely enjoy using for years, rather than a cheap starter kit they'll quickly outgrow.

Any specific product recommendations, complete equipment lists, personal experiences, or suggestions for where to start would be greatly appreciated.

Also what other subreddits I should repost it to?

Thanks in advance!

EDIT: I'm aware about the legality of producing whisky, moonshine etc. as long as my parents are safe (products can be tested somehow) I don't care.


r/Homebrewing • • 1d ago

What Black Friday deals you keeping an eye out for?

9 Upvotes

Anything good out there.


r/Homebrewing • • 1d ago

Brewing Tools and Calculators in BrewHalla App

0 Upvotes

Before, when I used Brewfather or Beersmith I often needed to search up things on the net like the carbonation chart or a quick mash calculator for some random brew. Or a brix to abv calculator since I routinely use a refractometer. Brewersfriend always forced me to login every time just for a quick calc and onebeer for the abv from brix calculator was sometimes down.

So I put all the tools I could think of into BrewHalla.

https://play.google.com/store/apps/details?id=com.brewhalla.beer&hl=en

Here is a list of what is available in the "TOOLS" tab on BrewHalla.

  1. Carbonation Calculator: PSI to set your regulator for target CO₂ volumes
  2. Mash Water Calculator: strike volume, strike temp and sparge water from grain weight
  3. ABV Calculator: actual ABV from OG + FG readings
  4. IBU Calculator: Tinseth bitterness at any boil time
  5. SRM / EBC Colour: beer colour from grain bill (Morey)
  6. OG / FG / ABV (All Grain): pre-boil OG, OG, FG and ABV estimate
  7. Priming Sugar: CO₂ volumes to sugar at bottling
  8. Yeast Pitch Rate: cells needed, starter size and DME
  9. Refractometer / Brix → ABV: Brix to SG, plus OBrix + FBrix to corrected FG and ABV%
  10. Hydrometer Temp Adjust: correct an SG reading for sample temperature
  11. Dilution / Boil-Off: hit target gravity by diluting or boiling
  12. Brix Converter: Brix ↔ Specific Gravity ↔ Plato
  13. Brewhouse Efficiency: actual extraction % and PPG
  14. Mash Infusion: boiling water to hit a new rest temperature
  15. LME ↔ DME Converter: convert between extract types at the same gravity
  16. Chaptalization: sugar addition to hit a target Brix
  17. Water Chemistry: salt additions for a target mineral profile
  18. CO₂ / Kegging Pressure: PSI needed to hit target carbonation
  19. Hop Substitute Finder: flavour-matched swap when a hop is unavailable
  20. Recipe Scaler: scale the current recipe to any batch size
  21. Brew Day Timer: mash, boil, hops and whirlpool timers with alarm

BrewHalla is a free app with all features open including cloud storage. If you like the app, please give it a review on Google Play Store. BrewHalla has been on the Play Store for over six months and we are on the 60th revision. Lot's of features have been added from user suggestions as well as bugs and look/feel things worked out.

If you have any suggestions on how I can improve the app, please comment below!

(iOS is not yet released)

Thank you


r/Homebrewing • • 2d ago

Ladies! What would convince you to brew beer?!

24 Upvotes

My local homebrew club is trying to recruit more members. I'm the only brewster and would love to get more women into brewing.

What might encourage/encouraged you to brew beer? What events might be a good way to get more women into brewing?


r/Homebrewing • • 2d ago

Question Summer Mead

Thumbnail reddit.com
1 Upvotes

I asked this question in r/mead and got no insights, I figured I would try it here


r/Homebrewing • • 2d ago

Weekly Thread Free-For-All Friday!

4 Upvotes

The once a week thread where (just about) anything goes! Post pictures, stories, nonsense, or whatever you can come up with. Surely folks have a lot to talk about today. If you want to get some ideas you can always check out a [past Free-For-All Friday](http://www.reddit.com/r/Homebrewing/search?q=Free+For+All+Friday+flair%3AWeekly%2BThread&restrict_sr=on&sort=new&t=all).


r/Homebrewing • • 2d ago

Old packet of Imperial Yeast A09

0 Upvotes

I've had an unopened packet of yeast in the fridge since March 2022. It's been in my way for years, moved with me, and seen some shit.

Is it just trash at this point or is there a way to use it?

In all honesty, I have a fews gallons of cider and not enough room in the freezer. I could order some yeast but I have this on hand if it can be revived!


r/Homebrewing • • 2d ago

Question Daily Q & A! - November 20, 2026

2 Upvotes

Welcome to the Daily Q&A!

Are you a new Brewer? Please check out one of the following articles before posting your question:

Or if any of those answers don't help you please consider visiting the /r/Homebrewing Wiki for answers to a lot of your questions! Another option is searching the subreddit, someone may have asked the same question before!

However no question is too "noob" for this thread. No picture is too tomato to be evaluated for infection! Even though the Wiki exists, you can still post any question you want an answer to.

Also, be sure to vote on answers in this thread. Upvote a reply that you know works from experience and don't feel the need to throw out "thanks for answering!" upvotes. That will help distinguish community trusted advice from hearsay... at least somewhat!


r/Homebrewing • • 2d ago

Cannular Auto Lift

4 Upvotes

Anyone know if the new Cannular auto lift seamer will make its way to the US?


r/Homebrewing • • 2d ago

Question Major Spike Flow Issues, Please Help

3 Upvotes

Does anyone have a Spike Flow pump who have experienced a loud grinding noise upon startup a second or two after turning it on? I'm at my wits end trying to figure out what is wrong and am on my third replacement from Spike.

Grinding is on the pump head side. The impeller spins but makes a loud screeching noise. This video is for the Bilchmann Riptide but the screen is the noise I'm talking about: https://www.youtube.com/watch?v=mQm3ZfxXcpU

Never been run dry.

I have ensured that the orange o ring seal is seated properly

I have ensured I don't overtighten the tri-clamp

I have made sure the axel for the impeller is screwed in and screwed in straight

Per the manual, I have made sure the distance from the motor housing to the base of the spinning magnet is 0.220, as measured through a top of the line mitutoyo digital caliper

I have made sure the plastic housing for the spinning magnet is not overly tightened, was tightened in a star pattern of up down left right, and that the spinning magnetic is in fact centered.

I honestly don't know what to do. If you know if a solution, I'm all ears. Spike has also tried to troubleshoot but short of sending me replacements, I can't seem to get a working pump. This has ruined multiple brew days already to have everything set up and suddenly discover the pump is simply not working.