r/Homebrewing • • 19h ago

Question Rootbeer!

21 Upvotes

Hey y’all! Curious if anyone on here has any experience and/or recipes to share for homebrewing root beer from scratch. I don’t want to do the same old dry ice and extract thing, I wasn’t to be able to play with the flavors. I’ve done a few regular beers of various styles and figured making something the whole family could drink would be a fun side quest.


r/Homebrewing • • 15h ago

Question English Ale Came Out Like a Hazy IPA

11 Upvotes

I tried to make a Timothy Taylor's Landlord clone, a classic British cask ale:

9lbs Golden Promise
1oz Fuggles 60mins
2/3 Cup #1 Invert Syrup (15 mins)
1 tsp Irish Moss (15 mins)
1oz Styrian Goldings Flameout

90min boil 

Yeast: Safale S-04

OG: 1.050

FG: 1.008

But after two weeks in the primary and one week in the keg conditioning at 55F, it is very hazy, and quite hoppy, much hoppier than I would expect or want from this beer style. I prefer restrained hops and a malty backbone. It looks like a Hazy IPA or a Hefeweizen. Not that this is bad, it actually tastes pretty good, but not at all like an English ale or the beer style I was trying to hit. I tried cold crashing it at 36F for 24hrs and still no change, and the S-O4 yeast strain has always produced crystal-clear Bitters and English Ales when I've used it in the past. Perhaps the Styrian Goldings at flameout was added too late and they should have been boiled for 5 mins(?) Fuggles and Styrian hops are not strong varietals, nor were they in large quantities. Any ideas?

https://imgur.com/a/BnVpS8K


r/Homebrewing • • 21h ago

Hazy IPA Cleared after Kegging - Why?

6 Upvotes

My hazy IPA is crystal clear after 1.5 months in the keg. It was very hazy going into the keg.

Mashed @ 154 F and fermented @ 70 F. All hops were whirlpool (5 ounces) and dryhop (7 ounces).

No fining agents (never used them).

What would cause the haze to completely disappear? It is gone ...

----

4 lbs 8.0 oz       Pale 2-Row (1.8 SRM) 28.1 %      
4 lbs 8.0 oz       Pilsner Malt (1.6 SRM) 28.1 %       
2 lbs 8.0 oz       Flaked Oats (1.0 SRM) 15.6 % 
2 lbs 8.0 oz       Flaked Wheat (1.6 SRM) 15.6 %  
1 lbs 8.0 oz       Carapils / Dextrin Malt (1.5 SRM) 9.4 %   
8.0 oz             Acid Malt (3.0 SRM) 3.1 %

LalBrew Verdant IPA yeast

r/Homebrewing • • 3h ago

Question Kegging first timer - which setup?

3 Upvotes

I'm looking to get into kegging for the first time and would appreciate some advice on which of these three packages offers the best value.

I'm based in Norway, so these are locally available options. Prices are converted from NOK to USD (approximately).

My plan is to use 425g SodaStream-compatible CO₂ cylinders.

Option 1 – $149

  • Used, pressure-tested AEB 19L Cornelius keg.
  • CO₂ regulator with two outlets.
  • Ball Lock gas and liquid disconnects.
  • Picnic tap.
  • CO₂ and beer lines, hose clamps, etc.

The regulator is a standard CO₂ regulator, so I would need a separate SodaStream adapter (approx. $17) to use my 425g cylinders.

Option 2 – Private seller $190

  • Used AEB/Safer Cornelius keg 19L
  • New Oxyturbo SodaStream CO₂ regulator.
  • New complete beer dispensing set with a foam-reducing setup.
  • New CO₂ hose.
  • Extra keg seal kit.

The regulator is designed specifically for SodaStream cylinders, so no separate adapter is needed.

Option 3 – New package from vendor $230

  • New 19L Kegland Cornelius keg.
  • Choice of Kegland MK4 or Mini 360 regulator.
  • SodaStream adapter included with the MK4, while the Mini 360 connects directly to 425g cylinders.
  • Picnic tap and dispensing lines. (foam reducing line)
  • Other necessary fittings and accessories.

The price is the same whether I choose the MK4 or Mini 360 and since I don't plan on using larger CO₂ tanks, the Mini 360 seems like the best choice.

What I'm trying to decide

  1. Is buying a used Cornelius keg generally a safe choice? Assuming it's in good condition and holds pressure, is there any real reason to pay extra for a new one?
  2. Is the Oxyturbo regulator in option 2 a good quality regulator, or would you rather have the Kegland Mini 360?
  3. Is there any meaningful advantage to having two gauges instead of one when using 425g CO₂ cylinders?
  4. Which package would you personally choose?

Since I've never used keg before I'm looking for everything in one packages, but I also don't want to buy something I'll regret later. So the cheapest option would be around 170$, but is it worth the extra 60$ to get a new keg?

Anything else I need for my first keg setup?


r/Homebrewing • • 16h ago

Question Ginger-bug fermented Ginger Beer in a keg

2 Upvotes

Hey all,

I have a batch of ginger beer fermenting on a wild fermentation that I started with a ginger bug. I want to keg this up for carbonation but am concerned that the ginger bug will infect the lines.

My plan is to stabilize with sulfites / sorbates before transferring it to the keg - would this work to keep my lines / keg from getting infected?

Thanks


r/Homebrewing • • 3h ago

Chinook and Polaris combination?

1 Upvotes

Hi,

Last minute question here. Had few months of break from the brewing due to some idiotic issues and just life, and I just said I have to make a batch today with what I have.

Most suitable hops that I have are Chinook and Polaris. Has anyone tried this combination already? Malt that I will use is Pale Ale and some flaked oats.

This is my plan for 35l in fermentor.

Boil:

30g Chinook 60min

10g Chinook 15min

5g Polaris 15min

5g Chinook 5min

Whirlpool at 80C

40g Chinook

15g Polaris


r/Homebrewing • • 4h ago

Question Daily Q & A! - November 22, 2026

1 Upvotes

Welcome to the Daily Q&A!

Are you a new Brewer? Please check out one of the following articles before posting your question:

Or if any of those answers don't help you please consider visiting the /r/Homebrewing Wiki for answers to a lot of your questions! Another option is searching the subreddit, someone may have asked the same question before!

However no question is too "noob" for this thread. No picture is too tomato to be evaluated for infection! Even though the Wiki exists, you can still post any question you want an answer to.

Also, be sure to vote on answers in this thread. Upvote a reply that you know works from experience and don't feel the need to throw out "thanks for answering!" upvotes. That will help distinguish community trusted advice from hearsay... at least somewhat!


r/Homebrewing • • 15h ago

Question Simple IPA kit SG

0 Upvotes

Hi all , bit short on time lately for all grain brew so decided to try a beer kit :) Found this https://www.themaltmiller.co.uk/product/simply-ipa-beer-kit/

for very cheap and thought I'll give it a go ! It's a 1.8kg kit and I bought 1.2kg LEM to go with it.

Now the starting gravity is showing 1.040 ...

Would this be expected with such cheap kit or did I not mix it properly ? ( thought I mixed it properly )


r/Homebrewing • • 23h ago

Question Help me build a high-quality, long-lasting home alcohol-making setup for my parents (complete beginner, multiple types of alcohol)

0 Upvotes

Hey everyone!

I'm planning to buy my parents a Christmas gift, and I'd love some recommendations from people who actually know what they're doing, because I honestly have absolutely no experience with any of this.

My parents have been interested in making their own alcohol for quite some time, so I thought it would be a great idea to put together a proper home setup for them.

Here's what I'm looking for:

  • Versatility: Ideally, I'd like them to be able to make as many different types of alcohol as reasonably possible: wine, beer, cider, mead, whisky, moonshine, fruit liqueurs, I understand that different types of alcohol require different equipment, but I'd love to have a solid foundation that covers multiple uses.
  • Quality and durability: This is supposed to be a long-term investment. I don't want to buy the cheapest beginner equipment or flimsy plastic accessories that will need replacing after a year or two. I'm perfectly happy to spend more on well-built, reliable equipment that will last for many years.
  • Modularity and expandability: I'd prefer to buy equipment that can be reused across different processes and expanded upon in the future, rather than purchasing several completely separate setups.
  • Experience: My parents are beginners, and they currently don't own any equipment, so we're starting completely from scratch.
  • Budget: I don't have a strict budget. I'm willing to spend a reasonable amount for quality, but I also don't want to throw money at overpriced professional equipment that wouldn't provide any meaningful benefits for home use.
  • Location: I'm based in Poland, so brands and equipment available in Europe would be preferable.

I'm not expecting a single machine to magically make every type of alcohol. I just want to build a versatile, high-quality setup that will allow them to experiment with different things over the years.

A few questions:

  1. What would you consider essential equipment for a versatile, high-quality home setup?
  2. Which brands and specific models would you personally recommend? I'm especially interested in equipment known for durability and reliability.
  3. Which pieces of equipment can be used for multiple types of alcohol?
  4. Should I prioritize stainless steel, glass, or food-grade plastic? What are the advantages and disadvantages of each?
  5. What equipment is actually worth spending extra money on from the beginning?
  6. Are there any tools or accessories that beginners tend to overlook but that make the whole process significantly easier?
  7. What would you avoid buying, even with a relatively flexible budget?
  8. If you were starting over today, what would your ideal setup look like?

I'd also appreciate recommendations for more advanced equipment that could become useful as they gain experience.

Ultimately, I want to give my parents something they'll genuinely enjoy using for years, rather than a cheap starter kit they'll quickly outgrow.

Any specific product recommendations, complete equipment lists, personal experiences, or suggestions for where to start would be greatly appreciated.

Also what other subreddits I should repost it to?

Thanks in advance!

EDIT: I'm aware about the legality of producing whisky, moonshine etc. as long as my parents are safe (products can be tested somehow) I don't care.