r/Locksmith • u/TheDeeman_2415 • 21m ago
r/Locksmith • u/RainMan318 • 40m ago
I am NOT a locksmith. Where should this spring arm go?
Front door latch suddenly stopped working. Took it off to look inside - the spring arm circled was loose in the casing, but otherwise everything looked ok. I've put the spring back on the little nodule it seemed to come from, but not sure where the rest of the arm should go? Any experts able to help?
r/Locksmith • u/BirthdayEarly9503 • 11h ago
I am NOT a locksmith. Replacing a Schlage Door Handle
I have a door handle that's ~20 years old and the lock button popped off. I have another door handle of the same type where the handle is is out of alignment with the other handle. I picked up a couple of Schlage door handles to replace both of the door handles thinking it would be a 20-30 minute job.
I've spent more time than I care to admit fiddling around with this. If you have ideas on how to get this handle removed, I would be eternally grateful.
I've watched every YouTube video I can find on how to remove these things and I'm not able to do it.
r/Locksmith • u/socalibew • 7h ago
I am NOT a locksmith. Cylinder cap
So, I'm just tinkering and I took this little brass sheet out of an old schlage cylinder. Now it won't go back.
Do I need to bend the little tabs out, place the cover, then re-bend the tabs in?
Or is this a lost cause?
r/Locksmith • u/davidricecake • 7h ago
I am NOT a locksmith. What are my options for this lock?
So I’m a first time homeowner and I’ve run into my first annoying issue. We want to change out this deadbolt for an electronic Schlage BE365 lock so we don’t have to give people a key or hide a key or anything like that. When I went to put the lock on the casing, overlaps the bottom knob and so will never be flat (face palm). In general, it seems like the deadbolt and knob are really close together.
What are my ways out of this? Replacing the door is silly. I don’t see any other good locks that would work with this spacing. Is it possible to move the hole up and like patch it?
r/Locksmith • u/darealkenny • 22h ago
I am a locksmith What expensive solutions have you installed lately?
Recently installed this solution on 6 doors. More doors in the next weeks.
Double motorized mortises, panic pushbar. These 6 are in an external nook without a roof, so is gonna be interesting to see how well they fare in the elements.
But this got me curious to see what others expensive installs have been lately, share below :)
r/Locksmith • u/Derpicorn6969 • 10h ago
I am NOT a locksmith. are the 2 compatible?
hi im new to this, i am planning to get EAZEA S-80 Magnet-Proof Digital Letterbox Lock and fit it to Yale YKB/200/BB2 key box. do let me know if the fit works or if theres a product that already has digital lock for small keyboxes thanksss
r/Locksmith • u/kykythebarbarian • 15h ago
I am NOT a locksmith. Purchased 3 Baldwin locks and the lock spins but won’t lock.
I just had 3 new doors with Baldwin Contemporary Single Cylinder Keyed Entry Door Knob with Square Rose installed. The installer said they have never seen the lock not able to be used. The lock and key turn as one piece. The key turns the device but it won’t lock. I am unable to move the lock on the back. Any trouble shooting tips before he leaves? He is stumped. I am stumped.
r/Locksmith • u/PossibleScallion95 • 21h ago
I am NOT a locksmith. What does this bolt need to operate?
This surface mount bolt had a cone spring inside, but it had snapped in half. When I went to get a replacement spring the hardware store was surprised that the lock would have that inside. Can anyone tell me what sort of spring the lock needs and where it should go?
r/Locksmith • u/EnvironmentalArm2592 • 20h ago
I am NOT a locksmith. Extend tailpiece for Yale Lever Lock
I bought a Yale Lever lock for an exterior patio door and the door with is slightly too wide. I was able to switch from 22 mm screws to 30 mm screws to get both sides of the lockset attached, but the tailpiece is barely short. Are there any options that don’t require soldering or something that could be a simpler adjustment? Yale of course told me to return it as they are not made for that size of door so they were not helpful. Only reason I’m trying to stick with Yale is because I have 3 other doors that already have them stalled.
r/Locksmith • u/-d3x • 21h ago
I am NOT a locksmith. Total noob: smart lock install
Hey there,
Looking to install a smart lock on my door because:
- I need to replace the lock cause it’s really hard to open. 2. It’s gonna be easier for my kids to get in and out while locking/unlocking.
- Short term renting.
BUT, the installed hardware make me wonder if it’s feasible.
I have attached pictures of the mechanism.
Can you please advise my sorry ass on a possible install?
Thanks in advance.
Ps: I’m not a native English speaker.
r/Locksmith • u/Ok_Piano_1826 • 1d ago
I am NOT a locksmith. Am i screwed?
Ok, so pretext- im a newly hired building trades worker for the county. I have 2 properties im responsible for, one being a house built in the 1920s (west coast of florida, if that helps). The house is preserved pretty damn well, but one of the first things brought up to me was the door hardware is starting to fail. I cant even find pictures of these on the internet, so i dont have a model number (id rather not take any apart to try to find a model number even though i have a suspicion it will be on the mortise) and cant identify anything about these. Does ANYONE know anything about these? Besides that theyre baldwin lol. The handles are falling off, some are jamming, and im trying to keep the house as period correct and original as possible, because its a designated historical site. Any help would be GREATLY appreciated. Ive only done renovations on houses from the 60s and up. Nothing this old, and im trying my best because its important to keep this history alive.. any help would be amazing, thanks.
r/Locksmith • u/LockoutGuy18 • 1d ago
I am a locksmith Keeping Up With Inventory (automotive locksmiths)
I wanted to ask you guys that do a lot of automotive work. How do you guys manage to keep up with new inventory since frequencies and transponders change frequently. Especially the Hyundai Kia Keys the way I’ve been doing it is I’ve been becoming more and more of an Xhorse/ Autel fan to generate smartkeys sometimes I wish I could have all the keys, but I’m not meeting the demand. Some clients are not willing to wait a few days for special orders. Also, I’ve been letting go some of the older vehicle jobs -2005 simply because I’m trying to focus more on the new stuff,
Ultimately I’m trying to become more organized and efficient so I can continue to deliver good customer service. Any tips/ recommendations are greatly appreciated. TIA
r/Locksmith • u/Crappy_Screw_Turner • 1d ago
I am a locksmith First for me. Automatic flushbolt
Found at a hotel being built. Any clue as to the manufacturer? Have 2 that broke before it's even open.
r/Locksmith • u/tennisinthesouth • 1d ago
I am NOT a locksmith. Weiser help! How can I get a replacement mechanism and latch???
r/Locksmith • u/StrongStranger19 • 1d ago
I am NOT a locksmith. Cat learned how to open our front door. Can this handle be replaced?
Our cat has learned how to pull the lever and exit the house when the door is unlocked. We tried to replace this with a new knob we bought online, but the hole for the handle is below the lock mechanism on the side of the door. This differed from the pictures on the guide and I’m officially out of my depth.
My mom doesn’t want to call a locksmith because she is convinced they’ll only tell her we need a new door, and doesn’t want to pay for them to come out if that’s the case. Does this look like something a locksmith would be able to replace with a different knob or handle that cats can’t operate?
r/Locksmith • u/LordValgor • 1d ago
I am NOT a locksmith. Where to buy mechanical locks?
reddit.comr/Locksmith • u/OLDPARSON • 1d ago
I am NOT a locksmith. Old lock
I cannot pull the mechanism pull the mechanism out. All screws are removed. It is crazy!!! It is maybe 20 years old.
r/Locksmith • u/ADiddy7263 • 1d ago
I am a locksmith VTD secure access lock/ HP Tuners failed key program
Saw another thread on this but mine has a bit different variable.
Anyone know if an ECU that has been unlocked by HP Tuners will just flat out cause this error?
Updated BCM and ECM with Techline but keep getting this error still every time. Unit is a 2021 Tahoe and has an existing key that works. I’ve tried turning ignition on with key and also removing that key to do the open/close door method.
Customer sent ECU out to be unlocked to be able to tune it for whatever reason. Is a standard Tahoe no modifications of any kind.
Am currently using Cardaq Mongoose cable it always works fine on anything else.
Thanks for any input!
r/Locksmith • u/izzyizzi • 1d ago
I am NOT a locksmith. Is it possible to find a key that would work in this old bedroom door lock ?
r/Locksmith • u/FrozenHamburger • 2d ago
I am a locksmith Why doesn’t kwikset ..
… make residential entry or privacy hardware with egress where you don’t have to thumb-turn to unlock and exit? Like the F series. Pretty much anything kw keyway, residential grade 2 or 3, is rigid interior when locked.
r/Locksmith • u/Tronracer • 2d ago
I am NOT a locksmith. Cutting a mortise lock
How much should I expect to pay someone to install a mortise lock in a blank slab pocket door that’s in place?
Edit: It’s an Emtek Narrow Oval Mortise lock for pocket doors. The door is a painted hardboard 28x80 solid core flush pocket door. 1 3/8” thick.
I am in NJ in the USA
r/Locksmith • u/Waste_Government6959 • 2d ago
I am NOT a locksmith. Can’t find the right digital/electronic smart lock
So, I have this dilemma where I cannot seem to find the perfect door lock for a commercial space. I wanted something that can be opened with a keytag or key-pass similar to gyms, though I want to see if there is one that is not hard-wired in, but everything I seem to find with a striker of sorts is on a monthly subscription or membership access basis. Everything else I find is too wide, or won’t work on this door it seems. Any recommendations from the experts?