r/Monitors • • 14h ago

Discussion If budget wasn’t a issue, which Monitor will you pick?

0 Upvotes

.


r/Monitors • • 12h ago

Discussion really bad ghosting in gta 6

Post image
0 Upvotes

r/Monitors • • 19h ago

Discussion Why do manufacturers keep using the manspreading monitor stand

Post image
614 Upvotes

Like genuinely, these are ugly, uncomfortable to use and there is no real reason to choose this one instead of the normal flat squared-ish one.


r/Monitors • • 3h ago

Discussion What's the difference between led and lcd

0 Upvotes

I Heard some people Say Hey my pc had LED/LCD screen but what are the difference but what are them


r/Monitors • • 5h ago

Discussion Turning the power button off after shutting down the system unit

0 Upvotes

So after shutting down the system unit the monitor goes standby mode and do I need to turn off the monitor as well or just leave it standby mode? I am using an extension with power button and I always turning it off and unplugged it after shutting down my system unit.


r/Monitors • • 20h ago

Discussion oled monitor upgrade

Post image
1 Upvotes

this monitor is currently $687 rn and ive been thinking of buying it. i have a radeon 9700x and amd 9060xt. is this worth buying for my specs? if not then what should i get i wanted to max out an oled monitor so maybe i could upgrade my parts later.


r/Monitors • • 14h ago

Sale Pulled the trigger on this for my first OLED

Post image
7 Upvotes

r/Monitors • • 13h ago

Discussion Which one should I get

Thumbnail
gallery
2 Upvotes

Deciding which to get since I got a gift card lmk


r/Monitors • • 22h ago

Discussion What's a good first 1440p High refresh rate monitor for under $200?

2 Upvotes

I have been looking into getting a new monitor for a little bit now and I think it's finally time. I am looking for monitors under $200 that will be decent to use, preferably 27 inches or so, 144Hz at 1440p will be plenty for my use case. I don't need anything like HDR yet as I would want to wait till I get an OLED monitor with a better PC in the future for that. My only solid reference point is the new video by Monitors unboxed with the GIGABYTE M27Q2, as well as the Asus ROG Strix XG27ACS as my two main options.

Do you guys have any recommendations or are the Gigabyte and Asus Rog monitors pretty decent?


r/Monitors • • 18h ago

Discussion GTA 6 VA Panel Monitor

0 Upvotes

If I have a 300 nit va panel monitor for gta 6 should I just play with HDR off or try to optimize HDR?


r/Monitors • • 23h ago

Discussion Acer Monitor gives me either 60hz or 144hz but no 75hz option, how to force it?

0 Upvotes

I've been looking everywhere for a long time on how to make my 27" Acer nitro kg271u n3bmiipx to run at 1440p with 75hz locked, but it only gives me either 60, 120 or 144hz.

AMD adrenaline is confusing, windows display settings or the full list of properties doesn't give me 75hz option unless it's 1024x864p on my RX 9060XT and it's maddening.

Anyone has an idea how to solve my predicament?

EDIT: Thank you kindly to the guy who showed me it was through AMD Adrenaline>Settings>Display>Custom Resolution and just change to 75hz, we'll see how it last lol.


r/Monitors • • 22h ago

Discussion OLEDTextFix: free, open-source tool to reduce text colour fringing on OLED monitors (QD-OLED and WOLED)

24 Upvotes

Text on OLED monitors often has coloured edges because the subpixels are not laid out like a normal RGB stripe. MacType and ClearType tuning cannot fix that, because they do not know where your subpixels physically are.

OLEDTextFix captures the desktop (DXGI Desktop Duplication), resamples each colour channel on the GPU at that colour's real subpixel position, and shows the result in a click-through overlay. It does not touch the apps, the registry or the drivers.

What it has:

- Presets for 9 QD-OLED panel classes, measured from macro photos of 25+ monitors

- WOLED presets (RWBG and RGWB) measured from 13 macro photos. These are NOT tested on real hardware yet, so I would really like feedback

- 3 filters (Sharp / Balanced / Smooth), strength slider, per-channel X/Y offsets, ClearType-compatible mode

- Pauses for fullscreen games, low overhead (frame skipping, motion bypass), optional separate processing GPU

- Built-in update check (SHA-256 verified)

- MIT licence, built by GitHub Actions from source

Known limits: the overlay adds about one frame of latency, so it is for desktop and text work rather than competitive games. The exe is unsigned, so Windows SmartScreen will warn once.

Download and source: https://github.com/oguz463/OLEDTextFix

If you try it, tell me your panel model and what you see (and which preset it picked). If your subpixel layout is different, the README explains how to measure it from a macro photo.


r/Monitors • • 1h ago

Discussion PG27UCDM vs PG27UCWM – Which one would you recommend?

1 Upvotes

I’m currently using the ASUS ROG Strix XG27UCGR (4K IPS 160Hz, Full HD 485Hz), and I’m considering upgrading to OLED.
I’m choosing between the ASUS PG27UCDM (QD-OLED) and PG27UCWM (Tandem WOLED), and I’d really appreciate opinions from people who have actually used these monitors.
My room lighting is approximately:
35% completely dark.
35% with a regular warm/yellow light bulb turned on.
30% natural daylight. My window is directly beside me.
PG27UCDM:
I’ve read complaints about QD-OLED blacks appearing purple or magenta under ambient lighting.
How noticeable is this with daylight or a regular warm/yellow light bulb?
Does the purple tint affect only black areas, or can other colours also take on a purple/magenta tint?
Is the purple tint really noticeable during everyday use, or is it mostly exaggerated in online discussions?
PG27UCWM:
I’ve seen quite a few negative opinions about this model.
One measurement I came across reported only 224 nits in Real Scene brightness.
Is it genuinely that dim compared to the PG27UCDM?
Are its HDR performance and overall image quality disappointing in actual use?
What matters most to me:
Deep, genuinely black-looking blacks, even with some ambient light.
Good SDR brightness for everyday use.
Excellent HDR brightness and highlights in games.
Minimal distracting reflections.
Overall image quality without having to keep my room completely dark.
I also want to mention that the dual-mode feature (4K 240Hz / 1080p 480Hz) is completely irrelevant to me. From what I’ve seen, the 1080p mode looks noticeably blurry compared to native Full HD, so I wouldn’t consider it a selling point.

Does the purple/magenta tint on the PG27UCDM affect only black levels, or can it also affect the appearance of other colours under ambient lighting?
Am I right in thinking that the PG27UCDM is better overall in almost every aspect, with the main disadvantage being its coating (BlackShield Film vs Anti-Reflection coating)?
Honestly, I’m very happy with everything the PG27UCDM offers. My only real concern is the purple tint of blacks under ambient lighting. I don’t want to feel like I need complete darkness in my room just to enjoy proper black levels.
If you were spending your own money, which one would you choose and why?
Thanks!


r/Monitors • • 3h ago

Discussion 32” 4K QD-OLED vs dual 27” 4K OLED/Mini-LED for mixed coding, gaming and media?

3 Upvotes

I'm upgrading from a 34” Xiaomi curved ultrawide (3440×1440, 144Hz VA) and have already ordered a Samsung Odyssey OLED G80SH (32” 4K 240Hz QD-OLED) for S$1,007 (~US$780) directly from Samsung, with a 3-year warranty.

I'm now reconsidering whether a dual 27” 4K setup might be better, particularly for the higher PPI (~163 vs ~140) and extra screen space.

Usage

  • Coding/productivity: Personal coding projects, occasional WFH, lots of reading code, text, logs and documentation (for work) as I am in tech.
  • Gaming: Casual Gaming, Dota 2, AAA/single-player games and occasional couch co-op like It Takes Two
  • Media: Films, TV shows and YouTube generally in 4k

Setup

  • Desk: 120 × 70 cm
  • Viewing distance: 50–70 cm, sometimes closer
  • PC: RTX 4070, Ryzen 5 5600, 32GB RAM (plans to upgrade in the future, so want monitor to be future proof)
  • Lighting: Ceiling light behind me (tho plan to get ambient lighting behind monitors), generally no direct sunlight, occasionally half-open blinds
  • Location: Singapore, with access to the Chinese monitor market like Hisense etc.
  • Budget: Under S$1,100 (~US$850) total, but willing to stretch for long term compatibility

Options I'm considering

  1. Keep the 32” Samsung G80SH, possibly adding a smaller 24/27 IPS as a secondary later.
  2. Switch to dual 27” monitors, potentially one 4K Mini-LED or OLED as the primary and a regular IPS secondary.

For Mini-LED, I'm looking at Hisense/Xiaomi/TCL models. I'm also open to recommendations for 27” 4K OLED monitors that fit the budget.

What I'm trying to figure out

  • Is the difference between increased PPI noticeably better for text/code at my viewing distance?
  • Would dual 27” monitors be more practical for my usage than a single 32” display?
  • For a 27” primary, would you recommend Mini-LED or OLED, especially considering the prices available from China?
  • Would two 27” monitors fit comfortably on a 120 cm desk, or would a 32” + smaller secondary make more sense?

I'd appreciate suggestions from anyone who's used both sizes or switched between OLED and Mini-LED for similar mixed usage.

Thank you!


r/Monitors • • 3h ago

Discussion Upgrade from 32" flat OLED to 45inch 5k2k UltraGear?

2 Upvotes

Long story short, I am very happy with my Dell 32-inch OLED but I am also craving for something bigger. How big will be the size increase for me? Besides gaming, how are movies on the Ultra Wide?
Also how much will be the performance hit? I have a rtx 5090.


r/Monitors • • 4h ago

Discussion Can’t decide between two monitors

4 Upvotes

I can’t decide if I should buy the MSI MAG 272UP QD-OLED X24 27" QD-OLED or the MSI MAG 274UPDF E16M 27".

I’m going to use the monitor for pretty much everything including work, studying, gaming, entertainment etc. I game on a PS5 slim and really want a 4K monitor to play both competitive and story games like cyberpunk, GTA and COD. I’d say it’ll be used anywhere between 2-8 hours a day for a mix of everything.

My main concern is longevity. If I’m spending a good amount I want it to be suitable for all these uses especially gaming. In terms of price, one is £300 and the other is £500 which I don’t mind as long as the OLED is that much better.

Which of these would you recommend or is there a better alternative?


r/Monitors • • 8h ago

Discussion Which 4kOLED would you prefer, or do you have a totally different recommendation?

Thumbnail
gallery
2 Upvotes

Title, basically.
I am torn between these two and, other than the slight price difference, I have no idea how to decide.
Would be for PC Gaming purposes, mostly single player.
Thanks for your help!


r/Monitors • • 10h ago

Photo Snatched this exotic beauty

Post image
10 Upvotes

340€ for a 3840x1600 @ 160Hz LG 38GN950-B

My first Ultrawide Monitor coming from a 55 inch 4K TV 144Hz


r/Monitors • • 10h ago

Photo Is my room too bright for a glossy oled screen ?

Post image
2 Upvotes

I plan to buy the gigabyte MO27Q28GR
I know it’s a glossy screen and it doesn’t like luminous room
How do you feel about my room?
I use a desk lamp and the ceiling lamp most of time


r/Monitors • • 14h ago

Discussion Best performing 27 inch 4k ips monitor for Switch 2 and PC

4 Upvotes

r/Monitors • • 16h ago

Discussion Samsung Odyssey G65B: HDR10+ Gaming over HDMI with an EDID override, plus service menu tweaks

Thumbnail
gallery
2 Upvotes

I started looking through my Odyssey G65B’s service menu because the CRT-style startup animation and pop-ups were bothering me. I disabled the Game Bar and EU energy pop-ups, exposed the Peak Brightness setting, and got Cyberpunk 2077 to trigger HDR10+ Gaming over HDMI. My test setup was a G65B, RTX 4060, and Windows 11.

How I opened the service menu with ColorControl

I enabled IP Remote on the G65B and paired it in the Samsung Controller tab of ColorControl 11 using the secure connection. With the monitor on, I sent KEY_INFO followed by KEY_FACTORY from ColorControl. That opened Samsung’s service menu. The settings below are under FMS → Factory Menu App.

Photograph the original values before editing anything. Menu paths can vary by firmware. Avoid factory reset, panel type, white balance, and calibration actions.

What I changed in FMS

The full feature keys below start with com.samsung/featureconf/.

  • Game Bar auto-popup — In Option → MRT Option, I set game_bar.auto_launch_support_type to FMS_AUTO_LAUNCH_NOT_SUPPORT.
  • EU energy prompts — In Option → Production Option, I set setting.eu_energy_regulation to false.
  • Peak Brightness — In SVC → Other Setting → Expert, I enabled product.peak_brightness to expose the picture control. I didn’t measure a brightness gain.
  • HDR10+ Gaming — In Option → MRT Option, I enabled setting.menuitem.game.hdr10plus_gaming_support to expose the monitor setting. The PC still needed the EDID override described below.

For the startup animation, welcome_mode.effect_type showed FMS_WM_EFFECT_DEF, FMS_WM_EFFECT_PROJECTOR, and FMS_WM_EFFECT_MLED. There was no visible Off option, and I didn’t verify a way to disable it.

How I edited the HDMI EDID

My original HDMI EDID didn’t advertise HDR10+ Gaming. I added an HDR10+ Source Side Tone Mapping (SSTM) data block to EDID block 1, the first CTA-861 extension on my unit. This was a Windows override.

  1. Back up your HDMI EDID and existing overrides. Identify the active HDMI entry for your monitor in Custom Resolution Utility (CRU) and export its EDID. Back up any existing registry override separately. Have DisplayPort or another screen available in case HDMI goes black.
  2. Locate the CTA-861 extension. On my EDID, it was the 128-byte block starting at file offset 0x80. The first byte was 02. Within that block, byte offset 2 points to the end of the data-block collection and the start of the detailed timing area. Offsets here are zero-based.
  3. Add the SSTM data block. Insert E5 01 8B 84 90 59 at that detailed timing offset. Shift the existing timing data six bytes later and use six bytes of trailing zero padding immediately before the checksum to keep the extension 128 bytes long. Increase the offset stored in byte 2 by six. Recalculate checksum byte 127 so the sum of all 128 bytes is zero modulo 256. Preserve the other EDID blocks and existing CTA data blocks. If your layout differs, there’s already an HDR10+ vendor block, or there isn’t enough padding, stop and inspect your EDID before applying these steps.
  4. Apply only the patched extension. I wrote the edited 128 bytes as the REG_BINARY value named 1 under HKLM\SYSTEM\CurrentControlSet\Enum\DISPLAY\<your HDMI monitor instance>\Device Parameters\EDID_OVERRIDE. Use your own HDMI instance and administrator rights. If a value named 1 already exists, save its exact bytes before replacing it. Microsoft’s EDID override documentation
  5. Reload and verify. Reconnect HDMI or use CRU’s restart64.exe to refresh the graphics driver. A monitor-device restart alone sometimes left NVIDIA using cached EDID data on my PC. Check that your usual resolution, refresh rate, and VRR are still available.

The final byte, 59, represents 600 nits peak and 240 nits full-screen in this test. Those were approximations based on my original EDID. They aren’t colorimeter measurements or calibration values I’d recommend copying to another monitor.

To roll back, restore the previous binary value 1 or remove that value if you created it. Then reconnect HDMI or refresh the graphics driver. Preserve your other overrides. If the screen stays black during a CRU driver restart, CRU documents an F8 recovery mode that temporarily unloads overrides. CRU instructions and recovery

What I actually saw

HDMI: With the override installed, I set the monitor’s HDR10+ Gaming option to Basic and started in regular HDR10. When I enabled HDR10+ inside Cyberpunk 2077, the monitor’s Info panel showed HDR10+ and Samsung’s Game Bar showed HDR10+ Gaming. I didn’t force NVIDIA mode 2 for that Cyberpunk test. While the mode was active, Game HDR (HGiG) was greyed out. Switching HDR10+ Gaming from Basic to Off dimmed the image. An earlier manual test had shown Mode Not Supported.

Here are the photos from Cyberpunk: https://imgur.com/a/db7JCgO

DisplayPort: With a separate DP override, NVIDIA reported HDR10+ Gaming capability and accepted mode 2. ColorControl showed that mode, but the monitor itself never showed HDR10+ Gaming over DP. I restored my previous DP settings and verified that regular HDR10 was back. NVIDIA’s HDMI-only guidance

The photos show the monitor’s indicators during a manual HDMI test. The Cyberpunk test was separate. Together, the tests show that my G65B recognized the mode over HDMI. I haven’t measured its tone curve or verified HDR10+ movie metadata passthrough from a Windows player.

If anyone reproduces this, I’d be interested in your G65B size, firmware, GPU, game, and what the monitor’s own Game Bar reports.

Edit: Added Cyberpunk proofs.


r/Monitors • • 19h ago

Discussion Monitor oled hdr gta 6

0 Upvotes

ciao a tutti , sto giocando a gta 6 da un monitor asus rog 27 pollici oled (l'ultimo fatto quello con la tecnologia tandem oled) , solo che non riesco a farmi piacere i colori...con hdr accesso i colori mi sembrano troppo scuri e poco brillanti , con quel tipico effetto giallino che non riesco a farmi piacere, ho modificato tutte le impostazioni del monitor mettendo la gamma colori a 7200 , hdr gaming luminosita 100 e contrasto 80 ma comunque non mi piace.

dite che ci perdo molto se stacco l'hdr?


r/Monitors • • 21h ago

Discussion Gaming monitor PS5/software

Post image
2 Upvotes

I’m trying to choose between two monitors: the LG UltraGear 27G810A-B 27” and the Gigabyte G27UP or perhaps another model? From what I’ve gathered, the G27UP has similar specifications to the M27UP, a monitor that has received quite good reviews. I plan to use it for a PS5 and occasionally with a laptop for software development, though gaming is the primary focus. My budget is up to 400$, any opinions would be appreciated!


r/Monitors • • 23h ago

Discussion Backlight Bleed and Ips Glow worries

Thumbnail
gallery
6 Upvotes

Is this amount of backlight bleed in the corners and ips glow acceptable and normal on this gigabyte g27q2 1440p ips monitor