r/Omada_Networks • u/Ninja_Harbinger • 10h ago
r/Omada_Networks • u/David_Omada • 1d ago
Official TP-Link Omada Switch Comparison Guide (2026) – Find the Right Switch for Your Network
Not sure which Omada switch is right for your network? We've put together a comparison chart to make choosing a little easier!
From unmanaged and Easy Managed switches for small offices to multi-gig access, 10G/25G aggregation, campus, and industrial switches, this chart gives you a quick overview of the Omada lineup — including port counts, speeds, PoE budgets, and mounting options.
Check out the full comparison in our Reddit Wiki:
https://www.reddit.com/r/Omada_Networks/wiki/index/switch_reference_guide/
We'd love to hear from you!
- Planning an upgrade but not sure which model to choose?
- Is there anything you'd like us to add or improve in this guide?
Drop your thoughts or questions in the comments! Your feedback helps us make this resource more useful for the community.
Disclaimer: This guide reflects the Omada switch lineup as of November 2026. Specifications and availability may change. Please refer to TP-Link's official website for the latest information.
r/Omada_Networks • u/Neil_Omada • 1d ago
Official Applying Omada 11: Family Matters
Our article series, Applying Omada, released its 11th article this morning! This series is meant to provide real-world scenarios that offer some insights into use cases and the troubleshooting process.
This month's article is about setting up guest wifi for the holidays. Have you faced any similar difficulties setting up a guest network for relatives in your own home? What about for large events hosted in your place of business?
Let us know in the comments below, and as we get into the Thanksgiving and Christmas season here in the U.S., we'd like to wish everyone early happy holidays!
r/Omada_Networks • u/cuesir • 1d ago
Pioneers Pioneer Program Kit 3 - Week 3, 4, 5 Altogether
Week 3 Review: AI Detection & Event Accuracy
I turned on Person, Vehicle and Pet Detection and tested it with several triggered events. During the day, detection worked well. At night, in both IR and full-colour modes, the AI often couldn't tell people and pets apart, and it sometimes classified people as pets. This was the only real accuracy problem I found this week.
Line Crossing Detection, Intrusion Detection and Detection Zones were all easy to set up and worked as expected. I kept the default sensitivity because it handled most situations well without any changes.
Week 4 Review: Active Deterrence & Two-Way Audio
The deterrence features are a mix of strong and weak points. The red and blue warning lights are bright, clearly visible at night, and work as intended. The camera speaker is also very good: when I talked through the Omada Guard app, the audio was clear and responsive.
Two-way talk, however, doesn't fully work. Audio from the app plays through the camera, but the camera's microphone doesn't pick up sound during a conversation, so I can't hear the other person in the app.
The built-in siren works but should be louder. It measured around 70 dB, while competing floodlight cameras have sirens rated at around 105 dB. A bigger problem is that the siren stops as soon as you leave the Omada Guard app instead of running for its full 10 seconds. In a real incident, I would trigger the siren and then leave the app to call the police, so the siren needs to keep sounding in the background. I would also like the option to set the siren duration to longer than 10 seconds.
I couldn't find the setting for custom or preset voice messages, so I wasn't able to test that feature. In simulated intrusion scenarios, the alarm triggered correctly when someone entered the detection zone.
Overall, the lights and speaker are effective deterrents. The microphone problem, the siren volume and the siren stopping when you leave the app are the main areas that need improvement.
Week 5 Review: Recording, Playback & Storage Management
Recording and playback were the strongest part of the system so far. Continuous recording ran reliably, and 24/7, Event and Scheduled recording modes all worked as expected. Timeline playback, event-based playback and searching for events over a longer time range all worked without issues.
Video export was better than I expected. Exported clips play in standard media players, so you don't need a proprietary codec or the manufacturer's own player, which is a common annoyance with other systems.
Multi-channel playback works well in the Omada Guard app. In the web interface (accessed by IP address), though, it only plays one channel at a time, which limits reviewing several cameras from a computer.
Storage efficiency was a pleasant surprise. Ten minutes of recording used about 200 MB at 8 MP and about 150 MB at 4 MP, so the higher resolution needs only about 50 MB more per 10 minutes. With 8 channels, the 4TB drive holds about two weeks of footage.
Remote access was also impressive. I manage the system over the LightLink VPN, and downloading a 10-minute clip took only about 25 seconds.
r/Omada_Networks • u/Calculus76 • 1d ago
Help and Support Fusion Pro 2.5G - hardware & firmware confusion
I purchased a Fusion Pro 2.5g (not PoE) unit from Amazon US for delivery to UAE. Its working fine but i'm very confused about hardware & firmware versions of this model:
- I've been sent a US model and i understand this comes in 2 hardware versions ; 1.0 and 1.6. However on outer packaging it states my unit is v1.6 but in firmware settings it states my unit is hardware version 1.0. So which hardware version do i have and what is the difference between the 2 (if any)?
- In the Omada app (used for initial setup), i was able to to upgrade to 'latest' firmware V1_3.0.0 Yet if i go to Omada support website, the latest version is shown as V1_4.0.2. But downloading this and trying to manually upgrade to V1_4.0.2 through web portal gives me the error that the file size is too big!! (>1 gb). I was only able to upgrade to V1_4.0.0 as the file size for that is less than 1gb. So why can't I upgrade to V1_4.0.2? Why does the Omada app not provide any firmware newer then V1_3.0.0 when clicking on check for updates?
- Is there any option for auto firmware update (at specified hrs) in settings? I was unable to find any such option.
Thanks
r/Omada_Networks • u/BudTheGrey • 1d ago
Suggestions + Feedback Getting attack details
I see log entries in my control similar to this:
ER707M2 detected multi-connections TCP SYN Flood attack and dropped 417 packets.
I realize that the firewall did it's job and dropped the packets, so no real action required by me. There does not seem to be a way to see where what IP's the attack originated from. If there are repeat offenders, perhaps I could put up an IP blacklist or geo block or some such.
r/Omada_Networks • u/MrBaddKarma • 1d ago
Help and Support Help with ordering demonkit
I was approved for a demo kit today but had an issue ordering it. Now the coupon code no longer works. Does anybody know who to contact for support? I tried replying to the original email but that mailbox does not exist.
r/Omada_Networks • u/axiomeb2 • 1d ago
Help and Support ES210XPP-M2 v1.0 firmware update
I have received the update 1.0.3 of the firmware and applied it on one of the 3 switch in my network. The switch was at version 1.0.1 which had been installed without issue a few weeks ago. The new switch update was far from being smooth, it ended up disconnected. I had to manually power it off and on to get it back working and had to battle with a few devices afterwards ( like no longer responding to pings) and had to restart them also. Now, everything is up and running. Has anyone seen similar issues?
r/Omada_Networks • u/ZealousidealAd9008 • 2d ago
Help and Support IP not show up with wired connection with 2.5 & 1 Gbps switch
Having problem with IP not show up with wired connection client on new Fusion Pro 2.5 with 2 followed switchs:
- ES206GP v2.0
- ES206X-M2 v1.0
Read some old thread that Omada gonna fixed it but it seem like it gonna go nowhere. It is so annoyed to me.
Anyone know anyway to work around that?
r/Omada_Networks • u/nopacketloss • 3d ago
Discussion Final thoughts on the T8S4-4T (4 cams (8MP) + 4TB NVR)
This is a follow up to my previous post where I documented my installation experience. Now it's been almost two months with the security cameras system and I haven't experienced any issues. POE is a huge step up compared to my previous Wyze Wifi cameras. I have decided to purchase the kit after this evaluation and I've already completed some upgrades! Swapped out the installed 4TB HDD with an 8TB HDD that I shucked. I've also added 5 additional TP-Link Tapo cameras to the NVR for 9 cameras total (out of 16 channels). With the upgraded storage I'm now looking at about 6 weeks of storage for all 9 cameras with 24/7 continuous recording.
r/Omada_Networks • u/OmadaNetworks • 3d ago
Pioneers Omada Pioneer Program Roundup: Real-World Trial Feedback, Camera & Fusion Pro Setups
From upgrading existing networks and testing Wi-Fi performance to exploring 8MP camera quality and integrated surveillance management, our Pioneer participants have been putting Omada products to the test in all kinds of real-world environments.
We've seen detailed reviews, creative setups, troubleshooting tips, and even some unexpected visitors caught on camera.
A huge thank you to all our Pioneers for taking the time to share their experiences, discoveries, and honest feedback!
To make these contributions easier to explore, we've brought together all community posts across three areas:
- Fusion Pro: Networking, performance, and deployment
- Cameras & NVR: Image quality, recording, and everyday captures
- Fusion Pro + Cameras & NVR: Integrated management and advanced configurations
And this collection will keep growing! We'll continue adding new Pioneer posts as more participants share their experiences.
Transparency note: Many participants tested equipment provided or loaned by TP-Link. The linked posts reflect individual users' experiences and opinions.
1. Fusion Pro | Networking, Performance & Deployment
What does Fusion Pro look like in a real-world network?
From replacing existing gateways and migrating controllers to configuring VLANs, managing PoE, and testing Wi-Fi 7, these Pioneers have explored how Fusion Pro fits into different network environments.
- Moving from an ER707-M2 and Windows Software Controller to Fusion Pro 2.5G PoE — Controller migration, dual WAN, and VLAN configuration.
- Omada Pioneer Kit 2: My Experience So Far — Initial setup, Wi-Fi tuning, and camera adoption troubleshooting.
- Week 2 of the Omada Networks Pioneer Program — PoE, QoS, and device behavior under network load.
- Week 1 Omada Pioneer Kit Impressions — EAP772 adoption after changing the LAN subnet.
- EAP772 Wi-Fi 7 Review — LAN throughput exceeding 2 Gbps, with MLO enabled and disabled.
- Omada Kit 1: Wi-Fi Speed Doubled! — A household Wi-Fi speed comparison with the EAP613.
2. Cameras & NVR | Image Quality, Recording & Everyday Use
How do Omada cameras and NVRs perform beyond the spec sheet?
Our Pioneers have been testing image quality, night vision, recording performance, and compatibility with existing surveillance systems. They've also shared some great real-life footage along the way!
Hands-On Reviews & Testing
- Omada 8MP Turret Camera Quality — Day/night image quality and two-way audio compared with Amcrest.
- Omada PoE Camera Kit vs. Legacy Swann — Same-location color night-vision comparisons and third-party RTSP recording.
- Pioneer Program Kit 3 — Week 2 — WDR adjustments and motion ghosting in color night vision.
- Omada Cameras: My Experience — UniFi G6 Bullet comparison and NVR time-zone feedback.
- Pioneer Program Kit 3 — Week 1 — Automatic discovery of eight existing Lorex cameras in one setup.
- T8S4-4T Home Lab Build — Outdoor installation and a 24-hour recording test with Tapo.
- Omada Pioneer Kit 3 — Review and Impressions — Plug-and-play setup, event thumbnails, and timeline feedback.
- 30 Days with an Omada NVR and Cameras — 14-channel recording, retention, and ONVIF compatibility limitations.
Caught on Camera — Unexpected Moments
Not every camera test needs a benchmark. Sometimes the most memorable results come from everyday life (or unexpected nighttime guests)!
- Night Clarity and a Stray Dog — Nighttime footage and initial observations of alert categories.
- Raccoon Family Visiting at 3 a.m. — A nighttime wildlife capture using the 4K Turret.
- The 3 a.m. Lawn Bandit — Another unexpected overnight visitor.
- Cryptid Appears While Installing an Omada Camera — A surprise appearance during camera installation.
- Sports Day Warm-Up on an 8MP Turret — An everyday indoor recording.
- Netcat — When a curious cat joins the camera setup. 🐈
3. Fusion Pro + Cameras & NVR | Integrated Management
What happens when networking and surveillance come together?
This is where things get particularly interesting.
From managing Omada Network and Guard through a unified interface to recording with Fusion Pro's onboard SSD or a standalone NVR, our Pioneers have explored how these products work together across different network configurations.
Deployment & Unified Management
- Pioneer Kit 1 Review — First impressions of Fusion Pro and the standalone camera kit.
- First Impressions of Fusion Pro + NVR16-8P — Four cameras connected to the NVR and unified Network/Guard management.
- Pioneer Program Kit 2 — Week One with Omada — Onboard SSD recording and camera VLAN migration.
- Week 3 — Cameras on Their Own VLAN — Guard recording after VLAN isolation and Reolink camera re-adoption.
- Omada Pioneer Kit 1 — Real-World Testing — L3 switching, dual WAN, Wi-Fi 7, and simultaneous recording.
- Week 2 Performance — 2.5GbE file transfers with two active camera streams.
- Omada Pioneer Kit 2: Really Impressive — Direct PoE camera adoption and unified management.
- New to the Pioneer Program, Not to Omada — A new-site deployment with two PoE cameras.
- Pioneer Program Kit 2 — Week 1 — SSD installation, controller setup, and initial camera adoption.
- Omada Pioneer Kit 2 Arrival — Unboxing, migration plans, and upcoming camera tests.
Advanced Integrations & Troubleshooting
- Fusion Pro Guide: Cameras Behind an L3 Switch — Camera adoption across routed VLANs using an Inform URL.
- NVR and Fusion Pro 2.5G — Gateway QoS and third-party camera recording setup.
- Fusion Pro with Two Local and Four Remote Streams — Remote VIGI streams using ONVIF and site-to-site IPsec.
- Fusion with VIGI — Remote VIGI NVR adoption using pre-release firmware.
- Kit #1: Omada Guard Thoughts — Frigate comparisons and a Hikvision RTSP recording issue.
- Fusion Pro Feature Demo — Camera Case Center — Grouping, exporting, and sharing incident clips.
- Kit 1 Initial Impressions — Camera VLAN isolation and early comparisons with Frigate.
- Pioneer Program Kit 2 — Weeks 2–5 — Firewalla coexistence, Guard playback, and repeated alerts.
Results may vary depending on individual setups, device models, configurations, and firmware versions.
More Pioneer Stories to Come!
This roundup is a growing collection, not a one-time recap.
As more Pioneer participants publish their experience, deployment guides, performance tests, and everyday experiences, we'll continue adding their posts here.
Our goal is to make this a useful resource for the community — whether you're considering an upgrade, troubleshooting a setup, or simply curious about what other Omada users are building.
Already shared a Pioneer post that's not listed? Drop the link in the comments! We'd love to include more contributions as the collection grows.
Make sure to check back for future additions.
Your Turn!
Feel free to share your firmware version, camera/NVR model, and recording setup, especially if you've run into something others might learn from.
Thanks again to all our Pioneers for sharing your experiences, insights, and creativity.
r/Omada_Networks • u/David_Omada • 3d ago
Discussion What was your first Omada piece of networking gear, and do you still use it?
galleryThis post raises a good question: every networking setup had to start somewhere, whether that was a single switch or the whole stack at once.
For a lot of people, it’s one piece that got them hooked on the ecosystem before it grew into something bigger.
What was the first Omada gear that found its way into your network like an AP, a managed switch, or the controller software itself? And is it still running today, or has it been retired/relegated to a drawer after upgrades?
I'm curious how many people are still running their “starter” Omada device years later.
r/Omada_Networks • u/fraygoxx • 3d ago
Solved How does the SG2428LP handle class 0 devices against its 150w PoE budget?
Still pretty new to PoE so bear with me. I’m planning to move my cameras onto an SG2428LP and want to make sure I’m not going to hit the budget wall.
There’ll be about 10 cams total. Prometheus shows them peaking right around 9w each, so real draw would be ~90w worst case. The catch is my current switch sees every one of them as class 0, and from what I’ve read class 0 means 15.4w gets set aside per port. 10 of them would be 154w, which is a hair over the 150w the LP is rated for.
So what I’m really trying to find out is whether the LP budgets off what the port is actually pulling or off the class, and if it’s the class whether it’ll just refuse to power the last cam. Also curious if you can still cap power per port or set priority once it’s adopted in Omada (I run the controller on-prem), or if those settings disappear in controller mode.
If anyone has a pile of class 0 devices on one of these I’d love to hear how it went.
r/Omada_Networks • u/derpasticous • 3d ago
Pioneers Week 3: Cameras on their own VLAN, and the only thing that fought back was the Reolink
Week 3 of the Omada Networks Pioneer Program was segmentation and security: VLANs, ACLs, DPI, IDS/IPS, content filtering, and making sure the cameras still record after you lock them down. Same gear as last week: Fusion Pro 2.5G PoE (fw 4.0.1, Network 6.3.20.1, Surveillance 2.3.1), EAP772 V2 (fw 1.10.0), the 8MP bullet and turret (fw 1.0.7), and the Reolink Duo Floodlight. Before touching anything I ran 3 WAN speed tests as a baseline: 1.14-1.18 Gbps down, 1.14-1.17 up, 2-3ms.
DPI was already on from setup, so that part was just looking. In one day it saw 109 GB across 129 apps, and 92.5 GB of that (86%) was Steam. Fair. The category and app breakdown is nice, but I couldn't find a way to see which apps a specific client was using. The client panel doesn't have an app section that I could find, and clicking an app just gives you its description.

Content filtering next. The ad blocker was already on, and it works the way you'd hope. Ad domains like googleadservices.com come back as not existing, and that still happens if a device asks 1.1.1.1 or 8.8.8.8 directly, so the gateway is catching all plain DNS, not just its own. The catch is encrypted DNS (DNS over HTTPS). A browser or phone with secure DNS turned on walks right past it. That's how DNS filtering works everywhere, not an Omada thing, but worth knowing.
Safe Search forces Google, Bing, YouTube, and DuckDuckGo into safe mode. Google locked SafeSearch to "Filtering on" with a message that someone on the network controls it, and YouTube on my phone showed "DNS restrictions: Strict". Strict, not moderate, so that's the strongest YouTube restriction. My PC's browser still said YouTube restrictions were off, which I'm pretty sure is that browser using its own secure DNS. I turned Safe Search back off later in the day because YouTube on strict at home was annoying, and Google's SafeSearch page unlocked right away, so the lock was definitely coming from the Fusion.


IDS/IPS was the most interesting part of the week. You get Detect Only (IDS) or Detect and Prevent (IPS), and three security levels: Low turns on 5 of 12 threat categories, Medium 8, High all 12. Alerts don't show on that page. They live under Map > Threat Management Map.

The classic test page (testmynids.org) is a parked domain now, and the original testmyids.com didn't trigger anything at any level. What did work was a request with a known-bad user agent ("BlackSun"), which needs High since user agents aren't in Low. That showed up as Major, "A Network Trojan was Detected", with my PC as the source. Alerts took about 3.5 minutes to show up and needed a manual refresh.

Before I even tested anything, it flagged my ZimaOS box for things like a DNS-over-HTTPS lookup, a mesh VPN domain, and a .life domain. Those are informational rules, but every one of them is labeled Category "Malware". That's a scary word for "your NAS looked up a DNS server."

Then I switched to IPS. It let the first 3 bad requests through, and on the 4th it dropped everything from my PC to that server: web, HTTPS, even ping. Every other site still worked. The block lifted by itself after about 3.5-5 minutes. I ran it twice and got the same thing both times, then ran the exact same test in Detect Only with a fresh site. Nothing got blocked, so it was definitely IPS doing it. The problem is you'd never know from the UI. The Block List stayed empty the whole time, the alerts don't say anything was blocked, and the IPS alerts showed up 7-9 minutes late. If this hit a real device, it would just look like one site randomly stopped loading.


Speed with IDS on: basically no cost on my line. The dashboard speed test didn't move (1.15-1.16 / 1.14-1.15 Gbps), but that test runs on the gateway itself, so it may not even go through IDS. From my PC on speedtest.net I got 794-855 down with IDS off, 848-894 on Low, and 827-876 on High, with upload at 945-949 every time. Off wasn't faster, so the run-to-run swing is bigger than anything IDS costs on a 1 Gbps plan. One gotcha: when I turned IDS back on after the off test, the security level reset to Low instead of the High I had before. Easy to think you're on High when you're not. I left it on, Detect Only, High.
App-based ACL worked first try once I got the rule to save. I blocked TikTok for just my phone: TikTok wouldn't load on the phone over Wi-Fi, and tiktok.com still loaded fine on my PC. App rules are deny only (Permit greys out). Two things tripped me up. My phone showed up twice in the device picker because of its private MAC address, and the first time I hit Apply nothing happened except two boxes turning red with no message. Those boxes are the LAN/WAN interface pickers, and they're required even though they look optional.


Then the camera VLAN. I made a "Cameras" network on VLAN 20 (10.69.20.x). When you type the gateway address, the DHCP range stays at 192.168.20.x until you hit "Update DHCP Range", so it's easy to save a pool that doesn't match the network. The confirm screen also shows every port ticked, which looks like it's about to move your whole network. It's actually just adding VLAN 20 as tagged and nothing moves, but that explanation is in a box you have to scroll to see.


Moving the Omada cameras was easy. Change the port's native network to Cameras, power-cycle the port from the controller, and about 90 seconds later the turret was back at 10.69.20.2 and the bullet at 10.69.20.3, recording and live in Guard. After last week, I was ready for the bullet to drop off again. It didn't. Right after each move, playback looked like it had stopped recording, but it was just the timeline being a few minutes behind (same thing I hit last week).


The Reolink was the one that fought back. First it had a static IP, so I switched it to DHCP before moving anything. Moving it would have stranded it otherwise. After the move the network side was fine (10.69.20.4), but Guard kept it pinned to the old IP and showed it Disconnected. There's no IP field to fix it in Guard, so the only way was to Forget it. The Forget dialog lets you keep all the recordings, which I did. Guard found it again on the new VLAN within a minute, I adopted it, and the old footage was still there under the re-adopted camera. Total gap was about 12 minutes. So Omada cameras follow you to a new subnet on their own, and third-party cameras don't.



Last were the access rules: two Gateway ACL rules so the cameras can't start connections to my main network or to the internet. My PC can still open the cameras' web pages, so the rules only block traffic the cameras start, which is what I wanted. All three cameras stayed live and kept recording, with no new gap in playback after the rules went in. I don't have a test device on the camera VLAN, so I couldn't directly prove "camera to main network" is blocked from the camera's side. I also set the three camera ports to block tagged traffic (Network Tags: Block All), which turns them into plain access ports on the camera VLAN, so nothing plugged into those ports can tag its way onto the main network. Cameras didn't notice.


Remote access still works too. With Wi-Fi off on my phone, the cameras loaded fine in the Omada Guard app over cellular. Guard goes through the Fusion, though, so that doesn't tell you whether the cameras themselves can reach the internet. To check that I used the Reolink app, which connects to the camera through Reolink's cloud. After I rebooted the Reolink by power-cycling its port from the controller, the Reolink app on cellular couldn't connect to it, while my Reolink doorbell on the main network still worked fine. So the WAN deny rule does stop the camera from starting new connections out.
Two things I learned getting there. There's also an "Enable Internet Access" switch on each LAN (under Advanced Settings), separate from the ACLs. And locking things down doesn't cut connections that are already open. With Internet Access turned off on the camera network, the Reolink app kept showing live video until I rebooted the camera, and only then did it stop connecting. So after you lock down a network, reboot the devices on it, or you might just be looking at an old connection. One result I still can't explain: earlier, the Reolink app showed live video over a connection the camera opened after the ACL was already on. My "can't connect" checks were about 2 minutes after a reboot, so I'm going to retest with a longer wait.
Overall: DPI, the ad blocker, and app blocking all just worked. IPS works too, but it blocks silently, and that needs fixing before I'd trust it on a network other people use. The VLAN move was painless for the Omada cameras and a pain for the third-party one.
First week in this program without a factory reset. The Reolink made me Forget it instead, which is basically the same thing with extra steps.
r/Omada_Networks • u/Puzzleheaded-List734 • 3d ago
Help and Support Trade Up Programs
I filled out the trade up program to trade in my ES210X-M2 v1.0 for a SG2210XMP-M2 yesterday. I haven't received the 40% code to purchase the new switch.
Can a Omada support look into this?
r/Omada_Networks • u/Squanchy2112 • 4d ago
Omada Camera Omada Cameras my experience
I know others have been weighing in lately on their experience on the Omada cameras and NVR through the Pioneer Program. I wanted to give some thoughts from my end BUT not re-iterate everything others have said and keep mine more brief as I am doing a more technical dive on the product.
So.
I have access to some gear across different platforms as I run a small network consultancy and have a day job where I work with this stuff regularly.
I thought I would compare a really common Unifi G6 Bullet camera to the Omada ones as the Omada have a better price point and even the user experience jumping in is superior as you are not locked into a specific networking platform as a whole plus storage issues.
Lets let the images speak for themselves. I think they have a lot to say, the price differencial here is real. Choose what fits your ecosystem but consider Omada, their networking and now camera stack is impressive value.
Now for some weird crap I may be the only one to have tested.
- NVR setup/password stuff-During setup you have to make a password, no big deal normal stuff, the password requirements here are INSANE! I appreciate strong security but my god cant have two of the same character in a row any numbers repeating etc its too much. Let me make my security suck if I want this is supposed to be a small business class product it doesn't need to pander to the lowest common denominator everywhere. (I am not advocating using bad password or lowering security WITHOUT other precautions in place externally)
- So I had set my password up to something weird, forgot it. I was curious about this as during setup there is a warning about how the password is not easily recovered and you will have to contact TP Link support etc. Well turns out, because I had setup Omada Guard app I could reset the password that way with this nifty code scanner and code generation tool in the app. So that worked great.
- The detection UI is so much better than Frigate or Unifi in my experience. Both Frigate and Unifi have a much larger feature set but they are also a lot older so this has no where to go but up.
- Time zone-Why are we not polling NTP by default, I also didnt get dropped in to change my time zone or time so here I am with my recordings a hot mess.
I do recommend these I think they are an excellent value for features and hardware.
r/Omada_Networks • u/DogeOfUpvotes • 4d ago
Discussion Me: Can’t wait to play with my Fusion Gateway! The humble defective power supply: you sure?
So yeah just got around to opening my Fusion 2.5g PoE Gateway and excitedly plugged it in and got nothing. Tried different AC cables, nothing. Finally busted out a multimeter and lo-and-behold the power supply is DOA. Guess it’s time for more waiting while the ticket gets sorted out
r/Omada_Networks • u/David_Omada • 4d ago
Official Hey everyone! Two updates from the Omada team in Brazil 👇
🎓 Omada Expert: free technical training (already underway, you can still join)
Omada Expert is our free technical training program for people who design, install and operate networks. The program has already started and two classes have been held, but you can still jump in: just watch the recordings of the previous classes and follow along from there.
Who can join?
- Anyone already working with Omada, or planning to
- ISPs, integrators, IT technicians, consultants and resellers
- Network professionals
- From anywhere in Brazil, since the training is 100% online
What's included: 4 modules, a Specialist Exam, and a Bootcamp in São Paulo. The Bootcamp winners go to China! ✈️ It's free from start to finish.
- Sign up: https://conteudo.tp-link.com.br/programa-omada-expert
- Catch up on past classes: https://conteudo.tp-link.com.br/lp-gravacoes-omada-expert
🚀 Webinar: Omada Fusion Gateways launch
Get to know the new Fusion Gateways lineup, its key differentiators, and how it fits different network scenarios. It's a new generation of connectivity built to help your business grow.
- Date: November 19, 2026
- Time: 10:00 AM (BRT)
- Where: Online, via Microsoft Teams
- Register: https://events.teams.microsoft.com/event/2f7156e4-1113-44f8-a52a-4304b89465fb@82e2caa8-bfdb-4e72-bb1b-2aded5d3c408?source=copyLinkLegacyShareEventDialog
Questions about either one? Drop them in the comments and we'll help out!
r/Omada_Networks • u/rsf1234 • 4d ago
Help and Support Data usage on backup WAN
I recently added an ER701-Outdoor-5G as a backup WAN. My understanding of the settings below are that it would only be used for traffic when the primary link is unavailable. I have the connection test set to every 2 minutes.
However in 4 days this port has used >250MB of traffic which seems very high for this setup. I have received no alerts that the primary link has failed.
Have I misconfigured or misunderstood something?

The network comprises:
- OC200 hardware
ER8411 connected to:
- FTTH modem connected to WAN5
- ER701 in passthrough mode on WAN6
- 2x PoE switches
- 5x EAP245
All are running latest firmware.
r/Omada_Networks • u/Xidd333 • 5d ago
Pioneers Kit#1: Omada Guard Thoughts
Before joining the Omada Pioneer Program, my NVR setup was Frigate NVR running on Proxmox. For this part of the review, I'll mainly focus on the core functionality of Omada Guard, my experience using it alongside my existing setup, and a few features I'd love to see added in the future.
It's worth mentioning that Omada Guard is still relatively new, while Frigate has been around for several years and has a much more mature feature set. So I'm not expecting the two to be on the same level just yet. That said, I've been pretty impressed with what Omada has put together so far.
Omada Guard Overview
One of my favorite things about the Fusion is how it brings network management and NVR management together in one interface. Switching between the Network and Guard interfaces is quick and seamless using the icons shown in the screenshot below. It's a small thing, but having everything accessible from one place makes day-to-day management much more convenient.
The mobile app is actually pretty good. The interface is clean and straightforward, and it supports multi-camera live viewing. Clicking into an individual camera gives you access to its event history and continuous HD recordings.
One thing that really stood out to me is the notification speed. Compared to my Frigate setup, Omada Guard notifications generally arrive just as quickly, and in my testing, they're often a split second faster. Remote access and notifications have been very responsive overall.


Event Detection and Notifications
The Event page gives you a consolidated view of events across all your cameras. Different icons help identify the type of detection, including humans and vehicles. Line-crossing events have their own orange arrow icon, making them easy to distinguish.
One recommendation I'd make is to use line-crossing detection strategically to reduce unnecessary notifications. For example, if your camera faces a busy street, enabling general human and vehicle detection can generate a lot of alerts throughout the day.
For my front driveway camera, I prefer using line-crossing detection so I only receive notifications when someone actually enters my driveway. You can also adjust the minimum and maximum object sizes to help filter out unwanted detections.
I've found these settings useful for keeping notifications relevant without having to turn down detection sensitivity across the board.


Case Center
Case Center is another useful feature available through the desktop interface. It allows you to create a case and add relevant video footage to it. Once you've put together a case, you can generate a shareable link with password protection and an expiration date.
I can see this being particularly useful when you need to share security footage with law enforcement or someone else without having to manually export and send individual video files.

Third-Party Camera Support
Omada Guard also supports third-party cameras through RTSP and ONVIF, which is a big plus if you're transitioning from an existing camera system.
I added one of my Hikvision cameras through RTSP, and Omada detected and integrated it right away. I did run into an issue with recording to the NVR, which I've reported to the Omada team. They're currently working on a fix.
It's nice to see that Omada isn't limiting Guard exclusively to its own cameras.
Camera Quality
The Omada cameras have an all-metal construction, and the overall build quality feels solid.
One thing I noticed when comparing the turret camera's sub-stream to my Hikvision camera is the resolution difference. The Omada sub-stream is 848x480, while my Hikvision camera offers 1280x720. There is also currently no option to manually adjust shutter speed on the Omada camera.
That said, the available night vision modes are quite versatile. I've been using Human/Vehicle Trigger Full-Color most of the time, and it's worked extremely well.
When someone enters the camera's field of view, the camera activates its light and switches to full-color night vision. As shown in the screenshots below, it took only about 2–3 seconds for the camera to switch to full-color mode after the Amazon delivery driver stepped out of the van.
I've also included some side-by-side screenshots comparing the Omada camera's sub-stream and main stream against my Hikvision camera.
From what I can see, the Omada camera produces better color and image detail than my Hikvision camera in these comparisons. Overall, I'm really impressed with the image quality, particularly the full-color night vision performance.






Features I'd Love to See in Future Updates
Coming from Frigate, there are a couple of features I really enjoy that I'd love to see Omada consider implementing down the road.
1. Custom Object Detection Models
One of the biggest advantages of Frigate is its support for custom object detection models. Depending on the model being used, it can identify a much wider range of objects, such as delivery trucks, garbage trucks, dogs, cats, and other objects.
Omada Guard currently focuses on human and vehicle detection. That covers the majority of everyday security scenarios, and I have to say the detection accuracy has been excellent so far. I haven't encountered any false alerts during my testing.
Still, having the ability to expand object detection through additional models would make Guard even more versatile.
2. Facial Recognition
Another Frigate feature I really like is facial recognition. Being able to identify familiar faces and receive notifications when a known person is detected is genuinely useful.
This is something Omada Guard doesn't currently support, but I've already submitted it as a feature request. I'd love to see this added in a future release.
Overall Thoughts
Overall, I've been really impressed with Omada Guard so far. The camera quality is excellent, notifications are extremely responsive, and remote access is quick and straightforward.
But what really makes the experience stand out is the integration with Fusion. Having network management and NVR management unified under one interface is incredibly convenient. Instead of managing separate systems, everything is accessible from one place.
There are definitely features I'd like to see added, especially a desktop multi-camera dashboard, expanded object detection, and facial recognition. However, I think Omada has built a very solid foundation.
One thing I particularly appreciate is how approachable the interface is. Even someone who isn't particularly tech-savvy (like my wife) could navigate the system and manage the cameras without much trouble.
For a relatively new NVR platform, I think Omada is off to a very good start, and I'm looking forward to seeing how it develops over the next few updates.
r/Omada_Networks • u/Due-Zucchini-1566 • 5d ago
Product Recommendation Is there an equivalent Omada solution to the UniFi Flex Mini 2.5G?
r/Omada_Networks • u/LieutennantDan • 5d ago
Product Recommendation Omada switch and AP to pair with an OPNsense edge?
Currently running an ASUS RT-AC66U B1. It's end of life, no longer getting firmware, and it's also the bottleneck: 800/35 Comcast through a Motorola MB8611, and I measure about 500 Mbps down while upload sits at full rate, so the router's NAT is what's capping it.
I'm replacing it with bare-metal OPNsense on a 4x 2.5G box. OPNsense becomes router, firewall and DHCP. Pi-hole stays on DNS. Proxmox runs the rest of the services, and I'd like to run the Omada software controller there as an LXC instead of buying an OC200.
I'd rather not add an Omada gateway and end up with a second router in front of
OPNsense that I don't need, so what I'm trying to work out is how to do the
switching and wireless side cleanly.
- Without an Omada gateway, does anything break? Can APs and switches be adopted and managed by the controller alone, with OPNsense handling VLANs and DHCP?
- Software controller as an LXC on Proxmox, or is the OC200 worth it at this size? Looking at 8 to 16 ports and 2 or 3 APs, not a campus. And if the controller is in a container on a different VLAN from the APs from day one, what's the least painful way to get them adopted?
- EAP772 versus something older and cheaper. I don't have Wi-Fi 7 clients yet and I'd rather not pay for a radio generation I can't use, but I also don't want to buy something that stops getting updates in a year.
Happy to hear anyone's input. I'd rather find the trap now than after the money is spent.
r/Omada_Networks • u/Cellarboat • 5d ago
Discussion Anybody got the $50 off coupon?
I got sent a survey email last week, completed it and never got this coupon. I even email the omada store support and not even after 3 emails and 6 days later got a response from them, do any of you got it?
r/Omada_Networks • u/Character_Artist7192 • 6d ago
Product Recommendation Help picking a switch for a Ubiquiti U7 Express 2-pack - Pro Max 16 PoE vs Omada 16-port 2.5G vs Flex 2.5G + PoE combo
Hey everyone,
I have 2 Gbps fiber with CAT6 drops in every room, in a 2,500 sq ft two-story house. I'm replacing my TP-Link AXE5300 with the Ubiquiti Whole Home WiFi 2-pack, which as far as I can tell is just two U7 Express units.
I need a switch to hardwire the second U7, my two home offices, and my NAS back to the main router. I also have 3 PoE security cameras, plus TVs, an AV receiver, PlayStation, printer, smart bulbs, and dozens of IoT devices. Most of them have a CAT6 drop nearby, and wired would be nice for some of them, but it's not a must. I'm trying to stick to a 16-port switch to keep the cost down.
I'm torn between these three:
- Ubiquiti Pro Max 16 PoE
- Omada 16-port 2.5G switch (SG3218XP-M2 V2) - all 2.5G ports
- Ubiquiti Flex 2.5G 8-port + Ubiquiti 8-port 1G PoE switch
One thing I care about is seeing live and historical bandwidth usage per device. My assumption is I'd still get that with the Omada switch, since all the clients would still show up in UniFi. Is that right?
What are the pros and cons of each? What do I actually gain or lose going with one over the others?
This is my first time using Ubiquiti. My last setup used cheap Amazon switches and one died after about 3 years, so I'm trying to do this right this time.
I'm fairly tech-savvy, so happy to answer follow-up questions if I'm missing any details. Thanks in advance!
r/Omada_Networks • u/platapusdog • 6d ago
Help and Support Help needed: PPSK supported on EAP772 6 GHz
Hello folks,
I am trying to understand if PPSK is supported on 6 GHZ on EAP772. I am seeing contradicting information on it being limited to 2.4/ 5Ghz so wanted to ask before I spent a whole lot of cycles going down the rabbit hole.
This is for six EAP772 access points (FW 1.5.5), OC300 (FW 1.36.25 / Omada Network 6.3.0.111). I am using an external FreeRADIUS and no Omada gateway (I use PFSense).
Im trying to figure out if:
- PPSK with RADIUS supported on 6 GHz for this hardware version? I don't want to run pre-release or eval firmware.
- Can I use WPA3-SAE and can a single SSID span 5 and 6 GHz with MLO enabled?
- Is per-key VLAN assignment via RADIUS supported on 6 GHz, and which attributes are expected (Tunnel-Password, Tunnel-Private-Group-ID)?
From the questions I'm asking you can probably figure out that Im trying to assign different devices to VLAN's based on login. This works great on 2.4 and 5 Ghz but 6 seems to be kinda bleeding edge.
Many thanks in advance!