r/TpLink • • 8d ago

Official When Someone Asks for Your Wi-Fi, What Do You Do?

4 Upvotes

Friends or family are over, someone pulls out their phone, and eventually you hear:

“Hey, what’s your Wi-Fi?”

Do you tell them the Guest Network password? Pull up a QR code? Maybe you’ve gone a step further and set up an NFC tag, printed card, smart display, or something else entirely.

Guest Networks provide a convenient way to share Wi-Fi with visitors while keeping your main network separate, and with holiday gatherings just around the corner, we’re curious how everyone actually handles sharing their network with guests.

Here are just a few ways you can get guests connected a little easier:

  • QR Code: Let guests scan and connect rather than typing in the network information. If you're expecting a crowd, you can print the QR code and leave it somewhere easy to find.
  • Password: Keep it simple and share the Guest Network name and password, type it in for them, or leave the details somewhere your guests can see them.
  • NFC: Some users have found creative ways to use NFC tags to provide or launch Wi-Fi connection information with a tap.
  • Something Else: Maybe you use a password manager, printed card, smart display, home automation, or your own DIY solution.

What's your Guest Network Setup?

QR code? Password on the fridge? Something more elaborate? Let us know how you make it easy for guests to connect!


r/TpLink • • 5h ago

TP-Link - General Wired vs wireless Backhaul

4 Upvotes

I bought a TP-Link Deco BE65, but had a question for all of you.

I have the setup for both satellite WAP's to be wired but using Cat 5E. Would it be better for me to set them up with a wireless backhaul, or is the Cat 5E going to give better throughput across the mesh?


r/TpLink • • 40m ago

TP-Link - Technical Support Which TP-Link router has lasted you the longest?

1 Upvotes

so i'd rather buy something that lasts than pay extra for the newest wifi version. i stream films in the back room and want a connection that doesn't need restarting halfway through.

budget is around £100, could stretch to £130 if it's worth it. who's had their TP-Link router for 4 years without issues? and which model is it?


r/TpLink • • 1h ago

TP-Link - General Wifi verbeteren op eerste verdieping nieuwbouwwoning

Thumbnail reddit.com
1 Upvotes

r/TpLink • • 3h ago

TP-Link - Technical Support Can't log into Control Panel on browser.

Post image
1 Upvotes

Hello, I picked up this TP-Link TL-WR841N off of Ebay and upon arrival it would not let me log in to the control panel on the browser. I tried factory resetting it by holding the button on the back but typing admin for the username and password still won't work, any ideas on what I should do?


r/TpLink • • 8h ago

TP-Link - Technical Support Devices on XE75 Pro

1 Upvotes

I was using a M5 mesh with 5 hubs with a separate IoT network and everything had been working fine. The hardware was 6 years old, so I upgraded to XE75 Pro 3 pack.

Now everyday my smart devices - plugs, dyson and Raspberry pi loose connectivity everyday and need to be re - set up and in case of Pi I need to click connect each time.

This morning, Dyson is just refusing to connect to wifi even after multiple resets.

Has anyone experienced and / or resolved this?

Tried multiple things but I am starting to wonder if I bought a lemon..


r/TpLink • • 8h ago

TP-Link - Technical Support Bricked FR205

1 Upvotes

I have a Festa FR205 with a failed OpenWrt install. Now it displays the TP-Link recovery, but none of the images load successfully. There is a de-brick procedure, but I don't want to open it up and solder a connector.

I want to keep it, but I need someone to de-brick it for me. Any takers?


r/TpLink • • 10h ago

TP-Link - Technical Support ethernet backhaul defective.

0 Upvotes

New Deco 7 Pro Tri-Band BE14000  not using 10g ethernet backhaul. I can't find any manual way to set this up. Are there any tricks I can try before I sent it back to Amazon? Thanks.


r/TpLink • • 12h ago

TP-Link - Technical Support Defective BE 1300 unit - common or bad luck?

0 Upvotes

After 2 weeks of troubleshooting with Gemini and Claude, I gave up, and here is the summary of my router (by Gemini):

On one specific satellite node (connected via wired Ethernet backhaul), the 6 GHz radio completely falls apart under load despite sitting right next to it with a great signal:

Signal: RSSI -48 to -53 dBm, Noise -92 dBm (~44 dB SNR)

Negotiation Collapse: Link rate drops to `8 Mbps` and stays hard-locked at MCS Index 1 (NSS 1)

Real-World Speed: Downlink/Uplink tank to 29–58 Mbps with massive loaded latency (1.49s / 40 RPM on `networkQuality`)

How I Isolated It: Same node, other bands:Wired Ethernet, 2.4 GHz, and 5 GHz (160 MHz) on this exact same unit work flawlessly—negotiating at `1441–1633 Mbps` (MCS 8) and pulling 840+ Mbps down (`1200+ RPM`, 0% packet loss).

Other nodes: The other two Deco units in the same 3-pack work completely fine on both 5 GHz and 6 GHz.

Multiple clients: Reproduces identically on both an M4 Pro MacBook Pro and a Windows 11 desktop with a Qualcomm FastConnect 7800 Wi-Fi 7 card.

What I Already Tried (No Permanent Fix):

  1. Verified all nodes are on the latest firmware
  2. Tested both 320 MHz and 160 MHz channel widths on 6 GHz
  3. Disabled QoS, MLO, Fast Roaming (802.11r), Beamforming, and IPv6
  4. Ran Network Optimization, rebooted, and did a full factory reset on the node

Has anyone else seen a single Deco BE13000 / BE67 unit develop a dead or degraded 6 GHz radio like this while 5 GHz stays rock solid?


r/TpLink • • 16h ago

TP-Link - Technical Support Archer TBE550E - slow download, fast upload

1 Upvotes

I have a 10 Gbps symmetric FTTH and bought Archer TBE550E for my pc.

I get extra slow download speed and ultra fast upload.

The shop refunded me without asking questions.

Any ideas what I'm doing wrong?

I had an Asus adapter earlier and I had 300-400 MBps in both directions, so it's not the PC

Edit: solved it with 2 steps and gemini 4. Seems there's a known bug on mediatek chips. Run this in powershell: Disable-NetAdapterRsc -Name "Wifi TP-Link"

And go to tp link Nordic page and take the latest driver of August 2026


r/TpLink • • 18h ago

TP-Link - Technical Support Deco BE63 5GHz Performance Question

0 Upvotes

I have had my BE63 set up (4 nodes) for several months now. I have a 1Gbps ISP connection. No issues on wired connection. I get near full speed. Wi-fi is not, but is been better in past. Wi-fi was both stable and great performance, across all bands until recently. Now:

6GHz - I used to consistently get 700 - 850Mbps. Now, my wife's laptop with Realtek Wi-fi still breaks the 700 Mbps mark. I have a Intel Wi-fi6E card in my desktop that gets about 550Mbps now...it used to be better. My Pixel 9 Pro phone set to Wifi7 gets over 800Mbps.

5GHz - I only get 400 - 550 Mbps, even when close to a node (including main router), and with Wi-fi 6 160Hz.

Is there some other setting I should check in the Deco app, or can you confirm what settings I should have enabled/disabled to see if that is affecting performance? I am on the latest firmware.


r/TpLink • • 19h ago

TP-Link - General Deco X20 as Unifi U6 Lite

Thumbnail github.com
1 Upvotes

r/TpLink • • 1d ago

TP-Link - General Nice addition to my TL-WR3602BE travel set

Post image
2 Upvotes

Just bought myself a travel router TL-WR3602BE to make setting up my holiday (public) Wifi setup a little bit easier and safer.

Planning to add my home Wifi network credentials so all devices automatically connect when on holiday.

Just got a nice addition to my Wifi travel kit from my wife, a travel pouch. So I can take the TL-WR3602BE with accessories 😅

Just a thing you expect to be included with specific travel equipment!


r/TpLink • • 1d ago

TP-Link - Technical Support BE11000 ethernet backhaul fails

0 Upvotes

I just got a replacement set if 3 decos and ethernet backhaul crashes network. The units work fine when all left to connect wirelessly. As soon as I connect the 2 satellites to the main deco the network fails. The tplink switch's lights start blinking rapidly, mybpc disconnects from the network [connected via ethernet] my s24 ultra losses wifi connection and speeds on laptop connected via ethernet drops. I've had many conversations with support which lead me to replace the previous be11100. There must be a solution here.


r/TpLink • • 1d ago

TP-Link - Technical Support CPE 510s for Christmas lighting controllers

0 Upvotes

I’ve spent way too many maddening hours on this already. Help.

I have a computer at 192.168.0.10 plugged into the wan side of a CPE510 that is acting as an access point, 0.1. I have 3 other CPE510 devices at 0.2-0.4, connected back to the access point as clients. I have 3 devices, each connected to a CPE510, with IPs 0.51-53.

From the computer, I can ping all the CPE510, but I cannot see the devices attached to them. I’m at my wits end as to why.

Any ideas? I can ping them connected to physical switch, but not across the CPEs.


r/TpLink • • 1d ago

TP-Link - Technical Support TP LINK ax3000 cannot add Nordvpn

1 Upvotes

I bought a tp link ax3000 router and I wanted to setup Nordvpn but when I go to advanced/vpn client I am unable to add anything can I assume this router does not support Nordvpn, firmware is up to date

Firmware Version: 1.2.2 Build 20260810 rel.19227(4341)

Hardware Version: Archer AX55 v4.0


r/TpLink • • 1d ago

TP-Link - Technical Support Deco Speeds slow down compared to ISP router

0 Upvotes

I'm trying to find a solution to this problem that I've been having. Sometimes my Deco network will just randomly slow down compared to the speeds I get when running speedtest connected directly to the router, even standing a couple of feet from the main Deco. I reboot the system and the speed goes back to normal but for some reason it goes right back down. I sometimes notice the Deco system disconnects (if I'm playing online at the time or something) and after that when it comes back on the speeds on the Deco network are down to about 1/3 or 1/2 of the router's speed. Anyone got any clues? I got 3 S4 models running on firmware version 1.6.2 Build 20240718 Rel. 69205


r/TpLink • • 1d ago

TP-Link - Technical Support tp link model TL-WN722N monitor mode

0 Upvotes

Español and English Post

https://easyosinstall.wordpress.com/2026/11/20/tp-link-wireless-modo-monitor/

Seguro que habéis buscado por internet y solo encontrais que este modelo de tp link TL-WN722N es imposible ponerlo en modo monitor.

PUes no es así, aquí os incluyo dos scripts para que lo cambiéis a modo monitor , capturéis paquetes y puedan hacer AUDITORIA DE SISTEMAS.


r/TpLink • • 2d ago

TP-Link - Technical Support Tracking 1.3.10 Build 26111312 Rel. 33541 - Deco Firmware Update - BE67 & BE1300

13 Upvotes

1.3.10 Build 26111312 Rel. 33541

This firmware was released today, 11/19/2026 for the BE67 and Be13000 and possibly other models. If you update to this please post your evaluation of the update here. If you are not going to update please tell us why. Thanks.

My system has been extremely stable and I plan to wait a couple of weeks.


r/TpLink • • 2d ago

TP-Link - Technical Support Nodes no longer recognize ethernet backhaul - did I hallucinate

Post image
5 Upvotes

This is my current set up as it relates to ethernet cables and are set up in access point mode. I have ethernet cables wired around the house and wired backhauled to each node. My deco app was showing that all 3 were wired and was working great for a year. Recently, had a network outage. When it recovered, the nodes no longer recognize the wired backhaul and only connect wireless backhaul to the main deco. This is causing spotty connections. The more I search, the more confused I get as there are conflicting information that I need a switch. I'm positive I had this set up work and the app showed the correct ethernet wired symbols between the nodes. TPLink's help page says I can just directly connect all of them to the ATT router as they are set to access points yet my connection is not great. Is there a fix for this or am I just plain wrong and I need to put a switch between the main deco and the other 2 decos? I've tried doing reboots/resets/hard factory resets and no fix, just keeps going back to the wireless backhaul. When I did the reboot, I did reuse the same SSID, would that cause issues? (Didn't want to have to login to all my connected devices).

I have the XE75 AXE5400
version 3.10.669 app
Firmware: 1.5.0 Build 20260603 Rel. 14401


r/TpLink • • 2d ago

TP-Link - Technical Support Deco 7 BE65 Pro/BE11000 AFC support?

Thumbnail gallery
0 Upvotes

Just picked up a Deco 7 BE65 Pro/BE11000 3 pack mesh system from Best Buy on an early BF deal for $399.

I got it set up and it’s working great. While messing with the app/settings, I noticed an AFC setting in the settings, and this was already enabled by default. When I open the AFC sub-menu, it states AFC is enabled and boosting the 6GHz band.

Did the BE65 Pro get a hardware revision or firmware update that allows AFC? I looked everywhere and can find no mention of the BE65 Pro having AFC support, including TP-Link’s website, Best Buy’s website, or the product literature in the box.

I did however learn that the Deco app hides settings that aren’t compatible with your hardware, so if it didn’t have the functionality it should not be showing up as a setting.

Either way, if it is supported that’s a great added bonus I wasn’t counting on. Screenshots below


r/TpLink • • 2d ago

TP-Link - Technical Support Downloading games on Xbox/PC/PS5 completely stops every other device in the house

1 Upvotes

Hello everyone, basically what the title says. I switched to ATT and realized the router they provided is terrible range wise, so we got the x55 system for the house. It works great except for when something is downloading. The entire household comes to a complete halt except the download (tested across multiple devices) and does not work until download is complete/paused. I have tried multiple things I see online but nothing is working. I have the fastest speed on fiber, so it’s not a speed tier issue that I know of.

Any tips would be appreciated.


r/TpLink • • 2d ago

TP-Link - Technical Support TP-Link TL-SG105E LED Configurability

0 Upvotes

Hi,

Can anyone please confirm if it is possible to disable all LEDs via the web interface on the TL-SG105E? Including network activity/status and power?

I have found reports of the larger switches in this series being able to, and the general guide for the smart management UI indicates that it’s possible but for TL-SG105E it says:

“LED configuration is only available on certain devices. To check whether your device supports this feature, refer to the actual web interface.”

I don’t want to have to purchase the product to find out if it has this functionality.

Any help would be greatly appreciated.


r/TpLink • • 2d ago

TP-Link - General Prometheus exporter for the TP-Link Archer A6 v4

1 Upvotes

I asked claude to build me a tool that gets information about who is using my router and what's the bandwidth per device etc. Basically, eveyrthing useful from the gui. I run that tool on my raspberry pi, which has is always on as it runs my VPN and other stuff. I then use victoria metrics on the PI to parse that and have it on a dashboard along with other metrics. I think it might be useful to some people that like playing around.

https://github.com/brighk/tplink-archer-client-monitor