r/Tapo • • 1d ago

Official Heads Up! Instagram “Fall In” Giveaway for US Users

Post image
4 Upvotes

Sharing this for anyone in the US who may be interested: our social team is running an Instagram giveaway over the next few days.

🍂 Fall In. Enter to Win. 🍂

Check out the giveaway post on Instagram and follow the instructions in the description for a chance to win. Additional terms, conditions, and eligibility details are available on the Instagram post.

Enter Here on Instagram


r/Tapo • • 22d ago

New Feature New Voltage and Current Monitoring for Tapo Plugs! What are You Monitoring in Your Home?

Post image
17 Upvotes

Recent updates to a few smart plugs and our smart outlets have expanded their energy monitoring capabilities to include two new data points: Voltage and Current!

Learn More and View Current Compatibility: Voltage and Current Data Now Added to Tapo Smart Plugs and Outlets

While compatibility is limited and the feature is just starting to roll out to models, we look forward to seeing it added to additional models in the future. Keep an eye on your device's firmware updates and catch up on the latest additions every month in our monthly update review!

What Will You Use the New Energy Monitoring Values to Monitor?

What Model Do You Want to See the Feature Added to Next?


r/Tapo • • 15h ago

Need Advice Tapo d260 4k installed

Thumbnail
gallery
46 Upvotes

Not much of a review but initial impressions. My previous was the d130? The d260 is HUGE and so much better built. Image quality is also a good jump better. Lots of good image settings for color and has HDR.

My only complaint is it's 4k at 15fps. For the price it should be at a minimum 20fps. Paired with the h500 hub in seconds and it's good to go. I'll post more after I get some time with it.


r/Tapo • • 9h ago

Troubleshooting and Support Beyond disappointed

8 Upvotes

I had posted before. I moved from blink to tapo. Solar c402 kits. One died and I begged tapo to replace it as it was bought from Amazon used market place. They were nice to do that.

Another died 2 weeks ago and then last night it got cold in Virginia and all the cameras lost 30% battery suddenly and struggled to charge all day and now out of 10 cameras I have 4 more dead.

Seriously tapo WTF. One could be bad. Two could be bad but 4 cameras together and it is not even below freezing yet

Thinking of putting the blinks back on

C402 v2 1.3.5 firmware. Solar is not charging at all. The solar charging graph is empty


r/Tapo • • 4h ago

Need Advice 24/7 capture detection for small animals?

2 Upvotes

Does the 24/7 capture help detect small animals like cats, raccoons, and skunks better than a PIR sensor on a battery camera like the C465?  What's your experience?


r/Tapo • • 8h ago

Troubleshooting and Support C325WB V2 keeps going offline (PoE Ethernet)

1 Upvotes

I have 3 C325WB’s. One is V1 and the other 2 are V2. All are Ethernet connected, with the V2’s using PoE.
I have one V2 that worked fine for about a month but is now going offline about once a day. LED on the front is red. I have to pull the PoE power at the switch and it comes back online after plugging back in.

Any thoughts, or maybe just a bad unit?


r/Tapo • • 10h ago

Troubleshooting and Support What happened to the timeline and scrubbing? C121

1 Upvotes

After some recent update the timeline bar has gotten a lot thinner vertically and makes it much harder to scrub through now. How can I revert back to the fatter timeline?

Hardware version 1.0
Firmware 1.9.4
iOS app version 3.22.801


r/Tapo • • 10h ago

Need Advice D260 wedge screws wrong size?

Thumbnail
gallery
1 Upvotes

Hi there. Just purchased a D260 doorbell camera to replace our older Tapo doorbell from around 4 years ago. Went to install it and realised to get the best vision from the doorbell I would need to use the 15% wedge. Problem is - the screws that Tapo have provided do not appear to be the correct size? They don't appear to be small enough to screw into the smaller holes on the wedge itself.

I've attached some photos to help clarify what I mean. Have I indeed been sent the wrong screws, or is there something I am missing about how these screws are meant to work? If these are indeed the wrong screws, can anyone tell me what type to get? I've been to 5 different stores trying to find the right screws, but nobody seems to know what size would actually fit.

Thanks in advance for any help anyone can give!


r/Tapo • • 19h ago

Need Advice Just Picked up the Tapo D260 Video Door Bell on the AMZ Black friday sale along with the H200

3 Upvotes

So I was looking to dumb my ring as I had enough paying for a camera that seemed to notify me after people were leaving my front door and the basic price was absurd for what it was. I was looking at the reolink but people had just as many issues as other brands and it was 2k.

So I waited for Black friday and the D260 had a $60 discount tp 159 so I bought one. In addition I ordered the H200 hub.

I am running lots of TP Link smart plugs and lights but use alexa for immediate control. I have not yet received either device. My concern is that the H200 was a waste of money. I have not yet found that once it is setup I can just remove the ethernet cable and run it on WIFI only.

I am not really interested in storing every event for posterity that happen in front of my door. Not yet ready to surround my home in cameras either. I just want to get rid of ring and have something that works and does not totally suck.

When I ordered the H200 I was thinking I would just put a 16gb SD in the doorbell and 256gb in the H200. Then the more I looked the more confusing the H200 became. I was going to hardwire the doorbell and use the H200 as my new chime. But I also have echos around my house.

  1. Can the H200 be used in WIFI only mode on my existing TP Link WIFI 7 mesh network after setup. No I have only a single network no sub networks setup.
  2. Will the H200 enable any additional functionality for the D260 video doorbell other than external storage and a chime.
  3. Will ithe H200 make the doorbell any faster to respond to my android phone?
  4. will the H200 sync the smaller sd card in the doorbell to its larger sd card
  5. Does the H200 make any difference to the dozen or so TP Link plugs/strips and Wifi lights I already have running

r/Tapo • • 1d ago

Projects I made a clamp so my Tapo C200 can point further down

Thumbnail
gallery
6 Upvotes

My first mount had a fixed angle and the camera still pointed too high. I added a toothed hinge so I can loosen the knob, tilt the camera and tighten it again. Both screws are printed too.

You can set the clamp opening and screw length to fit your own shelf. I put the files here: https://makerworld.com/en/models/3652886-tapo-c200-camera-clamp-mount-adjustable-tilt


r/Tapo • • 18h ago

Projects Tapo Discount Codes: US/UK/Germany/Italy/France & More

Thumbnail reddit.com
0 Upvotes

r/Tapo • • 1d ago

Need Advice Tapo Community?

1 Upvotes

Hi to all. I’ve recently purchased a couple Tapo cameras so am fairly new here. On a post I made here a week ago, someone suggested I join the Tapo Community (tp-link), which I did.

However, when I went to make a post they want to know the model number of the camera. It’s an actual drop down list where you must choose one.
One of mine is the Tapo C545D dual lens. This also has a model number of TC47.

But it always states that they cannot find that model. It then will not allow me to make a post.

Am I doing something wrong?


r/Tapo • • 1d ago

Need Advice Tapo Rv50 Omni vs Rv30 max plus gen 2

1 Upvotes

Hi All,

Just wondering what robot vacuum i should get? Seen a few bad reviews regarding rv50. RV30 is £170 currently and RV50 £290.

TIA


r/Tapo • • 1d ago

Need Advice Does Tapo H500 record locally if I turn off my router at night?

1 Upvotes

If I completely power off my main Wi-Fi router at night, will my paired Tapo cameras keep recording locally to the Tapo H500, or will they lose connection until the router is back on?


r/Tapo • • 1d ago

Need Advice Is an offline Tapo C200 with a private Tailscale viewer safer than using the stock app?

3 Upvotes

I'm testing this with one TP-Link Tapo C200 before moving the other cameras. The camera is on a separate Wi-Fi router with no internet uplink and wireless client isolation enabled. An Ubuntu gateway connects to that network over dedicated Ethernet. Its firewall blocks general forwarding between the camera network and the home LAN. The camera's RTSP feed is pulled locally by MediaMTX and shown in Safari using WebRTC. The page uses HTTP inside the encrypted Tailscale tunnel, with no public route, Funnel, or external STUN/TURN. The page and the separate WebRTC media port are restricted to two approved Tailscale devices. Camera credentials stay on the gateway, and the relay does not record.

Compared with using the stock Tapo app with its normal cloud connectivity, what risks does this actually remove, and what risks does it add? I'm especially interested in gateway compromise, firmware updates for an offline camera, whether private HTTP is a sensible trade-off, and whether the same design is practical for several cameras. What would you verify before trusting it long term?


r/Tapo • • 2d ago

Troubleshooting and Support Tapo Indoor C201 camera fails at the end of setup

1 Upvotes

I have been trying to setup my camera as I moved house. We are using the same Wifi as before but it was reconfigured so had to reset Tapo camera as well (since it wasn't connecting).

I am able to find the camera, connect to wifi, but pairing fails.
LED is blinking red and green.

Is there any way to resolve this?


r/Tapo • • 2d ago

Suggestions + Feedback 4K C575D Black Friday Sale

Thumbnail
link.amazon
6 Upvotes

Inventory on this camera has been spotty for months.

It's in stock and on a Black Friday sale so I finally ordered one.

Just thought I would let everyone know, grab it while you can.


r/Tapo • • 2d ago

Troubleshooting and Support Tapo keeps sending me ad notifications despite having it disabled

Thumbnail
gallery
5 Upvotes

To make matters worse, it's sent on the same notification channel as my motion detectors, which are placed in secure locations. So if I get a notifications while I'm not in there, I'm on edge and expect either somebody breaking in or a false alarm. To then see an ad, despite disabling it, is extremely frustrating to say the least.

This has happened multiple times over the last 2 months now. Does anyone have this issue or know how to "fix" it, assuming this isn't an intentional choice by TP-Link?


r/Tapo • • 3d ago

Projects Made an iPhone app that shows Tapo cams without the cloud, looking for testers

9 Upvotes

Hi all, solo dev here. I've been building an iOS app called Lanvio that plays IP cameras straight over your local network, no cloud, no account. Tapo works through RTSP/ONVIF.

It's in TestFlight right now and I'd love a few more Tapo owners to try it, especially models I don't have.

To make it work you need to turn on the camera account in the Tapo app first (Camera Settings → Advanced Settings → Camera Account). Then in Lanvio just scan your network, tap the camera and log in with that account.

It also does multiview, picture in picture, and works from outside if you've set that up.

TestFlight link: https://testflight.apple.com/join/gpe98232

If something doesn't work, tell me the model and I'll look into it. Thanks!


r/Tapo • • 2d ago

3rd Party Integrations DL110 & HA

2 Upvotes

Anyone else been messing around with the DL110 or had any success getting more capabilities out of it?
I’ve been using the integration from angelvals and have managed to get 33 entities working so far, including auto-lock, security settings, doorbell/speaker settings, calibration, and activity history.
Most of it is still read-only, but I’ve gotten quite a bit more functionality than I originally expected. I’m still working on expanding it and hoping to get even more out of it.
Just curious if anyone else has been experimenting with it or has made any progress beyond the original integration.


r/Tapo • • 2d ago

Troubleshooting and Support Issue connecting P430M outdoor dinner directly through Apple Home / Matter, but connected without issue via Tapo App?

2 Upvotes

Hello! Before I return this device (because it seems to be the only Matter listed outdoor dimmable plug I've seen), I wanted to check in here in case there are any undocumented steps I might take to get the plug working.

Basically I've tried:

  1. factory reset the plug, try to pair with iOS Appe Home app using QR Code
  2. factory reset again, and again, and try again...
  3. Pairing with the Tapo app, then trying to connect via Matter

To be clear, the Tapo app immediately recognized the device as soon as I open the app, adding it to the App was flawless and quick. The problem with that is I have no desire to use (or even install) a third party app, I specifically purchased the Matter device because I'd like to use it with Apple Home specifically.

Are there any non-obvious steps I should be taking to get the thing working with Apple Home directly?


r/Tapo • • 2d ago

Need Advice KS220 indicator LED solid orange. Switch doesn't operate

1 Upvotes

KS200 indicator LED solid orange. Switch doesn't operate

My home electric went off for a few hours. All the other Tapo KS220's in the house came back on line when the electric was restored.

One switch has a steady orange LED and doesn't work manually. Just a reset or is the switch FUBAR?


r/Tapo • • 3d ago

Need Advice Tapo P100 (AU/1.2

1 Upvotes

Bought the 2 pack yesterday but the Tapo app is unable to find any of them (connected at different times) it appears that the app wants to connect via Bluetooth but the devices are only broadcasting wifi signals.

I contacted tolink support they said devices are faulty. Is that even possible for 2 devices to act the same way? I even tried 2 different iPhones and factory reset.

When I connect to the p100 wifi I can visit the 192.168 address and I get “200 ok” but that’s about it.

Any thoughts on this would be appreciated


r/Tapo • • 3d ago

Troubleshooting and Support Cameras have bad detection?

Thumbnail
gallery
1 Upvotes

I have my C110 camera facing my entire front yard, road to door from a high up angle. Motion detection and person detection sensitivity are both set to 10. Full screen recording zone.

Sometimes, it will record a car arriving, but will not record the car leaving the property. The car is there approximately 2-3 minutes at most. What’s going on?

I’m using the latest firmware.