r/PLC • • 4h ago

Career Question Is the CCNA certification worth it?

11 Upvotes

Hi there,

I've been working as a controls engineer for about 2 years now. One of the main weaknesses I have identified is everything network related. I have worked with it in a limited capacity and get quite overwhelmed with a lot of the terminology. So I'm not super confident in that area and a mistake can become a disaster quite quickly.

So I'm thinking of doing the CCNA certification. For those of you that have done it, is it worth the time/money if I'm not aiming for a career in IT?


r/PLC • • 4h ago

PLC Question Dwyer TSX3-500122

2 Upvotes

Is there anyway to utilize this to simply control a relay that controls a heater via a single temp probe. I’m having a hard time getting it to work.


r/PLC • • 20h ago

Career Question Is it possible to actually not travel so much in this field

32 Upvotes

Hey guys, so ill be looking for a job in a couple of months and have thought about Automation since my masters is robotics and really did enjoy everything from plc programming through ROS and all.. and kind of like the idea of always doing some problem solving while staying kinda hands on. And just wanted to ask what are chances for not being sent somewhere out of the country or the city id be stationed in. Regions that I'm looking at are mainly Germany, Austria, Switzerland, Slovenia..

Thank you all in advance for any advice and shared experiences.

Also if people are willing to share what kind of salary to expect id appreciate it!

Edit: thank you all for so many answers! It makes my life at least a little easier when choosing!


r/PLC • • 4h ago

PLC Question Has anyone recovered a V-SFT v6 file-open password on a Hakko MONITOUCH V9100iSD (V9 generation)? Old V6-V8 tools reportedly don't work

1 Upvotes

I'm the electro-technical officer on a ship. Our alarm and monitoring system runs on a Hakko MONITOUCH V9100iSD panel with an Omron PLC, delivered in 2022. I have the V-SFT Ver.6 project file, but it's protected with a file-open password (max 6 characters) that I don't have.

The panel integrator and the shipbuilder have both gone quiet and don't answer anymore. I need to maintain this system and I'm locked out of my own equipment.

Has anyone here successfully recovered or removed a file password on the V9 generation (V-SFT v6 / V9100 series)? The old tools floating around for UG files and the V6-V8 series reportedly don't work on V9.

If someone with the right tools is willing to take a look, I can send a copy of the project file (with anything identifying scrubbed) by PM.

Thanks in advance.


r/PLC • • 21h ago

Career Question Automation / PLC /comissioning engineer salarys and travel

15 Upvotes

Hi!

Serious question about the salaries and travel times in this industry.

As someone with experience working in this field I would like to know how easy is to find a company that the travel can be inside 30/40% during a year (family considerations) and what would be a good salary, USA or Europe.

I am working as FSE for a Laser cutting company and I am studying all the areas to make the transaction to Automation Engineer, it takes a lot of time and energy (but is something i find interesting and helps also to be better at my job in troubleshooting) and I am curious what I can expect from the market.

Where I work there are semiconductores company that pays very well and I am wondering self doubting if all the effort is going to be compensated in the end in terms of quality of life. My ultimate goal is somehow to work as freelancer in a couple of years.


r/PLC • • 1d ago

Meme Choose Wisely This Weekend

Post image
273 Upvotes

r/PLC • • 1d ago

PLC Question Electrical maintenance technician getting started on PLC’s

Post image
45 Upvotes

I’d like to start off by saying this is a personal/company project. I haven’t been digging into PLC’s very long I’ve mostly just used them as a troubleshooting aid after not being able to find the problem in the field. This’ll be my first start to finish project including building the program and function testing.

In the picture above is a rough draft of the program I put together, a drawing of the control box, and an idea of the function of everything in the field. I plan on cleaning it up and everything I just want to see if yall have any pointers or suggestions on a way to make it work better.

Open to suggestions and criticism.

Just letting yall know as well I only have access to to Alan Bradley and click PLC’s I don’t know which my boss would prefer for me to use yet even though it’ll more than likely be the click just due to the size of it.


r/PLC • • 22h ago

Career Question Moving to Australia in a few months. Best city for PLC / Automation Engineers?

3 Upvotes

Hi everyone!

I'm planning to move to Australia in a few months and I'm wondering which city would offer the best job opportunities for a PLC Programmer / Automation Engineer.

I'm currently working in Italy for a large system integrator specialising in LGV systems and robotics (🦅) . My job involves automation software development, in-house testing and commissioning of robotic end-of-line cells, mainly working with FANUC robots, conveyors, and Stretch wrappers.

I'd like to continue working in industrial automation and robotics in Australia.

Which city would you recommend based on the current job market?

I'd really appreciate advice from people already working in the Australian automation industry.

Thanks!


r/PLC • • 1d ago

Engineering Question Anyone else hate the "Chicklet" wire markers?

Thumbnail
gallery
186 Upvotes

They are hard to read and bulky. Not to mention all different colors like a bag of Skittles! Wulftec Pallet Wrapper.


r/PLC • • 1d ago

PLC Question DEIF ie250 Controller

Thumbnail
gallery
7 Upvotes

Anyone worked with DEIF ie250 Marine controller?

I can see in the datasheet,

  1. Deif network Ethernet in bluelines in blue
  2. Deif network CAN bus in Green

Can both the 1) and 2) be used for load sharing of generators?


r/PLC • • 23h ago

Career Question Interview Exp at Honeywell

2 Upvotes

I have an Interview lined up in the coming days with Honeywell. Can u guys share your relevant interview exp at Honeywell for instrumentation roles? Also, the interview is on panel level on campus


r/PLC • • 1d ago

Video General Electric Siltrol-Plus

Thumbnail
gallery
25 Upvotes

PLC adjacent? Hoping this doesn’t get taken down :)

Thought this was too cool not to share. I’ve worked on a few of GEs Digital “Siltron” drives, but never heard of a “Siltrol” until today.

I knew I found something truly ancient when I saw that font haha. It was in a filing cabinet with some vacuum tubes.

Drawings are dated 1975! Back in the days when if you wanted to know why your drive was acting up you had to put a chart recorder on it.

Still sad GE sold out to ABB. The quality isn’t nearly what it once was.


r/PLC • • 1d ago

PLC Question FactoryTalk Design Studio vs FactoryTalk Conductor

10 Upvotes

Went and listened to the lecture about Design Studio in Boston this week. It sounds neat, but the question on everyone's mind was "how does it integrate with Studio Designer?" Unfortunately, it doesn't, which makes this an immediate "no go" for my company. We'll simply use Conductor for our AI vibe coding tests. Our AB reps asked me what I thought, and I told them it feels like AB is competing with themselves. They agreed pretty heavily. Does anyone have a use-case where they see themselves switching from Studio5000 to DesignStudio?


r/PLC • • 2d ago

Career Question What industries are really worth getting into for PLCs and automation?

35 Upvotes

I’m getting into the automation field and trying to figure out what direction I want to take my career. PLCs, robotics, controls, etc. are all things I’m interested in, but I’m curious which industries are actually the best to work in.
Is pharma a good industry? Oil and gas? Data centers? Semiconductor? Power generation? Manufacturing?
For those of you already working in automation, if you were starting over today, what industry and companies would you try to get into? I’m mainly interested in good money, opportunities to learn, and having room to grow long-term. I don’t want to spend 10 years in one place only to realize I could’ve been making significantly more or learning way more somewhere else.
What industries are the gold mines right now, and where would you go if you were in my position?


r/PLC • • 2d ago

Engineering Question New Powerflex 535 does not have Ethernet/IP STO.

34 Upvotes

Why Rockwell.


r/PLC • • 1d ago

Career Question How do I get started with PLCs/Automation?

16 Upvotes

I’m currently studying Industrial Maintenance and Electrical Technology, and I’m interested in getting into PLC programming and industrial automation as a career. I’d like to hear some advice from people who are already working in the field.
What would be the best way to get started while I’m still in school? Are there specific PLC platforms, software, certifications, or skills I should focus on to build my knowledge and gain hands-on experience?
Also, where would you recommend looking for entry-level job opportunities in this field? Are there certain companies, job titles, or positions I should be searching for to get my foot in the door?
Any advice or personal experiences would be greatly appreciated!


r/PLC • • 1d ago

Career Question How to become go-to for company automation.

0 Upvotes

I work for a manufacturing company that’s bringing in more and more standalone packaging and portioning equipment. The problem is we often struggle to define exactly what we need from vendors, and once the equipment arrives, technical support can be pretty poor.
I’d like to help fill that gap by becoming our internal automation resource and helping specify and integrate new equipment, troubleshoot and modify existing machines, and build our maintenance teams’ capabilities.
My background:

  • 20+ years in manufacturing, engineering, and operations.
  • Experience troubleshooting high-speed production equipment.
  • Several years programming Honeywell TDC systems, developing HMIs, and working with instrumentation in chemical processing.
  • Some PLC/ladder logic experience from college about 20 years ago.
  • More recently worked as an engineering/project manager and Plant Director.

I’m looking to get back into technical, hands-on work, but my controls programming experience is pretty dated. I also don’t have a lot of electrician experience other than some 24v controls stuff.

My question: What’s the best way to build the skills needed to fill this role?
Should I take PLC courses, buy a trainer, or start learning from our existing equipment? We have several machines with ongoing issues and limited OEM support, so I’m tempted to start there.
I’m not trying to become a full-time PLC programmer, just someone capable of understanding, troubleshooting, modifying, and integrating our equipment.
Would appreciate any advice from those who have taken a similar path.


r/PLC • • 2d ago

PLC Question Monitor a multiple instance DB

Post image
18 Upvotes

Hi all

I hope you are well

how I can monitor this Fb .it is a local Fb as the photo shows and there are several of them in this fb205 .

any idea please


r/PLC • • 1d ago

PLC Question How did you keep your skills up when between leaving school and landing your first job?

7 Upvotes

Especially if you don't have access to hardware/software anymore.

I was hit by a drunk driver, and one lasting side-effect is (long/short-term) memory loss, so I constantly have to keep repeating things I learn.


r/PLC • • 2d ago

Engineering Question Resources for learning cams and advanced motion in Rockwell (Studio 5000 / Kinetix)?

18 Upvotes

Hi all,

I'm a controls engineer working on pharma packaging machines. I already know motion on other platforms (SIMOTION, Codesys/PacDrive, Siemens TIA) and I'm comfortable with basic Rockwell motion: MAJ, MAM, MAS, homing and axis configuration.

Now I want to go deeper into the advanced side of Studio 5000 motion:

Electronic camming (MAPC, MATC), building cam profiles and calculating them at runtime (MCCP)

Position cam vs. time cam: when to use which, and pitfalls with master/slave setup

Gearing (MAG) with clutching, phase shift (MAPS) and registration

Coordinated motion (MCLM/MCCM, MCS) and kinematics (MCT)

Cam tuning and smooth transitions between cam profiles on the fly

Kinetix 5700 drive tuning and load observer settings

Can you recommend good sources?

Rockwell manuals or publication numbers that are worth reading (not just the instruction reference)

Sample projects, the Rockwell Sample Code Library, or GitHub repos

Courses (Rockwell training, Udemy, YouTube channels) that go past the basics

Books, or anything you wish you'd known when you started with cams

Real-world tips are welcome too, like "don't do X with MAPC" or how you structure cam tables in a project.

Thanks in advance! 🙏


r/PLC • • 2d ago

Career Question Pharma Only Wants Pharma

36 Upvotes

Has anyone experienced Pharma not hiring people not already in Pharma?

I've read a lot about GMP and cGMP.

How is this any different from a PSM process or nuclear industry? The chemical and nuclear industries don't seem to have this prejudice against outsiders yet they have very similar standards. It doesn't really make much sense to me.

Edit: My conclusion is that hiring managers have seen a lot of people who have never worked in pharma decide they hate the excessive documentation and leave after a short period of time.


r/PLC • • 2d ago

Homework Project/Excercise ideas

4 Upvotes

So I build this basic home PLC testbench to learn more about PLCs, Industrial automation and electrics. I already built a basic blinking light setup that uses the 3 point switch to switch between button operation and blinking. At the moment I wired it up for a basic relay latch to get a better idea of relay logic. Do you have some Ideas for Projects or excercises with these Parts?


r/PLC • • 2d ago

PLC Question Two sensors One input

Post image
23 Upvotes

Can someone explain the wiring for those sensors and how can be achieved. My understanding is that one sensor has to be falgged to supply power to the second one. Is that correct, how can this be wired to one M12 connector?


r/PLC • • 2d ago

PLC Question Emulate 3D and modeling powder flow

7 Upvotes

Has anybody had any experience with using Emulate 3D to model dry bulk material powder flow through piping, into hoppers, through valves, etc? Just curious if it has a physics engine that can handle that, and curious if anyone has done it before.


r/PLC • • 3d ago

Career Question Amazon Automation Engineer Intern – Houston, TX

19 Upvotes

I recently received an offer for an L4 Automation Engineer Internship at Amazon in Houston, TX, for Summer 2027. I'm an electrical engineering student and would be relocating to Houston for the summer.

I was wondering if anyone has experience with this role, particularly regarding full-time return offers and location flexibility.

A few questions:

  • What does a typical day look like for an Automation Engineer Intern?
  • How common are full-time return offers for Automation Engineer Interns?
  • If I receive a full-time return offer, would I be required to stay in Houston, or could I request a position at an Amazon facility in northeastern area?
  • Has anyone successfully received a return offer for a different location than their internship?
  • How is the work-life balance, salary progression, and overall career growth in this role?

Would really appreciate some feedback!