r/RetroAR • • 5h ago

Diet Retro The retro parts project.

Post image
24 Upvotes

BKF A2 upper

BA Mid length gas government 16" barrel

Unrivaled A2 siege brake

Midwest Industries 2 piece free float 9" handguard

BKF carry handle rail, waiting on Aimpoint PRO

GRIFFIN mk1 blem lower

Troy ambi mag release

CMMG Zeroed bolt catch

BCM MK2 buffer system

Law Tactical Gen S folder.

Geissele SSA Trigger

GG&G Shorty foregrip

I didn't really clone anything, but I'm happy with the results.


r/RetroAR • • 6h ago

My attempt at drilling a 3rd hole in a 2 position receiver extension

Thumbnail
gallery
21 Upvotes

Don’t have access to a drill press but it came out pretty decent considering all I used was a cordless power drill with a 5/16” bit and two C clamps. Drilled a little too far to the left and into the ridge of the receiver extension but was able to drill a small pilot hole on the right of the hole to get it more centered on my second attempt. The stock pin sits in the hole surprisingly well and has the same amount of wobble as the factory holes. Gave the stock a couple of good smacks too and it’s nice and secure.

If anyone wants to attempt this without a drill press it’s actually pretty easy granted you have a vise or some C clamps. I measured the exact distance from the front face of the stock (see red line in 4th pic) back to the center of the locking pin inside the stock body. It came out to 2 3/8” for me. I then slid the stock onto the tube, shouldered the rifle in my chest rig to find the sweet spot, and marked the buffer tube right where the front edge of the stock sits with a pencil. After that, I removed the stock and measured backwards (toward the rear of the tube) 2 3/8” from the pencil mark. I then marked the spot for the new hole with a pencil and drilled it out.


r/RetroAR • • 10h ago

I call it the ACE Omega Holosight Gangster Laser Blaster

Thumbnail
gallery
80 Upvotes

r/RetroAR • • 17h ago

That Real Gourmet Shit The Son Tay Raid

Thumbnail
gallery
79 Upvotes

On the night of 21 November, 1970, 56 years ago, OPERATION IVORY COAST, the raid on the Son Tay prisoner of war camp in North Vietnam was successfully executed. I took these pics a few years ago at the JFK Special Warfare Museum on Fort Bragg. This is the actual sand table used to plan the mission, as well as some other items from the raid. That is not a real XM177e2 Carbine, but the single point optic and mount look authentic and were probably used on the raid.


r/RetroAR • • 18h ago

Diet Retro Finally putting together a retro-mod build. I’ve picked up what I have here over the last year or two. I’m having decision paralysis on the more functional parts of the build. It’s my first AR, though I’ve owned and shot countless other firearms. Any suggestions on what to prioritize for my budget?

Post image
11 Upvotes

OCM6
DD Omega 7
H&R C7 upper with smith enterprises pic rail
PSA Squirrel-15 lower
Also I have an arcfire v1 with the mill spec trigger (I’ll upgrade the trigger later)


r/RetroAR • • 20h ago

Work In Progress, Chill Out New to ARs, picked up a RRA LAR-15 carbine-need tips on light mount

4 Upvotes

Hi everyone, I just picked up this nice classic looking M4 AR-15. I got a scout mount (IWC TMC Scout Mount-N-Slot) and went to the local gun store to get it installed because I have pretty weak hands and couldn't push the delta ring down to remove the handguard. They managed to remove it but said the gas tube was interfering with the mount.

I don't want to use another kind of mount, I see that another user made a post of a similar comment regarding the gas tube and installation but his account is since then deleted so I can't ask how or what he did to "bend" the heat shield/guard to make it work. How would I go about doing this? Also, a picture of the AR because I'm just proud of how it looks :)


r/RetroAR • • 20h ago

Save the date: December 2, 2026 is when oral arguments are scheduled to take place over the specific issue of if local or state governmentd are allowed to restrict or ban AR, AK or other rifles.

Post image
22 Upvotes

r/RetroAR • • 22h ago

Diet Retro Faux Gordy-ish build

Post image
51 Upvotes

BKings 11.5” 733 style Upper
OCM6
OCL “Midway” mount
RRA Entry Stock
Temp Colt 4x until AGW M5000 can be acquired
CMC 2 stage “Combat Curve” trigger, but will probably replace with FRT w/ normal AR trigger blade
Chrome sand cut KAK down-vent/dual ejector bolt carrier
Had to grind off Bayo lug for clearance, but I like how it came out.


r/RetroAR • • 1d ago

Kentucky gunshop find

Post image
40 Upvotes

20 dolla makes em holla


r/RetroAR • • 1d ago

H&R M-16a1

Post image
255 Upvotes

Just picked this up. Slapped og furniture on it. Can't decide if I'm happy with the grey anodizing job on it or not. Wouldn't mind it a shade tad lighter.


r/RetroAR • • 1d ago

Tape switch for 6p

Post image
4 Upvotes

Is this the right cap for adding a tape switch to a surefire 6p?


r/RetroAR • • 2d ago

Diet Retro GUU-5/P GWOT era tribute done for now

Thumbnail
gallery
42 Upvotes

Shown with my 12" 6.5 Grendel retromod C7 carbine that now sports clamshells, CAR stock, CQB handguard rail with Bauer light and P&S grip.

Build data;

14.5 Dirty Bird chrome lined phosphate M4 barrel with pinned F FSB

Brownell carbine gas tube and KAK A2 flash hider with lock nut (I'm lazy lol)

KAC M4 quad rail

Late model black anodized Colt 6520 A2 upper with M4 ramps

Registered SBR Anderson lower (again, dumb state requires Fed paperwork to be lawful 🙄)

Schmidt tool trigger group

CMMG springs and pins

Random A2 grip

Not sure who made this 6 position mil spec sized carbine stock, has same two positions as military 2 position stock plus 4 in between

H2 buffer and spring

Brownell M4 stock with 8FW25 CAGE code

I just need to get it out and do a few mags breaking in and sighting in.


r/RetroAR • • 2d ago

How much heat can a charging handle spring handle?

2 Upvotes

I'm wanting to recoat a couple of my charging handles using Norrells moly coat.

It needs 300 degrees for a hour or so to cure.

I tried taking one apart years ago and gave up trying to get it back together after struggling with that damn small roll pin and kinda don't want to have to try it again if I don't need to.


r/RetroAR • • 2d ago

M4 delta and OCM5 pipes

Post image
114 Upvotes

Left rifle - Colt 14.5” socom barrel, microbest bcg, Aimpoint comp2, bad attitude lower, H&R c7 gray upper, Colton armory car stock, model1 buttpad

Right rifle - centurion 14.5” midlength, OCM5, palmetto m16a2 lower, h&R black A2 upper, microbest chrome and phosphate small bits bcg, b5 car stock and model 1 buttpad.

Polished GI triggers, both have EZ tube gas tubes.


r/RetroAR • • 2d ago

Handguards

Post image
65 Upvotes

Anyone make clamshell handguards for the kitty kat?


r/RetroAR • • 2d ago

Retro / Retro Mod

Thumbnail
gallery
128 Upvotes

M4 / Gordy Clone
Then retro-mod Gordy

Can’t decide how I want it lol


r/RetroAR • • 2d ago

Transitional A2 and DOEish

Post image
224 Upvotes

Receivers cerakoted a retro grey and purple anodizing match. The A2 lower started as a 601 profile 80% that I lasered to look like an overstamp rearsenal lower


r/RetroAR • • 3d ago

That Real Gourmet Shit Need to get another RX01 so I can do this clone justice, but the 518 will do for now

Thumbnail
gallery
157 Upvotes

r/RetroAR • • 3d ago

Work In Progress, Chill Out Finished my a1 build (dont mind the black handle, working on that)

Post image
63 Upvotes

r/RetroAR • • 3d ago

That Real Gourmet Shit Colt AR-15a2 carbine

Thumbnail
gallery
131 Upvotes

Not sure what you would call it but here we are finally complete


r/RetroAR • • 3d ago

BROWNELLS best butt stock tool for spanner nuts back in stock.

Thumbnail
gallery
10 Upvotes

r/RetroAR • • 3d ago

Garden-variety retromod

Thumbnail
gallery
69 Upvotes

My RRA midlength HBAR and my ALICE kit. Nothing you haven't seen before, but I'm pretty happy with how they turned out.


r/RetroAR • • 3d ago

Diet Retro Just because it's old doesn't mean it's not gold

Post image
142 Upvotes

r/RetroAR • • 4d ago

Work In Progress, Chill Out Any way to darken up a lower a bit?

Post image
23 Upvotes

Rifle has actually been built and in use for around 16 years or so, but the modern black lower has always bugged me so I finally picked up a H&R lower to "finish" the rifle properly.

The lower does look nice, but it is sadly way too light gray for my liking.

Is there any easy way to darken it up a bit without having to completely refinish everything to match?

I do have some Norells gray/black Colt that I was thinking I could use for just the lower but that's a bit too dark.


r/RetroAR • • 4d ago

That Real Gourmet Shit RRA LAR-15 PD trade in

Thumbnail
gallery
91 Upvotes

I just got my first actual retro non clone police trade in today. It has the restricted government markings and the name of the police department. I assume the number 5 is the assigned number for this rifle?
There's an S that is taped on the front side of the magwe!!.
Besides cleaning up the rifle with some CLP, I changed out the well greased two stage hammer with a mil spec. Removed the disconnector and replaced it with a trigger kicker. Because my spare Kabuto was not seating correctly. As if the walls were too narrow. I also replaced the BCG with a mil spec M16 version. Yes, plan on keeping the two stage trigger and the original BCG. I have a new version of the Rock River LAR-15 which has the carry handle and the two stage match trigger in it.
It's going to remain stock.
I picked it off of GB for about five Benjamin's.
Obviously it spent all of its time in the midwest.
Fabricated and assembled in Cleveland, Illinois and I assume it was in service in Lansing Illinois which is a suburb of Chicago. Maybe it was Michigan?
Maybe someone else would know? What do ya’ll think?