r/RetroAR • • 23h ago

H&R M-16a1

Post image
248 Upvotes

Just picked this up. Slapped og furniture on it. Can't decide if I'm happy with the grey anodizing job on it or not. Wouldn't mind it a shade tad lighter.


r/RetroAR • • 15h ago

That Real Gourmet Shit The Son Tay Raid

Thumbnail
gallery
74 Upvotes

On the night of 21 November, 1970, 56 years ago, OPERATION IVORY COAST, the raid on the Son Tay prisoner of war camp in North Vietnam was successfully executed. I took these pics a few years ago at the JFK Special Warfare Museum on Fort Bragg. This is the actual sand table used to plan the mission, as well as some other items from the raid. That is not a real XM177e2 Carbine, but the single point optic and mount look authentic and were probably used on the raid.


r/RetroAR • • 8h ago

I call it the ACE Omega Holosight Gangster Laser Blaster

Thumbnail
gallery
60 Upvotes

r/RetroAR • • 20h ago

Diet Retro Faux Gordy-ish build

Post image
47 Upvotes

BKings 11.5” 733 style Upper
OCM6
OCL “Midway” mount
RRA Entry Stock
Temp Colt 4x until AGW M5000 can be acquired
CMC 2 stage “Combat Curve” trigger, but will probably replace with FRT w/ normal AR trigger blade
Chrome sand cut KAK down-vent/dual ejector bolt carrier
Had to grind off Bayo lug for clearance, but I like how it came out.


r/RetroAR • • 23h ago

Kentucky gunshop find

Post image
39 Upvotes

20 dolla makes em holla


r/RetroAR • • 18h ago

Save the date: December 2, 2026 is when oral arguments are scheduled to take place over the specific issue of if local or state governmentd are allowed to restrict or ban AR, AK or other rifles.

Post image
22 Upvotes

r/RetroAR • • 3h ago

Diet Retro The retro parts project.

Post image
17 Upvotes

BKF A2 upper

BA Mid length gas government 16" barrel

Unrivaled A2 siege brake

Midwest Industries 2 piece free float 9" handguard

BKF carry handle rail, waiting on Aimpoint PRO

GRIFFIN mk1 blem lower

Troy ambi mag release

CMMG Zeroed bolt catch

BCM MK2 buffer system

Law Tactical Gen S folder.

Geissele SSA Trigger

GG&G Shorty foregrip

I didn't really clone anything, but I'm happy with the results.


r/RetroAR • • 4h ago

My attempt at drilling a 3rd hole in a 2 position receiver extension

Thumbnail
gallery
17 Upvotes

Don’t have access to a drill press but it came out pretty decent considering all I used was a cordless power drill with a 5/16” bit and two C clamps. Drilled a little too far to the left and into the ridge of the receiver extension but was able to drill a small pilot hole on the right of the hole to get it more centered on my second attempt. The stock pin sits in the hole surprisingly well and has the same amount of wobble as the factory holes. Gave the stock a couple of good smacks too and it’s nice and secure.

If anyone wants to attempt this without a drill press it’s actually pretty easy granted you have a vise or some C clamps. I measured the exact distance from the front face of the stock (see red line in 4th pic) back to the center of the locking pin inside the stock body. It came out to 2 3/8” for me. I then slid the stock onto the tube, shouldered the rifle in my chest rig to find the sweet spot, and marked the buffer tube right where the front edge of the stock sits with a pencil. After that, I removed the stock and measured backwards (toward the rear of the tube) 2 3/8” from the pencil mark. I then marked the spot for the new hole with a pencil and drilled it out.


r/RetroAR • • 16h ago

Diet Retro Finally putting together a retro-mod build. I’ve picked up what I have here over the last year or two. I’m having decision paralysis on the more functional parts of the build. It’s my first AR, though I’ve owned and shot countless other firearms. Any suggestions on what to prioritize for my budget?

Post image
9 Upvotes

OCM6
DD Omega 7
H&R C7 upper with smith enterprises pic rail
PSA Squirrel-15 lower
Also I have an arcfire v1 with the mill spec trigger (I’ll upgrade the trigger later)


r/RetroAR • • 18h ago

Work In Progress, Chill Out New to ARs, picked up a RRA LAR-15 carbine-need tips on light mount

4 Upvotes

Hi everyone, I just picked up this nice classic looking M4 AR-15. I got a scout mount (IWC TMC Scout Mount-N-Slot) and went to the local gun store to get it installed because I have pretty weak hands and couldn't push the delta ring down to remove the handguard. They managed to remove it but said the gas tube was interfering with the mount.

I don't want to use another kind of mount, I see that another user made a post of a similar comment regarding the gas tube and installation but his account is since then deleted so I can't ask how or what he did to "bend" the heat shield/guard to make it work. How would I go about doing this? Also, a picture of the AR because I'm just proud of how it looks :)


r/RetroAR • • 23h ago

Tape switch for 6p

Post image
4 Upvotes

Is this the right cap for adding a tape switch to a surefire 6p?