r/S2000 • u/Kyle_K16 • 2h ago
r/S2000 • u/QQtacular • 18h ago
PPI shop recs near Islip, Long Island? Buying a 2005 AP2 remotely
Hey all, I'm looking at a red 2005 AP2 with about 65k miles at a dealer in Islip, NY. I'm buying from out of state and probably shipping it, so I won't see the car in person before I pay. Does anyone have any recommendations for any shops in the area?
Thanks
r/S2000 • u/masmasterr • 18h ago
🚨🚨 BLACK FRIDAY SALE 🚨🚨
We have plenty of brands on a Black Friday sale. Some of the included brands are Advan, BBS, HKS, Enkei Rays, Revel and more.
If you are looking for something in particular. Please feel free to send me a PM for a quote.
r/S2000 • u/kbuckle90 • 19h ago
Always see this on a walk
Decided to take a photo today. A sweet older lady drives it
r/S2000 • u/MITA_Motorsports • 6h ago
EMS shipping is back at MITA Motorsports
Hi all — MITA Motorsports here. We used to ship by EMS before COVID, and we've just brought it back as a shipping option on our store, alongside FedEx.
EMS is the cheaper option for lighter parts — for example, a small item to Australia comes out at $22.34 by EMS. Rates are by weight and shown at checkout. One exception: EMS is not offered for addresses in the USA, so US orders remain FedEx only.
New to EMS? EMS vs FedEx, quickly:
EMS is Express Mail Service — the international express service of the postal networks. We hand your parcel to Japan Post, and your own postal service delivers it at the other end (USPS in the US, Royal Mail in the UK, Australia Post, and so on). It's tracked, and it's significantly cheaper than a courier for light parts. The trade-offs: it's slower than FedEx, it only leaves Japan in our Friday batch, and compensation for loss or damage is limited.
FedEx is a private courier, end to end. Faster, with full courier tracking door to door, and it ships on our normal dispatch schedule rather than once a week. It costs more, and it's the option we recommend — especially for expensive orders.
In short: light part, not in a rush, want the cheaper rate → EMS. Anything valuable or urgent → FedEx.
r/S2000 • u/Aggressive_Skirt_825 • 2h ago
Headgasket question
Good morning. Just looking for more information or confirmation or validation.
Long story: my mk6 gti got totaled in October. I am leaving for Germany (military) in January. I went to Missouri to pick up my s2000 that’s been in climate controlled storage for 7 years. All my stuff is gone due to the move, so I am using a friends garage.
To recommission it I changed the following: oil, oil filter, diff fluid, trans fluid, fuel pump, fuel strainer, fuel pressure regulator, drained the fuel tank (looked pristine), new injectors, coil packs, spark plugs and did valve clearances.
It eventually started, went to 2000 rpm for about 2 seconds, then went to 500 rpm and had rough idling. Anytime you gave it gas, it’s die. So I relooked at everything I had done. Kept having the same problem. Eventually did a compression test, 160 on cylinder 1,2,3, cylinder 4 is 120. Put some oil down the spark plugs tube, did it again. 130.
So then I did a leak down test. 40 psi. Hooked up to cylinder 4 at TDC, and air escaped from cylinder 3’s spark plugs tube. No where else. Coolant expansion tank was silent, throttle body silent, exhaust silent.
So then I did a leak down test on cylinder 3. Put it at TDC, pressurized, and no leaks at all. I would have figured that the air would have gone to 4 as well if the headgasket was bad betwixt the two cylinders… but I have no idea.
Anyways, my question is, if anyone has any ideas or advice or has dealt with something similar, please give me input. Does the 10 psi increase in cylinder 4 while pressurizing imply bad piston rings for 4?
Currently going to pull the head later today, and inspect to see what it looks like.
Thanks for your time! Pics attached in case anyone wants to take a gander.