r/S2000 • u/turahvr13 • 1h ago
S2K
Cool video I came across about the s2k
r/S2000 • u/Aggressive_Skirt_825 • 2h ago
Good morning. Just looking for more information or confirmation or validation.
Long story: my mk6 gti got totaled in October. I am leaving for Germany (military) in January. I went to Missouri to pick up my s2000 that’s been in climate controlled storage for 7 years. All my stuff is gone due to the move, so I am using a friends garage.
To recommission it I changed the following: oil, oil filter, diff fluid, trans fluid, fuel pump, fuel strainer, fuel pressure regulator, drained the fuel tank (looked pristine), new injectors, coil packs, spark plugs and did valve clearances.
It eventually started, went to 2000 rpm for about 2 seconds, then went to 500 rpm and had rough idling. Anytime you gave it gas, it’s die. So I relooked at everything I had done. Kept having the same problem. Eventually did a compression test, 160 on cylinder 1,2,3, cylinder 4 is 120. Put some oil down the spark plugs tube, did it again. 130.
So then I did a leak down test. 40 psi. Hooked up to cylinder 4 at TDC, and air escaped from cylinder 3’s spark plugs tube. No where else. Coolant expansion tank was silent, throttle body silent, exhaust silent.
So then I did a leak down test on cylinder 3. Put it at TDC, pressurized, and no leaks at all. I would have figured that the air would have gone to 4 as well if the headgasket was bad betwixt the two cylinders… but I have no idea.
Anyways, my question is, if anyone has any ideas or advice or has dealt with something similar, please give me input. Does the 10 psi increase in cylinder 4 while pressurizing imply bad piston rings for 4?
Currently going to pull the head later today, and inspect to see what it looks like.
Thanks for your time! Pics attached in case anyone wants to take a gander.
r/S2000 • u/MITA_Motorsports • 6h ago
Hi all — MITA Motorsports here. We used to ship by EMS before COVID, and we've just brought it back as a shipping option on our store, alongside FedEx.
EMS is the cheaper option for lighter parts — for example, a small item to Australia comes out at $22.34 by EMS. Rates are by weight and shown at checkout. One exception: EMS is not offered for addresses in the USA, so US orders remain FedEx only.
New to EMS? EMS vs FedEx, quickly:
EMS is Express Mail Service — the international express service of the postal networks. We hand your parcel to Japan Post, and your own postal service delivers it at the other end (USPS in the US, Royal Mail in the UK, Australia Post, and so on). It's tracked, and it's significantly cheaper than a courier for light parts. The trade-offs: it's slower than FedEx, it only leaves Japan in our Friday batch, and compensation for loss or damage is limited.
FedEx is a private courier, end to end. Faster, with full courier tracking door to door, and it ships on our normal dispatch schedule rather than once a week. It costs more, and it's the option we recommend — especially for expensive orders.
In short: light part, not in a rush, want the cheaper rate → EMS. Anything valuable or urgent → FedEx.
r/S2000 • u/masmasterr • 18h ago
We have plenty of brands on a Black Friday sale. Some of the included brands are Advan, BBS, HKS, Enkei Rays, Revel and more.
If you are looking for something in particular. Please feel free to send me a PM for a quote.
r/S2000 • u/QQtacular • 18h ago
Hey all, I'm looking at a red 2005 AP2 with about 65k miles at a dealer in Islip, NY. I'm buying from out of state and probably shipping it, so I won't see the car in person before I pay. Does anyone have any recommendations for any shops in the area?
Thanks
r/S2000 • u/kbuckle90 • 19h ago
Decided to take a photo today. A sweet older lady drives it
Hello! I recently picked up a used 02 S2000 and was doing some maintenance under the valve cover. Noticed some heat on one of the cam caps, removed it, and founding scoring on the journals.
Does anyone have a camshaft holder assembly available for purchase?
Thanks!
r/S2000 • u/TaeTwoTimes • 1d ago
Hey guys and Happy Holidays! Hope you all enjoy time with your families and have safe travels.
The time is here! If it’s anything, and I mean ANYTHING, you are after or have been looking to get now is the time to let me know! A lot of you have already reached out and locked in orders early. To those who haven’t, I carry pretty much EVERYTHING from OEM to ASM. Just let me know what you are needing!
Thanks for your time. Happy Holidays!
r/S2000 • u/Fun-Organic • 1d ago
Snapped a few photo's of one of the cleanest S2000's I ever seen. Believe this was 4-5 years ago @ Good Guys in Columbus
r/S2000 • u/Happy_Apple_6008 • 1d ago
Looking at a 2003 S2000 AP1, black on black, with 230k miles for $11,000.
Seller has owned it for 8–9 years, since 104k miles. Original engine and transmission, mostly stock, all 10 VIN stickers present, extremely clean underside, and no reported accidents.
Oil changes every 3k miles, reportedly burns only half a quart between changes. New timing chain tensioner and clutch assembly (less than 500 miles).
I want an S2000 to drive regularly (8–10k miles/year), modify, and potentially keep forever. I’m comfortable rebuilding or replacing the engine down the road.
Would you buy this at $11k, or spend another $3–5k for something with 120–160k miles?
Would love to hear from high-mileage S2000 owners!
Curious how they compare to everyone’s favorite golden coilovers
EDIT: All sets have been sold! I will be designing and 3d printing my own male clips since I have extra OEM female clips. Reach out if you're interested!
I wanted to replace my side strake clips, but after ordering on Amayama, I was told that they were discontinued and out of stock (plus it was like $35 shipped). Ended up ordering some off yahoo auction in Japan, there are too many so I wanted to recoup the cost I paid to get them (I overpaid😭).
If anyone is looking for some, I have 3 sets of these OEM clips that I'm willing to sell to recoup how much I spent! $30 per set shipped (U.S. only)!
r/S2000 • u/PkmnGr33n • 2d ago
I saw this yellow top when looking at ap2 wing spoilers.... to be honest a silver soft top doesn't look as good as the yellow top
r/S2000 • u/SwissMargiela • 2d ago
Water got up to the center console in the interior but didn’t reach any critical engine parts. Electronics still work which is astonishing. Car is absolutely soaked though. Do I even want this car back? I feel like totaling it is the way to go but idk. I don’t really have too much sentimental value with this car and was actually looking at selling it.
r/S2000 • u/hadumaru • 2d ago
Got an 06' NFR (pics attached) and I on the fence on getting silver MF10 with red caps (set available now) or wait for the bronze when they come up with red caps. Not sure if anybody has this set up but I think like the contrast of silver on red. Maybe can AI the image. Thanks!
UPDATE: pulled the trigger on bronze w/ red caps. Shipping from Kings mid December LFG!
where do you guys get your parts? recently picked up a ap1 and looking to do a oil change and would like to get the filter from honda instead of aftermarket “junk”. i also heard U.S honda parts are worse/different? from parts made in Japan
r/S2000 • u/RelativeDrawing9990 • 3d ago
Just drained my oil for winter and I’m seeing these very fine particles on my drain, not sure if this is normal. The larger ones are bubbles im talking about the ones on direct light. My car has no weird noises and hits vtec good so i have no issues with it but oil was kinda fine metallic when draining and could see the reflection.
Was using amsoil 10w30 signature.
r/S2000 • u/equitymans • 4d ago
AP1 was missing a diamond if not 2 every tank or 2 and after a change using valv restore and repair 5-30 it's been 2000 km and have yet to lose a diamond. I check daily waiting for the first one to come off and nothing.
Checking at same level grounded pump I've always used, driving habits unchanged outside of maybe ever so slightly calmer due to colder temps, and thus brings me to temperature. This is the only difference I can note since around the change was maybe it's been 5-8 C degrees colder most days but I don't even see how this would cause it.
My worry is something is up with to cause my dip stick to be reading full for some reason. Any help appreciated.
r/S2000 • u/Connect-Jackfruit718 • 4d ago
Mine have officially pooped the bed. They don't make pressure and my dumbass soaked them in alcohol to unclog them which made the paint slough off. And they still don't work. A new oem set is ridiculously expensive for some reason. Anyone have extras from a part out or something? I'm in central Florida and will pay for shipping.