r/VIDEOENGINEERING • • 10h ago

Are AI-generated diagrams the future of AV system documentation?

Post image
7 Upvotes

Every now and then, someone on this subreddit asks what the best tool is for creating system drawings, and the usual recommendations come up: Vectorworks, AutoCAD, Visio, etc.

Recently, an integrator handed us an as-built package that looked like this. It was generated using Claude, and we're a bit unsure what to make of it.

On the one hand, it looks pretty clear and well-organized. On the other hand, the cables aren't labeled with unique IDs, and we haven't been given any editable source files. So, what happens if we need to make changes to the installation down the road? How are we supposed to keep these drawings up to date? What should we be asking the integrator to provide? The "source code" or whatever underlying files were used to generate the diagrams?

We're also curious about the workflow behind this. What is the source data? Excel spreadsheets? I've been doing some research, and apparently you can ask Claude to generate diagrams in SVG format and then export them to PDF.

What's interesting is that the diagrams are actually quite accurate and consistent across audio, video and control systems.

What do you guys think? Are AI-generated diagrams the future of AV system documentation? Is anyone still drawing everything manually in AutoCAD, or are we starting to move towards a completely different workflow?


r/VIDEOENGINEERING • • 11h ago

Free list: factory default IPs and logins for PTZ cams, Dante gear, consoles and AV-over-IP, sorted by IP

40 Upvotes

Collected the factory defaults for 111 AV devices into one table, sorted by address, so an unknown device answering on 192.168.x.x can be matched to a maker: https://avipmagic.com/devices/default-ip-list

Each entry has its own page with the mask, ports, reset procedure and how to find it. Corrections very welcome; defaults move between firmware versions, and I'd rather fix them than have someone trust a wrong one.

(It comes from a Windows tool I make, AvIP Magic, but the list itself is free.)


r/VIDEOENGINEERING • • 14h ago

Old IDX VL-2 charger flashing orange (Battery Fault) with IDX DUO-C190 — Normal compatibility issue?

Thumbnail reddit.com
1 Upvotes

​Hey everyone, trying to sanity-check a compatibility issue with my V-mount gear before buying another charger.

​I have an older IDX VL-2 2-channel charger (from around 2007) and an IDX DUO-C190 battery. Whenever I mount the DUO-C190 onto either channel of the VL-2, the status LED immediately flashes orange (Battery Fault) and refuses to charge.

​Here is what I've already tested to rule out a broken battery or charger:

​The DUO-C190 charges completely fine on a newer IDX VL-4X charger at work (solid red LED, no issues).

​The old VL-2 charger works and charges my third-party Beillen V-mount batteries without any problems.

​Cleaned all 5 pins on both the charger and the battery, and tried both channels.

​Is it normal for the older VL-2 chargers to not recognize newer DUO-C series batteries due to communication protocol/firmware differences? Has anyone else run into this exact issue, and can you confirm if an IDX VL-2X will definitely charge the DUO-C190 without issues?

​Thanks in advance!


r/VIDEOENGINEERING • • 22h ago

Meet Deckboy

Thumbnail
github.com
38 Upvotes

Enough people have posted their apps that I feel Deckboy might as well have its chance with the subreddit it was made for.

Meet Deckboy, a fully open-source, cross-platform media playback and manipulation tool I've been working on.

Deckboy is licensed under GPL 3.0 and actively developed. I'm currently working on Deckboy Pocket for Android, with iOS to follow.

I'm a video engineer myself, and I've spent the last year and a half trying to build the most useful toolset I can imagine for live video.

I'd love to hear your thoughts and opinions, and apologies if this offends anyone here. I'm genuinely trying to build a better tool for all of us.

Peace. ✌️


r/VIDEOENGINEERING • • 23h ago

What would a free Windows playback app need before you'd trust it in your rack? (VisualDeck 1.0, open source, gaps listed)

5 Upvotes

I make VisualDeck, a free and open-source (MPL-2.0) cue-based playback app for Windows. 1.0 just shipped, and I'd rather hear what's missing from people who run playback for a living than guess.

Where it is today:

- Cue grid with GO / BACK / Blackout, follows, fades, blind edits with Update Output, locked show files

- HAP / HAP Alpha / DXV / ProRes 4444 / H.264 / HEVC; next cue preloaded for clean cuts

- Multiple outputs with per-layer routing, corner pin, mesh warp, edge blending, test patterns

- OSC, an HTTP API with JSON status, MIDI, MSC, MTC/LTC triggers, Art-Net/sACN in and out

- Output Health with p50/p99 frame timing, late frames and per-decoder stats

- A 72-hour unattended soak before release: 12,959 cue changes, 0 render errors, 0.48% late frames

Where it isn't:

- No NDI, no SDI/DeckLink, no genlock, no Spout

- Timecode triggers cues at their time; it doesn't chase

- Show control tested against the specs, not yet against real consoles

- Windows only; installer not code-signed yet

So, honestly: what's the first thing on that second list that would have to change before you'd use it on a gig? And if you've got a Companion or a timecode source handy, I'd love a bug report.

Free, no account: https://visualdeck.org

Source: https://github.com/michaelchagnon/VisualDeck

(I'm the dev.)


r/VIDEOENGINEERING • • 1d ago

None standard HDMI resolution

3 Upvotes

Hi chaps.

I have 4 Christie Roadster projectors that have a 1400 x 1050 native resolution.

What I’d like to do is have one 2800 x 2100 HDMI output that I can split into 4 x 1400 x 1050.

Is there anything on the market that can do this for me?

Thanks


r/VIDEOENGINEERING • • 1d ago

Roland V160HD and Livestream Studio Encoding Frame Rate Issue

1 Upvotes

Having a bizarre issue that I've seen referenced in a few places online, but never concretely with this switcher/software setup.

Livestream Studio sees my V160 as inputting a frame rate of 60.02fps. My project format is set to 1080p60, which means the in-software converter is always engaged, since the software believes it needs to convert the 60.02 to 60 in order to match project frame rate.

The issue persists when setting switcher to 59.94 (software sees 59.97) and using a converter like the Roland UVC HDMI-USB, but I'm sharing our current settings for the conference we're on this weekend.

We are pretty sure (though don't remember 100%) that we have also seen this issue with OBS, though we don't stream with it regularly. To me, this would imply that it was a Mac hardware issue - is it possible for this to have persisted so long across multiple generations of Mac?

The issue persists when setting switcher to 59.94 (software shows 59.97) and using a converter like the Roland UVC HDMI-USB.

System details:

- Mac M1 Pro OS version Tahoe 26.7 (has persisted long before recent OS updates across multiple generations of Mac, including last gen Intel machines)

- Livestream Studio 6.35.350

- Roland V160 HD Firmware version 3.20

- System format 1080p 60Hz

- USB stream out 1080p 60Hz, USB 3.0, YUY2

Using a compatible, supported, high speed USB-C cable (one of the ones from the Roland site, don't remember which exactly)

Any insight into this would be helpful!


r/VIDEOENGINEERING • • 1d ago

Sony HDC-P50 or P31, long-term rental Dec–March (Eastern Canada)

2 Upvotes

Hey all,

I’m looking for a Sony HDC-P50 or P31 (open to either) for a long-term rental from December to the end of March. I’m based in Eastern Canada (Montreal area), so anything in Quebec / Ontario / the Maritimes would be ideal, but I’m open to shipping if the deal makes sense.

I’m also seriously considering buying used if the price is right, so if you’ve got one sitting on a shelf that you’re looking to get rid of, hit me up.

Rental houses, production companies with idle gear, or individuals are all welcome. Drop a comment or DM me with what you have and your rates or price.

Thanks!


r/VIDEOENGINEERING • • 1d ago

G&D IP KVM Matrix vs IHSE

4 Upvotes

Have IHSE Enterprise with 3G cards and extenders. Very expensive to add units and nearly maxed out on our frame.

I have been eyeing G&D and is nearly the same cost to replace entire system than to add 10 new stations to current matrix frame. Plus I don’t need to have a dedicated fiber pair per display, I can do dual head over a single cable, no extra daughter board for USB data, etc. A lot of kit in a nice package.

Plus IP is really intriguing to us, and would unlock some nice flexibility (also open some fiber ports) like VM KVM software defined CPU units.

Anyone got user testimonials about one or the other?

IHSE is rock solid and just works - looking for that level of reliability going to the future.


r/VIDEOENGINEERING • • 2d ago

Real-Time viewing analog S-Video 4fsc files in the software world

10 Upvotes

This is a quick snip from the tbc-tools v3.3.2 release the pipeline for handling decoded video and audio from projects like vhs-decode and tape-decode-rust (real-time Rust fork) which handle FM RF Archival processing of well FM RF archives of tapes today, all 100% free and open-source as good archival tools should be to last.

What makes this special is not the playback of the full-frame signal per-say but the fact we now can do it with modern chorma decoders (like the BBC Transform 3D decoder) processing the colour in real-time and rate locked allowing an D2/D3 NLE like experience replicated digitally as these are 4fsc decoded frames on file.

I thought it would be neat to share here considering a lot of people have not seen what a true full-frame sync-locked image looks like on a CRT, (NTSC in this case) but in the digital domain with the contrast offset of the VBI space as most people only see the active picture area.

(Red border is selecting that area for export preview as its a off-set nightmare with real-world tape archival)


r/VIDEOENGINEERING • • 2d ago

Ross Video Dashboard Pro

6 Upvotes

I need someone who can build a custom dashboard view for me. We have a 2016 Carbonite 1me. It does not support Soft Panel so I need one custom built. Help appreciated.


r/VIDEOENGINEERING • • 2d ago

Barco E2 Multiview

2 Upvotes

Scratching my head right now.... I had input sources and backgrounds from 2 separate but linked chassis visible on my mulitview. Now sources from each chassis can only be dropped into multiviews from their respective chassis. If I don't have the correct unit selected in the mulitview drop-down menu then All it's sources are greyed out. All sources and backgrounds are set to global.

I had a background from one chassis and and source from a second chassis overlayed on top. The only change I made before I noticed the issue was that added a couple more 1080 inputs to one of the chassis... now my mulitview won't accept sources or backgrounds from the other chassis.

I cleared all all sources and backgrounds from my multi-view and I cleared all sources from my destinations. The problem persists. My links are good. All sources and MVRs are set to global.

Can anyone explain what I'm missing?


r/VIDEOENGINEERING • • 3d ago

Scope question

Thumbnail
gallery
12 Upvotes

I've been learning about color and scopes recently but i dont fully understand this.

If the top of a waveform is full white (R:255 G:255 B:255) and the bottom is full black (R:0 G:0 B:0), then why does 100% green show up higher up than 100% magenta?

I would expect them to be the other way round since green is R:0 G255 B:0, and magenta is R:255 G:0 B:255.

Surely this would put Full green 1/3rd the way up and magenta 2/3rds the way up?

On that note shouldn't all CMY be at 66.6% since two values are at 255, and RGB be at 33.3% since only one value is at 255?

(The test image was rendered at 8 bit RGB full range, and a color picker confirms the values are correct.)

Thanks in advance for any help.


r/VIDEOENGINEERING • • 3d ago

Evertz 5600MSC Cooling Fan Replacement

3 Upvotes

A cooling fan in our Evertz 5600MSC Master Clock has died. It was making a whining noise for a bit then the whine stopped and the Fault light came on. The error message confirms a cooling fan fault. Does anyone know the model of the fan or a compatible replacement? I didn't see anything listed in the manual or online. I'd like to avoid having to un-rack and unhook everything twice: Once to look inside and get the model of the fan and again to make the actual replacement. I emailed service@evertz.com but got no response.


r/VIDEOENGINEERING • • 3d ago

Cordial CVM12-50

0 Upvotes

Hello!

Does anybody have any experience with Cordial CVM12-50 UHD Flex coax cable? Max 30m SDI 3G runs.


r/VIDEOENGINEERING • • 3d ago

Elgato HD60 X PS5 GTA6 Streaming Issue

2 Upvotes

r/VIDEOENGINEERING • • 3d ago

Blackmagic 2110 & Evertz

11 Upvotes

Has anyone been able to successfully register nmos and route a blackmagic 2110 device with magnum? We have a 100g 8x8 io that we are playing with. Was not able to manually get the blackmagic to tune to a static address either.


r/VIDEOENGINEERING • • 4d ago

What's all the gear in this photo

Post image
180 Upvotes

Hi nerds. I'm trying to see if I can name all the gear in this photo from https://www.reddit.com/r/whatisit/comments/1xz0adk/crazy_6k_camera_array_at_nfl_game/

From top to bottom, so far I've got (stuff that is unknown is italicized and bold)

  1. Insta360 X3
  2. Blackmagic Pyxis 6K (fourteen of them)
  3. No idea on the tripod Mitchell Standard legs
  4. Radius Nimbus wind screen dead cat
  5. No idea on the mic boom
  6. Diety Timecode Slate
  7. Something on top of DJI SDR Transmission v2 (tx)
  8. SDI cable on top of
  9. EcoFlow Delta (not sure which model)
  10. DJI SDR v1 transmitter to the right of the EcoFlow
  11. A bunch of probably audio stuff in a bag aroud the Tech
  12. DJI SDR v1 receiver for wireless video
  13. Something mounted to the top left of a DJI SDR Transmission v2 (rx)
  14. OG Atomos Sumo 19

What do you see?

HARD Mode: What's the audio tech have?

I see a K-Tek StingRay Audio Harness v3
https://ktekpro.eu/en/shop/stingray-bags-2/harness-waistbelt-2/k-tek-kshrn3-stingray-audio-harness-with-real-back-support-exospine-with-removable-inner-belt-adjustable-to-most-body-sizes/


r/VIDEOENGINEERING • • 4d ago

RP120 with HE145?

0 Upvotes

Panasonic website says No, but manual has a few references to it that confuses me a ton. Did call them but I think they’re reading from the same web page I am. Anyone know for certain?


r/VIDEOENGINEERING • • 4d ago

How to Avoid Spaghetti Westerns, Noodle City, and Converter Controversy - Requesting F/BOH Setup Advice

18 Upvotes

Maybe its my ADHD. Maybe I was born with it. And maybe it ISN'T Maybelline.

Ive been an operator for a few years, but this past year I have been more of a tech where I am more involved in setup. I am capable of making sure all my ins and outs go to the right place. Converting from sdi to HDMI to fiber, NDI - etc. If we have everything planned perfectly, I can pre build a rack with extra DACs, or slide them on top of each other and gaff it to the table. But for some reason, clients keep on adding extra things on every show. "we need another monitor over here. We need an extra out over there. One guy cant come so can we set up a zoom station.

We often say yes because - hooray more rentals, more money. But when that all happens during the load in, my plans for layout turn into Rats nests and Magewells braided with DAs.

Is there any advice/tips/tricks to help keep your FOH a little more organized so you dont have to rely on a tech surround to cover the ugly mess of wires?

I feel like my superiors are also on this subreddit so if y'all are reading this - know that this post is strictly for professional development!


r/VIDEOENGINEERING • • 4d ago

Live Captions/Summaries

4 Upvotes

Hi all,

I’ve got quite a loaded question, wondering if someone can help?

I have a job next month where the client would like live captions onto a relay tv (easy, I’ve got options), however, they would also like a session summary in text after each session, as well as a transcript, that we would then upload to the event management app. Just wondering if anyone’s found an all in one solution? The closest match I could find is Wordly, however with multiple breakout rooms over 3 days, it seems really pricey. Not too concerned about pricing at the moment just need to gather some options

Cheers everybody!


r/VIDEOENGINEERING • • 4d ago

Where does each protocol actually fit? WebRTC vs RTMP vs HLS vs SRT vs RTSP, with real latency numbers

15 Upvotes

Disclosure: I work at Ant Media. We put together a side-by-side comparison of the main streaming protocols, and I thought it might be useful here.

Typical latency ranges from the guide:

- WebRTC: 0.2-0.5 s

- SRT: sub-second (depends on the network)

- RTSP: 1-3 s

- LL-HLS: 2-5 s

- RTMP: 3-6 s

- HLS: 8-30 s

The pattern it describes is the one many of us already run: RTMP, SRT or RTSP for contribution and camera capture, then a media server converting to WebRTC for interactive viewing and HLS/CMAF for large audiences.

Full write-up: https://antmedia.io/what-is-webrtc-and-how-webrtc-works/

I'd love to hear how you handle the contribution-to-delivery hop in your own pipelines. Any setups where this breaks down?


r/VIDEOENGINEERING • • 4d ago

Replace Yolobox

Thumbnail reddit.com
0 Upvotes