r/beetle • u/Middle-Entrance6324 • 19h ago
72 super is the control arm inner bushing suppose to do this side n side play?
Replacing the sway bar bushing as well
r/beetle • u/Middle-Entrance6324 • 19h ago
Replacing the sway bar bushing as well
I am planning on taping my fuel inlet as a safety precaution. My only question on it is when I install the screw in fitting should I apply any sealant to the fitting before tightening it? Either a permatex type thing or tape?
Thanks!
r/beetle • u/masterofnone505 • 18h ago
Hey everyone. Newbie here. I need help. This is my first ever air cooled and first time really getting into doing anything aside from relatively superficial engine modifications.
This is my 1966 beetle with a 1500cc engine. Prior to installing all new brake lines, fuel tank and soft fuel lines it was running well. Now it seems to be running on 2 cylinders and I cannot sort it out. Both 1 and 3 seem to not be firing.
I have attached a video of a drop test. If this helps anyone glean anything. There is a small amount of black smoke on when the throttle is applied and there is a smell of unburned fuel. I put in a new set of plugs and 1 and 3 were immediately wet and black.
The plugs, wires, rotor and distributor cap are all new. The valves have been adjusted to .006 in. I adjusted the point gap. Prior to installing any of these items I blew out the plug holes and tested the spark on every wire. To confirm they worked. I also confirmed the firing order as 1-4-3-2 on the Bosch 009 distributor
Any help would be greatly appreciated. I am feeling pretty defeated currently.